The Kramer FH10NN-4 provides an isolation boundary for supported USB keyboard and mouse connections. It is designed for standard wired HID peripherals.
FH10NN-4 Detailed Features
- Restrict a USB connection to supported HID use. The HID filter is intended for supported wired keyboard and mouse connections. It helps limit access through a USB connection that would otherwise accept a wider range of peripheral types.
- Help block unauthorized peripheral access. Restricting USB device access can reduce exposure to unsuitable storage devices and other unapproved peripherals. The filter should be configured or selected for the actual device policy of the installation.
- Keep approved input devices usable. The filter is designed to pass the supported keyboard and mouse functions while restricting other traffic. Confirm the actual peripheral model is supported before relying on it at the workstation.
- Use supported wired peripherals. The published hardware guidance supports most standard USB keyboards and mice and excludes wireless keyboards and mice. Connector compatibility alone is not sufficient to establish that a device will be accepted.
- Draw power from the computer USB port. The unit uses the PC USB connection for its power. This avoids a separate power adapter for the filter at the workstation.
- Fit the filter close to the host connection. The compact enclosure and short attached cable support installation near the computer or compatible equipment. Allow physical access for installation and any required configuration work.
Specifications
| Manufacturer part number | CPN30838 |
|---|---|
| PHYSICAL — Dimensions TX and RX | 30 (W) x 18.35 (H) x 59.5 (L) mm |
| PHYSICAL — Cable length | 141 mm |
| POWER — Power Requirements | Provided by PC USB Port |
| ENVIRONMENTAL — Operating Temperature | 32° to 104° F (0° to 40° C) |
| ENVIRONMENTAL — Storage Temperature | -4° to 140° F (-20° to 60° C) |
| ENVIRONMENTAL — Humidity | 0-80% RH, non-condensing |
| HARDWARE — Supported Hardware | The filters support most standard USB keyboards and mice. Wireless keyboards and mice should not be used and are not supported. |
| GENERAL INFO — Manufactured | BAA & TAA Compliant |
| GENERAL INFO — Product life-cycle | 10 years |
Technical Questions and Answers
What does the FH10NN-4 do?
The Kramer FH10NN-4 provides an isolation boundary for supported USB keyboard and mouse connections. It is designed for standard wired HID peripherals.
What is specified for dimensions tx and rx?
30 (W) x 18.35 (H) x 59.5 (L) mm
What is specified for cable length?
141 mm
What are the power requirements requirements?
Provided by PC USB Port
What is specified for supported hardware?
The filters support most standard USB keyboards and mice. Wireless keyboards and mice should not be used and are not supported.
What is specified for product life-cycle?
10 years
Where can I check installation compatibility?
Use the manufacturer documentation linked below to verify the exact model, connections and installation requirements before installation.
How do I identify the correct version?
Match model FH10NN-4 and manufacturer part CPN30838 when ordering.
Choosing the Right Product
What is the Kramer FH10NN-4 used for?
It is used for wired keyboard and mouse connections requiring HID isolation. Provides an isolation boundary for supported USB keyboard and mouse connections. It is designed for standard wired HID peripherals.
Who should choose the FH10NN-4?
Choose this model when your project needs wired keyboard and mouse connections requiring HID isolation. Compare the model-specific connections and specifications above with the equipment in your system.
What should I check before ordering the FH10NN-4?
Confirm manufacturer part CPN30838, the required connections and the installation requirements. Use the linked documentation to check compatible equipment and required accessories.
