HDTV Supplys WolfPack™ 4K 1x14 HDBaseT Splitter allows you to control the outputs of the splitter with an app. The 19" Rack Mount Chassis back plane allows one 4K-HDMI Input to be split to 14-4K Outputs using 14-4K HDBaseT extenders with POC (which are included). We only use HDBaseT technology as it sends uncompressed video & audio with zero latency upwards of 220 feet at 1080p & 4K at 110 feet using one CAT6 cable. The picture quality is like using a 3 foot HDMI cable. The base model of this 1x14 HDBaseT Splitter is HDTV Supplys Modular HDMI Matrix Router and is preconfigured with 1-female HDMI input and 14-HDBaset outputs and comes with 14-HDBaseT receivers. By having 1-port slide in cards the 1x14 HDBaseT Splitter is very reliable as in the unlikely even there is a loss of signal you just replace the card with a spare you have purchased or order another from us. The complete splitter does not have to be sent to us for a repair.
The unique feature of this 1x14 HDBaseT Splitter is that you have complete control of each one of the 14-outputs of which you can either turn OFF or turn ON the signal going to the 14-displays. Usual 1x14 splitters do not allow you to do that. You control the outputs of this 1x14 HDBaseT splitter with an IOS or Android app, front buttons, WEB GUI control or the RS-232 serial port. It also has optional URC, Elan & 2-Way Control4 drivers and more. Other features will allow you to add more outputs to a total of nine and even growing it to a full 4K matrix switch in the future by buying HDMI input cards.
The benefit of having individual OFF and ON control of any output is that it can be used in installations where you may not want to send the picture, audio or video to all screens like in Q/A testing facilities, factories, schools and universities, military installations and in homes where you may want to shut off the cable box to the kids rooms while they're doing their homework. You can even save up to 40-Presets for often used scenes.
Reasons that sets our WolfPack™ 1x14 HDBaseT Splitter apart from others:
Complete control of the HDBaseT outputs
Field Upgradable
Breakout R/L audio on the input card to go to an amp
Additional HDMI output for a local monitor
Power Over Cable (PoC) design means there are no AC adapters needed at the TVs.
4K/30 for the best picture, 4X better than 1080p
HDCP 1.4 compliant on all inputs and HDBaseT Receivers
Includes the best HDBaseT HDMI to CAT6 extenders, not cheap H.264 w/fuzzy compressed video
40 - Programmable Preset Scenes To Choose From
No latency
Control of the outputs via an iPad, Android, Web Browser (WEB GUI), RS232 & Front Buttons
2-Year WolfPackCare Advance Replace Warranty
Free Lifetime Telephone, CHAT, TEXT and Email Tech Support
Other In & out cards available like VGA, DVI, Fiber, SDI, CVBS, YPbPr and Audio
WolfPack™ 1x14 HDBaseT Splitter Configuration:
1 - Small 2U 4K 18-card in & 18-card out card cage chassis
1 - 1-port 4K HDMI input card with separate audio out
1 - 1-port 4K HDMI output card for a local monitor
14 - 1-port 4K HDMI HDBaseT output cards w/POC
14 - 4K HDBaseT receivers to 220 feet at 1080p & 4K/30 at 110 feet
HDTV Supplys implementation of the HDBaseT technology and this product adds virtually zero latency to the HDMI audio and video signal, less than 7 microseconds (0.000007 sec) over 220 feet of CAT6 cable. At 100 feet you are talking about 3 microseconds (0.000003 sec). This means for example, in a factory, church or auditorium, the speakers lips are always in synch with the video image on all the TVs and projectors 100's of feet away.
1x14 HDBaseT Splitter Features:
4K Chassis size: Supports 18 input and 18 output cards
1-Input Card:
1 - 4K Input HDMI card with a separate 3.5mm audio out
14 - 4K Output Cards:
1 - 1-port 4K HDMI output card for a local monitor
14 - 4K HDMI HDBaseT RJ45 output cards
14 - 4K HDBaseT Receivers to support 220 feet at 1080p & 4K at 110 feet
Advanced EDID management for rapid integration of sources and displays
Front-panel LCD display for status feedback
Dual IP controlled via built-in web server and LAN
Dual RS-232 Serial interface for remote control via an automation control system
Supports fast splitting without any black/ blue/ split screen in any of the TVs
Supports resolution exchanges with several resolutions can be chosen and used
Hot-pluggable
Rack-mountable
HDTV Supply, Inc. is an HDBaseT.Org Approved Adopter of HDBaseT™ Products.
Why not buy this 1x14 HDBaseT Splitter today?
Specs
Supports EDID Management: Ensures that even the most difficult display can receive audio and video with eight programmable memory presets loadable to any source connected to the matrix.
Modular HDBaseT Splitter Specs:
HDCP 1.4 Compliant
Locking HDMI connectors
Rack mountable metal enclosure with rack ears
Modular Configuration: 18 inputs and 18 outputs chassis
When one is designing an HDMI Matrix Switch the most important initial specification is the number of inputs and outputs you will need in your facility. The next, and often forgotten, is how the user wants to control those inputs and outputs. HDTV Supply has your back when you're buying one of our WolfPack Family of Modular Matrix Switchers as we have dozens of way to control the inputs and outputs and are shown at Controlling WolfPack Modular Matrix Systems, as well as below:
Free Android and iOS App: The IOS App for this WolfPack HDBaseT Splitter is in the Apple Application Store and when you SEARCH the key words "MCS" or "Matrix Control System" you can download and install it to your iPad or iPhone. Also from your iPad or iPhone click the following link...MCS-matrix control system to install it directly.
HDTV Supply has successfully installed our WolfPack, WolfPackLite and our other HDMI Splitters & Switchers in Sports Bars, Restaurants, Bowling Alleys, Fitness Centers, Malls, Places of Worship, Data Centers, Gaming Rooms, Nail Salons, County Clubs, Casinos, Factories, Conference Rooms, Schools, Home Theaters or many other installations requiring HDMI matrix switching. The reason, we are told by the users, is the number of features we offer compared to other companies they looked at.
This modular HDMI system can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.
For experienced AV hardware and software professionals who want to write their own drivers for 3rd party control systems from:
AMX™
Control4™ (we have)
Creston™
RTI™
DTVGameControl™
Elan g!™ (we have)
Media Switcher™
OnControls™
Savant™
SimpleControl™
SwitchItUp™
SAVI Control™
URC Control™
...and we have created a simple and very easy to use RS232 script to write your own drivers.
EXAMPLE: If you want to switch input 8 to output 1, 8, 16, the RS232 command would be x1&8&16. and notice the command has a period (.) at the end of the string. The matrix even replies "OK" when the right command is received and shows "ERR" when receiving a wrong command. Here is the RS232 User Manual if you want to write your own drivers.
How to use the info:
END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:
Call us for a quote
Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.
CAVEAT: We are not certified by any of the above 3rd party control systems companies nor have the necessary hardware to verify, troubleshoot and support the 3rd party writing of the code. We do warranty, though, that the RS232 script in the above RS232 Users Manual has and will work to control the matrix directly.
Below is a video of the WolfPack 9x9 card cage model showing the fast switching speed and its features. The larger 18x18 card cage model will operate exactly the same but will allow more input and output cards.
Below is a video of the WolfPack 9x9 card cage model showing the fast switching speed and its features. The larger card cage models will operate exactly the same but will allow more input and output cards.
Q: How many Preset scenes can I Save and Recall?
A: 40.
Q: What are the HDCP options?
A: You can choose either to open or close the HDCP on the output card. A receiver that cannot support HDCP can also display the sources with HDCP.
Mix-n-Match combinations:
Non-HDCP source to a HDCP compliant TV
HDCP source to a non-HDCP compliant TV
Q: What is you test procedure?
A: Our testing procedure is:
Assembling: Production line self-testing (Basic Functions)
Initial Testing: Includes every card, control software and front panel front buttons
24 Hours Aging: Gao Sheng Standard Aging Room
Final testing: All Functions
QC final Inspection: Sticker, serial number, etc
Packing: Pack and ship
Q: What is the dimension of the chassis?
A: 18x18: 4U - 482x390x178mm (L/W/H) - 18.97x15.35x7.01 inches
Q: Do you have any tips in the unlikely event the unit fails?
A: Turn it OFF and then disconnect the matrix from the AC power and all cables. Pull out each board from the rear and push back in. Plug all cables back in and turn it on.
Q: How is HDBaseT technology different than others?
A: Unlike other HD distribution technologies, HDBaseT is the only technology which enables CAT5/6/7 connectivity from 70 meters to 100 meters, depending upon the specific product, for uncompressed full HD multimedia content and up to 100 watts of charging power via a single cable. HDBaseT is optimized for video applications and can connect all HDBaseT enabled home entertainment devices. Also, HDBaseT technology has the capacity to deliver double the resolution available today to future 2K and 4K formats. Other existing solutions also require a specific cable and/or a new proprietary connector while HDBaseT utilizes the existing Ethernet infrastructure.
Keep cables away from any equipment with an electromagnetic wave, e.g., mobile phone, microwave, radio equipment, fluorescent lamp, high voltage power lines, etc.
CAT5/6 cables should not exceed 220 feet or (70m).
Please adhere to the TIA/EIA568B standards when terminating network cables in the field.
Shielded CAT5/6 with metal RJ-45 connectors are recommended to safeguard against random video flashes caused by electromagnetic interference (EMI).
Why not buy this 1x14 HDBaseT Splitter today?
Warranty
Click Here for Product Warranty
Why not buy this 1x14 HDBaseT Splitter today?
Pictures
Ask a Question
Questions & Answers
Ask a question about the 4K 1x14 HDBaseT Splitter w/14-HDBaseT Receivers & Output Control to 220' or Call 833-WOLFPACK (833-965-3722)
FAQ
Our WolfPack HDBaseT over CAT6 Extenders let set-top boxes, DVD players & other HDMI devices to be connected to HDMI displays that have an HDMI input that are >300 feet away from the source. These HDBaseT 2.0 & 1.4 products are the newest technology that supports HDMI 2.0, 1.4, 2D & 3D at >300 feet using only one CAT6 cable. By reducing the Ethernet cabling requirements from two to one, it allows you to easily tap into existing in-wall CAT6 wiring.
HDBaseT Video delivers full HD / 3D and 2K / 4K uncompressed video to a network of devices or to a single device (point-to-point ). Since the video is passed through the HDMI chipset, HDBaseT supports all key HDMI 1.4 and HDMI 2.0 features including EPG, CEC, EDID, and HDCP. HDBaseT is the only standard for delivering UltraHD 4K video up to 100m long.
HDBaseT audio passes through directly from the HDMI chipset and supports all standard formats including Dolby Digital, DTS, Dolby TrueHD and DTS HD-Master Audio.
These HDBaseT Products Feature:
Uncompressed video: The picture quality at 300 feet is the same as using a 3 foot HDMI cable.
No more cable clutter: Fewer cables and less mess with its single cable connection
Distance is no longer a concern: Runs over a 100m/328ft Cat5e/6 cable and support for multi-hops (8 x 100m), HDBaseT provides point to point connectivity and full
multimedia distribution with higher reliability, longer distance and lower
cost
Quality cable supports HD, 2D and 3D: HDBaseT utilizes a quality cable proven for transferring HD and new 3D formats
Power over cable: Some of our HDBaseT products sends 100W of power simultaneously eliminating the need for a power outlet to be installed near the display
Support for quality controls: HDBaseT supports various controls while ensuring reliability and low latency
Low cost installations: Requires only one low cost LAN cable with standard RJ-45 connectors already installed in many homes
These HDBaseT products can support full 3D with resolutions up to 4Kx2K (4 times the 1080p), audio, IR remote and Ethernet sent over the same CAT6 cable. Many also feature 3DTV, deep color, lip sync and audio delay w/both the IR back-channel and RS-232 connection can be used to control the display from the remote location. We at HDTV Supply love HDBaseT products as we never get returns nor tech support calls so place your HDBaseT order today.
Why not buy one of our HDBaseT products today?
Government
This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.
The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.
If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.
Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:
DUNS: 801957023
TIN: 260452583
CAGE: 4TBM6
Their SEWP Federal Contracts are:
SEWP Contract Number: NNG15SD38B
Group: Group B_SDVOSB
NAICS: 541519
and
SEWP Contract Number: NNG15SD88B
Group: Group C
NAICS: 541519
The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.
For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).
Catalog
HDTV Supply WolfPack Product Catalog (2020)
4K 1x14 HDBaseT Splitter w/14-HDBaseT Receivers & Output Control to 220'
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below
Call 833-WOLFPACK (833-965-3722) for Free Lifetime Tech Support or Product Suggestions )
HDTV Supplys WolfPack™ 4K 1x14 HDBaseT Splitter allows you to control the outputs of the splitter with an app. The 19" Rack Mount Chassis back plane allows one 4K-HDMI Input to be split to 14-4K Outputs using 14-4K HDBaseT extenders with POC (which are included). We only use HDBaseT technology as it sends uncompressed video & audio with zero latency upwards of 220 feet at 1080p & 4K at 110 feet using one CAT6 cable. The picture quality is like using a 3 foot HDMI cable. The base model of this 1x14 HDBaseT Splitter is HDTV Supplys 
