This HDTV Supply WolfPack 4K 30 Hz HDMI Extender delivers HDMI video and audio up to 120 feet in 4K resolution and includes a transmitter, receiver, and PoE-enabled power supply.
Each device uses a single CAT6 cable to transmit AV signals without signal loss, supporting 4K 30 Hz transmission and extending 1080p signals up to 220 feet.
Extend 4K 30 HDMI signals from laptops, gaming consoles, DVD players, and other HDMI sources to distant TVs, projectors, and monitors using a single low-cost CAT6 cable.
WolfPack 4K 30 HDMI Extender to 120 Feet Via CAT6 w/Bi-directional IR, EDID, POC & HDMI Loopout Features:
- HDCP 1.4 & HDMI 1.4 compliant
- Transmits and Receives HDMI Signals
- EDID (for accurate displays) compliancy
- Each set includes one sender (TX), one receiver (RX) & an AC adapter.
- Uses single UTP LAN cable (Cat6) to substitute HDMI cable to achieve long distance transmission, the UTP Cable follows the standard of IEEE-568B.
- Supports Deep Color up to 36 bits.
- Supports lossless compressed digital audio: Dolby TrueHD, DTS-HD Master Audio.
- Data transfer speed 10.2 Gbps.
Why not buy this WolfPack 4K 30 HDMI Extender to 120 Feet Via CAT6 w/Bi-directional IR, EDID, POC & HDMI Loopout today?
WolfPack 4K 30 HDMI Extender to 120 Feet Via CAT6 w/Bi-directional IR, EDID, POC & HDMI Loopout Specifications:
- HDMI resolution: 3D /4K@30hz/1080p/1080i/720p/576p/576i/480p/480i
- Support video color format: 24bit/deep color 30bit,36bit
- Support audio format: DTS-HD/DolbytrueHD/LPCM7.1/DTS/Dolby-AC3/DSD
- Max bandwidth: 2250MHz
- Max baud rate: 10.2Gbps
- Input/Output TMDS signal: .0.5~1.5Volts p-p (TTL)
- Input/Output DDC signal: 5Volts p-p (TTL)
- Input cable distance: ≤10m AWG26 HDMI standard cable
- Output cable distance: 1080P 8-bit 220 feet over single CAT6/7/24AWG/Solid
- Max working current: 5V/800MA
- Power consumption: 5watts (Maximum)
- Power adapter format Input: AC (50HZ, 60HZ) :100V-240V
- Operating Temperature range: -5 to +35℃(+23 to +95℉)
- Operating Humidity range: 0.5 to 90%RH (No Condensation)
- Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
- Weight: 2-lbs
Why not buy this WolfPack 4K 30 HDMI Extender to 120 Feet Via CAT6 w/Bi-directional IR, EDID, POC & HDMI Loopout today?
Q: What does the WolfPack 4K 30 HDMI Extender do?
A: It sends an HDMI signal up to 120 feet over a single CAT6 cable. Plug your source (like a Blu-ray, cable box, or PC) into the transmitter, run CAT6 to the receiver, and connect it to your TV or projector. You can also watch locally with the HDMI loop-out.
Q: What are the key specifications of the WolfPack 4K 30 HDMI Extender?
A: Key specifications:
- Supports HDMI up to 4K @ 30Hz (YUV 4:4:4)
- Transmission distance: up to 120 ft (CAT6).
- HDMI loop-out for a local display at the source
- Bi-directional IR so you can control devices from either end
- EDID pass-through for better source/display compatibility
- POC (Power Over Cable)—only one power adapter needed
- Complies with HDMI 1.4, HDCP 1.4, DVI 1.0
- Video bandwidth: 10.2 Gbps
Q: Why should I buy the WolfPack 4K 30 HDMI Extender?
A: Because it saves you from using long, expensive HDMI cables that may lose signal. Use one CAT6 cable to cover up to 120 feet while keeping 4K quality. Great for homes, churches, classrooms, offices, or bars where the source and display are far apart. The HDMI loop-out even lets you monitor locally.
Q: Do you have a Podcast of the WolfPack 4K 30 HDMI Extender?
A: No podcast. But you’ll find product videos and short demos showing how it installs and works.
Q: Is the WolfPack 4K 30 HDMI Extender in stock?
A: Stock changes daily. The quickest way is to check the product page or call HDTV Supply.
Q: What is the warranty of the WolfPack 4K 30 HDMI Extender?
A: One year. If it fails—say the receiver stops working—you send it back for repair or replacement. Extended coverage may be available.
Q: What is the return policy of the WolfPack 4K 30 HDMI Extender?
A: About 30 days, provided it’s unused and in the original packaging. Always review the HDTV Supply return policy before sending anything back.
Q: What is the phone number for tech support for the WolfPack 4K 30 HDMI Extender?
A: Call 833-965-3722. A support rep will help you with setup, cabling, or troubleshooting.
Still have questions? Reach out to our team for expert assistance.
