4K HDMI HDBaseT Extender to 220' w/RS232 & IR

Part Number:
Usually ships in 3-4 business days
WolfPack™ 4K 30 HDMI HDBaseT Extender
Also includes RS232 support
Bi-directional IR to/from Sources & TVs
Send 4K 30 up to 110' w/one CAT5e/6 cable
Send 1080p up to 220' w/one CAT5e/6 cable
WolfPack HDMI Extenders HDTV Supply's WolfPack™ 4K 30 HDBaseT HDMI Extender is an HDMI Receiver & HDMI Transmitter set that sends over a single CAT5e/CAT6 to 220 feet at 1080p and 110 feet to 4K/30. The set sends uncompressed audio/video with a POC feature with the added benefit of control through the built-in RS-232 and bi-directional IR ports. The HDMI HDBaseT Extender is designed is used to receive signals transported by the transmitter over the CAT5e/6 cabling. Once this unit receives these signals, it converts them back into their original HDMI format.

The HDMI signal source can be controlled by your existing remote control over one single home run CAT5e/6/7 cable and has 20~60kHz Wide band Bi-directional IR to support any remote control that you own. Our HDMI HDBaseT Extender also supports 4K video (30 Hz) to the below UTP cable lengths. Our HDMI Extender with POE also supports a Bidirectional Infrared control signal so you can control the Source and the widescreen or destination side 220 feet away, an RS232 control signal together with the HDMI signal.

NOTE: HDTV Supplys implementation of the HDBaseT technology adds virtually zero latency to the HDMI audio & video signal, less than 7 microseconds (0.000007 sec) over 220 feet of CATx cable. At 100 feet you are talking about 3 microseconds (0.000003 sec). This means for example, in a church or auditorium, the speakers lips are always in synch with the video image on all the TVs & projectors 100's of feet away.

WolfPack HDMI HDBaseT Extender Features:

  • 4K at 30 Hz compliant
  • Supports an uncompressed HDMI signal
  • Supports uncompressed audio such as LPCM
  • Supports uncompressed audio such as DTS Digital and Dolby Digital
  • HDMI 1.4 Compliant
  • The POE (Power Over Ethernet i.e. POC) function supports either the TX or RX being powered with the included power supply.
  • Use a single UTP LAN cable (CAT-5e/6) to substitute for a long HDMI cable to achieve long distances HDMI transmissions
  • CEC pass through
  • The UTP cable termination follows the standard of IEEE-568A or IEEE-568B.
  • Transmission distance over a single CAT6 cable up to 220 foot CAT6 cable:
    • 1080p @ 60Hz with 48 bit pixels
    • 1080p @ 120Hz with 24 bit pixels
    • 3D 1080p @ 60Hz with 36 bit pixels
    • 4Kx2K @ 30Hz with 24 bit pixels
  • Transfers a Bidirectional Infrared control signal together with the HDMI signal.
  • Transfers a Bidirectional RS232 control signal together with the HDMI signal
  • Support wide-band Bi-directional IR (38KHz to 56KHz)
  • IR extension from transmitter to receiver or from receiver to transmitter
  • Phoenix RS232 Port for RS232 control signal transmission
  • Supported resolutions:
    • 480i
    • 480p
    • 576i
    • 576p
    • 720p
    • 1080i
    • 1080p
    • 3D
    • 4Kx2K at 30 Hz
  • The HDMI HDBaseT Extender has zero compression and zero latency
  • Standard HDBaseT protocol
  • DVI-D compliancy
  • Compatible with HDCP 1.4
  • Supports DDC
  • Supports HDMI resolution up to 4K x 2K
  • Supports CEC pass through
  • Supports 3D pass through
  • With Built-in IR extender function.
  • Cat5e/6/7 cable follows the standard of IEEE-568B
  • IR remote control allowing any remote control due to it supports a wide 20~60kHz frequency and has Bi-directional IR transmission.
The RS232 ports can use it for controlling a projector or TV from the source end. Premium TVs and Projectors have a 2-way serial control port for the remote control. A system like Control4, Savant, Crestron can use our RS232 as the control instead of an IR or IP Network control.

Why not buy this WolfPack HDMI HDBaseT Extender today?

20~60kHz Wideband Bi-Directional IR: Over the same CAT5e/6/7 cable you can send commands from a control system to the TV as well as simultaneously control DVD players, cable boxes and other source equipment from the TV location. The IR works in only stand alone applications with one source and one TV. Extending your signals using Cat5e/Cat6 cables saves you money and is easier to run through walls and other compact areas. The HDMI extender includes an IR, which allows you to locate your Blu-ray, DVD player, or any other HDMI enabled device into another area of the room, such as a cabinet and have the ability to control it without pointing at the cabinet.

POE Designed: By utilizing POE technology both HDMI audio and video signals and power can be sent to a device via standard Cat5e/6/6a cabling. This means you do not need to install a power outlet at the device location and you can use readily available, relatively low cost Ethernet cabling with this this HDMI HDBaseT Extender.

For optimal video performance use our WolfPack HDMI 2.0b and HDCP 2.2 cables with this product.

HDMI HDBaseT Extender Specs:

  • Power supply: DC 5V 2A
  • HDMI signal: 4KX2K, compatible with HDCP; support CEC and 24bits deep color
  • Infrared back
  • Support 20~60kHz wide frequency devices and Bi-directional IR transmission. The supplied AC adapter needs to be put on the Receiver, not the Transmitter, if you are using the IR function.
  • Power consumption: TX: less than 3.5W, RX: less than 6W
  • Product dimension in inches: 4 x 2 x 1
  • Supports HDMI resolution up to 4K x 2K
  • Supports uncompressed HDMI signal
  • Supports uncompressed audio such as LPCM
  • Supports uncompressed audio such as DTS Digital and Dolby Digital
  • Supports CEC pass through
  • Supports 3D pass through
  • With Built-in IR extender function
  • Cat5e/6/7 cable follows the standard of IEEE-568B
  • Supports 5 play

HDMI HDBaseT Extender Contents:

  • 1 - HDMI HDBaseT Extender Transmitter
  • 1 - HDMI HDBaseT Extender Receiver
  • 1 - Manual
  • 1 - DC 12V 2A Power Supply
  • 1 - Wideband IR Blaster Extension Cable
  • 1 - Wideband IR Receiver Extension Cable

Why not buy this HDMI HDBaseT Extender today?

WolfPack HDMI Switchers HDTV Supply created our unique line of WolfPack™ line of products which are born from a hungry, circling pack of high performance video and audio HDMI that surround our competition to devour them. The WolfPack family is sleek, unique & swift & even the smallest configuration wolf can adapt himself to many hostile environments.

The Wolfpack™ family can roam long distances even some up to 300 feet over HDBaseT trails and howl 4K whereas those who try to trap the WolfPack fails & runs away to the older devices.

You can only get this one-of-a-kind WolfPack product from HDTV Supply.

Reasons To Buy an HDTV Supply WolfPack™Product:

  1. All WolfPack products have FREE HDTV Supply U.S. based Live Telephone Lifetime Tech support
  2. HDTV Supply has a dedicated TEXT support line at 805-409-0208 to support you
  3. HDTV Supply has a dedicated Product Manager for WolfPack products to assist with any special needs
  4. If there is a WolfPack firmware update for your product you will find it at our site
  5. Many times we will list lower refurbished WolfPack products at our site
  6. All WolfPack products are usualy in stock and ship the same week day if the order comes in by 12PM PST
  7. You can buy WolfPack products from us with most any credit card, your Amazon account and PayPal
  8. HDTV Supply has many videos to show the features of WolfPack products
  9. You will find all WolfPack User Manuals and other manuals at our site
  10. From time-to-time HDTV Supply runs Factory Authorized sales on WolfPack products
  11. All WolfPack products bought from HDTV Supply are brand new and in unopened boxes.
  12. All WolfPack products bought from HDTV Supply are shipped in double carton boxing.
  13. All WolfPack products bought from HDTV Supply have full value shipping insurance
  14. All WolfPack products bought from HDTV Supply have a 30-day No-Hassle returns
  15. All WolfPack products bought from HDTV Supply can be shipped blind to your customer
  16. HDTV Supply has shipped >1,000 WolfPack products throughout the world
  17. HDTV Supply ships all WolfPack products from here in the U.S.
  18. HDTV Supply stocks extra WolfPack accessories in case you misplace your remote or other unit
  19. HDTV pride ourselves on confidentiality and any personal information that you may share with us is kept absolutely private.

Why not buy one of HDTV Supplys WolfPack™ products today?

The HDBaseT technology allows both HDMI audio and video signals to travel over a single CAT5e, CAT6 or CAT7 UTP cable from the transmitter to the receiver. The UTP also transports the IR control commands from the display to the source.

Our HDMI HDBaseT Extender offers solutions for digitalentertainment center, HDTV retail and show site, HDTV, STB, DVD and Projectorfactory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

Why not buy this HDMI HDBaseT Extender today?

Q: I have no image output?
Check the LED indicator status to make sure all connections are good and stable.

Q: Does the remote IR work with a HDMI matrix switch or HDMI splitter?
These HDMI extenders will send both HDMI video and audio from a matrix or splitter, etc but the remote IR is designed to be used with only one source, like a cable box, to one widescreen. There would be too many IR cables to attach on the sources IR window. See our HDMI switchers and splitters that have it integrated. The supplied AC adapter needs to be put on the Receiver, not the Transmitter, if you are using the IR function.

Q: This HDMI HDBaseT Extender has CEC, what is CEC?
This HDMI HDBaseT Extender features CEC (Consumer Electronics Control) allowing your HDTV's remote to manage up to ten devices that are connected via HDMI (such as Blu-ray Disc players or home theater receivers) with no special programming needed. For example, you can use your remote to turn on your TV, your player, and your receiver at the same time, and adjust the system volume with one button. All devices must support CEC, though.

Most major TV manufacturers now support CEC, and an HDTV with HDMI 1.3 will likely have the technology. Manufacturers call it by different names; LG Electronics, for instance, calls its implementation SimpleLink, whereas Toshiba calls its version CE-Link. Interoperability isn't mandatory, so some manufacturers limit control to their own products; Sony, for one, allows only Sony-to-Sony communication.

Q: How is HDBaseT technology different than others?
Unlike other HD distribution technologies, HDBaseT is the only technology which enables CAT5/6/7 connectivity from 70 meters to 100 meters, depending upon the specific product, for uncompressed full HD multimedia content and up to 100 watts of charging power via a single cable. HDBaseT is optimized for video applications and can connect all HDBaseT enabled home entertainment devices. Also, HDBaseT technology has the capacity to deliver double the resolution available today to future 2K and 4K formats. Other existing solutions also require a specific cable and/or a new proprietary connector while HDBaseT utilizes the existing Ethernet infrastructure.

HDMI HDbaseT Extender Helpful Tips & Recommendations:

  • Keep cables away from any equipment with an electromagnetic wave, e.g., mobile phone, microwave, radio equipment, fluorescent lamp, high voltage power lines, etc.
  • CAT5/6 cables should not exceed 220 feet or (70m).
  • Please adhere to the TIA/EIA568B standards when terminating network cables in the field.
  • Shielded CAT5/6 with metal RJ-45 connectors are recommended to safeguard against random video flashes caused by electromagnetic interference (EMI).

Why not buy this HDMI HDBaseT Extender today?