The HDTV Supply WolfPack 4K 30 Hz HDMI Extender sends 4K HDMI video and audio up to 150 feet over a single CAT6 cable with no signal loss.

Extend 4K HDMI sources to TVs, projectors, and monitors up to 175 ft over a single CAT6 cable.

NOTE: This 4K 60 HDMI Ethernet Extender was designed to work in standalone applications only and cannot be used with HDMI Matrix Switchers or HDMI Switchers.

WolfPack 4K 30 Hz HDMI Ethernet Extender Features:

HDCP (content protection) compliant
Transmits and Receives HDMI Signals
EDID (for accurate displays) compliancy
Each set includes one sender and one receiver.
Use single UTP LAN cable (Cat6) to substitute HDMI cable to achieve long distance transmission, the UTP Cable follows the standard of IEEE-568B.
Transmission distance extends up to 60 meters under 4k@30hz.
Supports Deep Color up to 36 bits.
Supports lossless compressed digital audio: Dolby TrueHD, DTS-HD Master Audio.
Lossless transmission.
Data transfer speed 10.2 Gbps.
2-DC 5V power supplies

EDID Explained: The 4K HDMI Ethernet Extender has an EDID switch on the Sender. EDID provides for optimal source-to-screen performance. EDID will optimize the video card output for the capabilities of the end display. The EDID ghost unit enables the copying, emulating, cloning, and "learning" of EDID data from a display. Our 4K HDMI Ethernet Extender ensures proper operation, for the best performing HDMI audio and video signal between any source and display & resolves the loss of video, intermittent (flashing) video, snow, or color-space (purple or red) issues.