NTI E-ACLM-P12-V2 AC Power Monitor with Relay

NTI

NTI E-ACLM-P12-V2 AC Power Monitor with Relay
$360.00
Part Number:
E-ACLM-P12-V2
Availability:
In Stock
1:
Reports AC Voltage, Frequency and Current
2:
Auto-Configured Upon Connection With E-xD
3:
AC Power Monitor with Relay
4:
Free 15-Day Trial (See below FAQ)
5:
Free USA Shipping
6:
2-Year NTI Warranty
ADD OPTIONS:
NTI E-ACLM-P12-V2 AC Power Monitor with Relay

NTI E-ACLM-P12-V2 AC Power Monitor with Relay is a sensor for the E-16D/5D/2D systems (ENVIROMUX) capable of monitoring AC line input voltages and frequencies between 50~250V AC and 47~63Hz from two separate AC lines. It will report the current RMS AC Voltage and AC Frequency (Hertz) to the E-xD. The ACLM-V will also monitor the number of short term Swells1 and Sags2 as well as the number of Spikes3.

The ACLM-V utilizes two UL certified IEC 320 C14 inlets to connect to the AC lines being monitored. The ACLM-V connects to the ENVIROMUX through up to 1,000 ft of CAT5/5e/6 cable. Data is transmitted to and from the ENVIROMUX using the RS485 protocol.

NTI E-ACLM-P12-V2 AC Power Monitor with Relay Features:

  • 12 bit ADC resolution, 1% full scale ADC accuracy
  • Measure AC Voltage (1% @25°C accuracy) and AC Frequency (1% accuracy)
  • Monitors swells, sags, and spike events
  • Auto-Configured upon connection with E-xD
  • RJ45 Status LED's for operating status
  • User selectable data interpolation options

Why not buy this NTI E-ACLM-P12-V2 AC Power Monitor with Relay today?

NTI E-ACLM-P12-V2 AC Power Monitor with Relay Specifications:

  • Reports AC Voltage, Frequency, Power, and Current.
    • Monitors Power from one AC inlet to one AC outlet, between 50~250VAC and 47~63Hz.
    • Monitors the number of swells, sags, and spikes.
      • Monitors swell and sag duration of 0.1 second to 1 minute.
  • Includes Relay with configurable disconnect settings: threshold reboot, or manual reboot.
  • Accuracy
    • Voltage accuracy: ±1% FS at 32 to 104°F (0 to 40°C).
    • Frequency accuracy: ± 1%
    • Current accuracy: ± 2.7%
  • Outlet Max load rating (continuous):
    • E-ACLM-P18-V2 (US/Canada): 18A rated load, 20A maximum.
    • E-ACLM-P12-V2 (US/Canada): 12A rated load, 15A maximum.
    • E-ACLM-P8-V2 (Euro/UK): 8A rated load, 10A maximum.
  • Capable of measuring current surges from 300 mA to 20A.
  • User defined minimum and maximum voltage and power thresholds.
  • Capable of detecting user selected spike events with a peak greater than 50V, 250V, 500V, or 1KV.
  • Cables included:
    • E-ACLM-P12/8-V2: one country-specific IEC 320 C13 line cord, and one IEC 320 C14 to IEC 320 C13 cord set for connection to AC load.
    • E-ACLM-P18-V2: one L6-20r to IEC 320 C20, and one L6-20p to IEC 320 C19.
  • Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
    • E-2D/5D: supports CAT5/5e/6 cable up to 750 ft (229 m).
  • Dimensions (WxDxH) in:
    • E-ACLM-P12/8-V2: 7.0x5.5x1.65 (178x140x42 mm).
    • E-ACLM-P18-V2: 7.0x6.5x1.65 (178x165x42 mm).
  • Weight: 1.6 lbs (726 g).
  • Current consumption: 13mA @ 5VDC, 125mA @ 12VDC.
  • Powered by E-2D/5D/16D.
  • Regulatory approvals: CE, RoHS
  • Compatible with E-FSC Fiber Converter/Extender.
    • Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.

Why not buy this NTI E-ACLM-P12-V2 AC Power Monitor with Relay today?

Frequently Asked Questions
Reasons To Buy an NTI Product

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4Ă—2 — 4 sources to 2 displays
  • 4Ă—4 — 4 sources to 4 displays
  • 8Ă—8 — 8 sources to 8 displays
  • 8Ă—9 — 8 sources to 9 displays
  • 16Ă—16 — 16 sources to 16 displays
  • 16Ă—32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.