NTI E-ACLM-P8-V2 AC Power Monitor with Relay

NTI E-ACLM-P8-V2 AC Power Monitor with Relay is a sensor for the E-16D/5D/2D systems (ENVIROMUX) capable of monitoring AC line input voltages and frequencies between 50~250V AC and 47~63Hz from two separate AC lines. It will report the current RMS AC Voltage and AC Frequency (Hertz) to the E-xD. The ACLM-V will also monitor the number of short term Swells1 and Sags2 as well as the number of Spikes3.

The ACLM-V utilizes two UL certified IEC 320 C14 inlets to connect to the AC lines being monitored. The ACLM-V connects to the ENVIROMUX through up to 1,000 ft of CAT5/5e/6 cable. Data is transmitted to and from the ENVIROMUX using the RS485 protocol.

NTI E-ACLM-P8-V2 AC Power Monitor with Relay Features:

12 bit ADC resolution, 1% full scale ADC accuracy
Measure AC Voltage (1% @25°C accuracy) and AC Frequency (1% accuracy)
Monitors swells, sags, and spike events
Auto-Configured upon connection with E-xD
RJ45 Status LED's for operating status
User selectable data interpolation options

Why not buy this NTI E-ACLM-P8-V2 AC Power Monitor with Relay today?

NTI E-ACLM-P8-V2 AC Power Monitor with Relay Specifications:

Reports AC Voltage, Frequency, Power, and Current.
- Monitors Power from one AC inlet to one AC outlet, between 50~250VAC and 47~63Hz.
- Monitors the number of swells, sags, and spikes.
  - Monitors swell and sag duration of 0.1 second to 1 minute.
Includes Relay with configurable disconnect settings: threshold reboot, or manual reboot.
Accuracy
- Voltage accuracy: ±1% FS at 32 to 104°F (0 to 40°C).
- Frequency accuracy: ± 1%
- Current accuracy: ± 2.7%
Outlet Max load rating (continuous):
- E-ACLM-P18-V2 (US/Canada): 18A rated load, 20A maximum.
- E-ACLM-P12-V2 (US/Canada): 12A rated load, 15A maximum.
- E-ACLM-P8-V2 (Euro/UK): 8A rated load, 10A maximum.
Capable of measuring current surges from 300 mA to 20A.
User defined minimum and maximum voltage and power thresholds.
Capable of detecting user selected spike events with a peak greater than 50V, 250V, 500V, or 1KV.
Cables included:
- E-ACLM-P12/8-V2: one country-specific IEC 320 C13 line cord, and one IEC 320 C14 to IEC 320 C13 cord set for connection to AC load.
- E-ACLM-P18-V2: one L6-20r to IEC 320 C20, and one L6-20p to IEC 320 C19.
Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- E-2D/5D: supports CAT5/5e/6 cable up to 750 ft (229 m).
Dimensions (WxDxH) in:
- E-ACLM-P12/8-V2: 7.0x5.5x1.65 (178x140x42 mm).
- E-ACLM-P18-V2: 7.0x6.5x1.65 (178x165x42 mm).
Weight: 1.6 lbs (726 g).
Current consumption: 13mA @ 5VDC, 125mA @ 12VDC.
Powered by E-2D/5D/16D.
Regulatory approvals: CE, RoHS
Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.