Marshall CV-BSE-CBLE 2-foot Hirose Camera Breakout Cable

The Marshall CV-BSE-CBLE is a two-foot camera breakout cable that brings power, control and audio connections out from the camera Hirose interface. It provides both local menu access and connections for a remotely operated camera installation.

Marshall CV-BSE-CBLE Features

• Local setup at the cable. An integrated OSD joystick provides camera-menu access without requiring a separate remote controller for local setup. The two-foot breakout gives some separation between the camera connection and these accessible controls.
• Remote control and DC connection. RS-485 positive and negative wires provide serial-control access, alongside the 12 V, 2.1 mm power connection. These interfaces support wiring a compatible camera into a fixed production rig.
• Audio access through the breakout. The TRS mic/line input provides a connection for an appropriate external audio source. Use the camera's supported audio mode when choosing between microphone and line-level operation.