This DVDO Xtend-USBC-USB-100L 1-Host USB-C & USB-A 3.0 100m Extender over HDBaseT is a USB extender that can transmit USB 3.0 signals up to 100m/328ft via a single CAT6a cable.
The transmitter includes one USB-B host port. The receiver includes two USB-C and two USB-A device ports.
It can be widely used for long distance USB signal transmission between USB sources and devices like webcams, PTZ cameras, keyboards, mouse devices, USB microphones, flash sticks, printers, scanners, touch panel displays and other USB devices.
It supports bi-directional 24V PoC (Power over Cable), allowing the power supply to be connected to either the transmitter or the receiver.
DVDO Xtend-USBC-USB-100L 1-Host USB-C & USB-A 3.0 100m Extender over HDBaseT Features:
- Extension of USB 3.0 signals up to 100m/328ft via CAT6a cable
- USB 3.0 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
- Hardware acceleration for isochronous and bulk transfer
- Tx features 1x USB-B host port
- Rx features 2x USB-C (1x 5V@1A and 1x 5V@1.5A) and 2x USB-A device ports (1x 5V@1A and 1x 5V@1.5A)
- RS-232 and FSYNC GPIO pass-through
- Support bi-directional 24V PoC (Power over Cable)
- Plug-and-play with no drivers, downloads, or software required
Why not buy this DVDO Xtend-USBC-USB-100L 1-Host USB-C & USB-A 3.0 100m Extender over HDBaseT today?
DVDO-Xtend-USBC-USB-100L User Manual
DVDO-Xtend-USBC-USB-100L Datasheet
HDTV Supply partners with DVDO to sell and support all DVDO products
Why not buy this DVDO Xtend-USBC-USB-100L 1-Host USB-C & USB-A 3.0 100m Extender over HDBaseT today?
How far can the DVDO RS-4 extend 4K video over a single CAT5e/6 cable?
A: It can extend 4K@24 up to 164 ft (50 m) and 4K@60 (4:4:4) up to 115 ft (35 m) over a single CAT5e/6 cable.
Does the transmitter get power over the category cable (PoC)?
A: Yes — the receiver provides PoC power to the transmitter (PoC only from Receiver to Transmitter).
What video bandwidth limits apply to HDMI and USB-C inputs?
A: The HDMI input supports up to 18 Gbps and the USB-C input supports up to 5.4 Gbps video bandwidth.
Will the unit prefer one input if both HDMI and USB‑C signals are present?
A: Yes — in automatic mode when both HDMI and USB‑C are active the HDMI signal is preferred.
Can the transmitter's input be switched manually?
A: Yes — the wall plate transmitter has a SOURCE button for manual switching between HDMI and USB‑C inputs.
Does the wall plate provide a USB‑C charging port and what is its purpose?
A: Yes — the wall plate includes a second USB‑C port dedicated for charging connected devices.
Can this extender carry HDR and Dolby Vision with 4K signals?
A: Yes — the RS‑4 supports HDR10 and Dolby Vision with compatible 4K signals within its bandwidth and distance limits.
Will I get full 4:4:4 color at 4K60 over the maximum 115 ft distance?
A: The manual specifies 4K@60 4:4:4 can be extended up to 115 ft (35 m) over CAT5e/6, subject to the stated bandwidth limits.
