This DVDO Xtend-USBC-USB-100 1-Host USB-C & USB-A 3.2 Gen 1 100m Extender over HDBaseT is a USB extender that can transmit USB 3.2 Gen 1 signals up to 100m/328ft via a single CAT6a cable.
The transmitter includes one USB-C host port as well one USB-C and two USB-A device ports. The receiver includes two USB-C and two USB-A device ports.
It can be widely used for long distance USB signal transmission between USB sources and devices like webcams, PTZ cameras, keyboards, mouse devices, USB microphones, flash sticks, printers, scanners, touch panel displays and other USB devices.
It supports bi-directional 24V PoC (Power over Cable), allowing the power supply to be connected to either the transmitter or the receiver.
DVDO Xtend-USBC-USB-100 1-Host USB-C & USB-A 3.2 Gen 1 100m Extender over HDBaseT Features:
- Extension of USB 3.2 Gen 1 signals up to 100m/328ft via CAT6a cable
- USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
- Hardware acceleration for isochronous and bulk transfer
- Tx features 1x USB-C host port, 1x USB-C and 2x USB-A device ports
- Rx features 2x USB-C (1x 5V@1A and 1x 5V@1.5A) and 2x USB-A device ports (1x 5V@1A and 1x 5V@1.5A)
- Bi-directional 24V PoC (Power over Cable)
- Plug-and-play with no drivers, downloads or software required
Why not buy this DVDO Xtend-USBC-USB-100 1-Host USB-C & USB-A 3.2 Gen 1 100m Extender over HDBaseT today?
DVDO-Xtend-USBC-USB-100 User Manual
DVDO-Xtend-USBC-USB-100 Datasheet
HDTV Supply partners with DVDO to sell and support all DVDO products
Why not buy this DVDO Xtend-USBC-USB-100 1-Host USB-C & USB-A 3.2 Gen 1 100m Extender over HDBaseT today?
How far can this extender carry USB 3.2 Gen 1 signals over network cable?
A: It can extend USB 3.2 Gen 1 signals up to 100 m (328 ft) over a single CAT6a cable.
What data throughput can I expect for USB 3.2 Gen 1 over the extender?
A: USB 3.2 Gen 1 connectivity is supported with data rates up to 5 Gbps.
Can I power only one unit and have the other operate over the cable?
A: Yes; it supports bi-directional 24V Power over Cable so powering either the transmitter or receiver supplies the other end.
What USB ports are available on the transmitter and receiver?
A: The transmitter has 1 USB-C host plus 1 USB-C and 2 USB-A device ports, while the receiver has 2 USB-C and 2 USB-A device ports.
Does the device require drivers or software on the host?
A: No; it is plug-and-play and requires no drivers, downloads, or software.
Can I use this extender for a USB webcam or PTZ camera 100 m away?
A: Yes; the extender supports long-distance USB transmission for webcams and PTZ cameras up to 100 m over CAT6a, using USB 3.2 Gen 1 up to 5 Gbps and with backward support for USB 2.0/1.1.
What are the maximum power draw numbers for the transmitter and receiver?
A: The manual lists maximum power consumption as TX: 23 W, RX: 35 W, and TX+RX: 68 W (including line loss).
