This DVDO Xtend-USBC-USB-WB-1 2-Host USB-C & USB 3.2 Gen 1 100m Extender over HDBaseT is a USB extender that can transmit USB 3.2 Gen 1 signals up to 100m/328ft via a single CAT6a cable.
The wall plate transmitter includes one USB-C and one USB-B host ports as well two USB-A device ports. The receiver includes one USB-C and three USB-A device ports.
It can be used for long distance signal transmission between USB sources such as laptops and desktop computers and USB devices such as webcams, PTZ cameras, keyboards and mice, microphones, speakerphones, printers, scanners, touch panel displays, etc…
It supports bi-directional 24V PoC (Power over Cable), allowing the power supply to be connected to either the transmitter or the receiver.
DVDO Xtend-USBC-USB-WB-1 2-Host USB-C & USB 3.2 Gen 1 100m Extender over HDBaseT Features:
- Extension of USB 3.2 Gen 1 up to 100m/328ft via CAT6a cable
- USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
- Hardware acceleration for isochronous and bulk transfer
- Wall plate Tx features 1 x USB-C + 1 x USB-B selectable input ports and 2 x USB-A device ports
- Auto switching and manual switching modes
- Rx features 1 x USB-C and 3 x USB-A output ports (2 x 5V@1A and 2 x 5V@1.5A)
- RS-232 pass-through and API control
- Firmware upgrade via USB-C service port
- FSYNC GPIO pass-through for industry camera use
- Bi-directional 24V PoC (Power over Cable)
- Plug-and-play with no drivers, downloads or software required
Why not buy this DVDO Xtend-USBC-USB-WB-1 2-Host USB-C & USB 3.2 Gen 1 100m Extender over HDBaseT today?
DVDO-Xtend-USBC-USB-WB-1 User Manual
DVDO-Xtend-USBC-USB-WB-1 Datasheet
HDTV Supply partners with DVDO to sell and support all DVDO products
Why not buy this DVDO Xtend-USBC-USB-WB-1 2-Host USB-C & USB 3.2 Gen 1 100m Extender over HDBaseT today?
How far can this extender carry USB 3.2 Gen 1 signals over HDBaseT/CAT cable?
A: It can extend USB 3.2 Gen 1 up to 100m / 328ft over a single CAT6a cable.
What maximum USB data rate does the Xtend-USBC-USB-WB-1 support?
A: The device supports USB 3.2 Gen 1 data transfer rates up to 5 Gbps.
Can I power the system from either end of the CAT cable?
A: Yes — the product supports bi-directional 24V Power over Cable, so you can supply power to either the transmitter or the receiver.
Does the product provide RS-232 and API control for integration, and how do I connect?
A: Yes — it offers RS-232 pass-through and API control via the 3‑pin phoenix RS-232 ports or the SERVICE USB‑C virtual RS-232 (firmware/service) port.
Do I need a special cable type or wiring method for reliable operation?
A: Yes — the manual recommends using CAT6A F/FTP 23AWG cable and connecting by direct interconnection without cross‑connections.
Will I need drivers or software to use this extender with USB devices?
A: No — the unit is plug-and-play and does not require drivers or software downloads.
