HDTV Supply′s 1x8 HDMI Splitter with HDMI 2.0 Compliancy was designed to support a new display technology called 4K. The 1x8 HDMI Splitter with HDMI 2.0 Compliancy was created to improve the contrast between light and dark images for a more realistic picture featured in new 4K TVs. Since 4K is four times the resolution of 1080p, it required more bandwidth to support the extra data and that is why we have designed these HDMI Splitters with HDMI 2.0 Compliancy.
Our 1x8 HDMI 2.0 Splitter supports the latest 4K TVs, the NVidia Shield and the latest graphics cards with HDMI 2.0. To enjoy 4K 60Hz video be sure to use the TV′s HDMI port labeled with HDMI 2.0. HDMI 1.4 ports only support 4K at 30Hz.
Newer AV surround sound receivers have only one HDMI 2.0 and HDCP 2.2 input and output so this HDMI 2.0 splitter will allow you to send HDMI 2.0 and HDCP 2.2 compliant signal to 8-4K TVs. Also HDMI 1.4 supported 4K resolutions but only at 24 or 30 frames per second and HDMI 1.4 limits 4K content to 8-bit color. Our new HDMI 2.0 products can handle 4K video up to 60 frames per second and up to 300 MHz / 10.2 gigabits per second.
1x8 HDMI Splitter with HDMI 2.0 Compliancy Features:
1 HDMI input signal split to 8 HDMI devices with all showing the same picture.
4K Sony PS4 Pro
Samsung UHD 4K DVD Player
Roku 4 media player
4K DirecTV Genie receivers
4K Sony FMP-X10 UHD players
4K NVidia Shield UHD Netflix devices
4K Amazon Fire Players
4K Surround Sound AV Receivers
and more 4K HD HDCP 2.2 devices
HDMI 2.0 compliant
HDCP 2.2 protocol compliant.
3D video format support including frame packing for all 3D formats up to a 297MHz ™DS clock rate.
Supports the high resolutions up to 3840X2160/60HZ
Support the highest rate of 6G and ™DS clock can be up to 600 MHz
Supported video display resolutions:
Supported video format up to 4Kx2K @ 30Hz with 24bit
RGB/YcbCR 4:4:4 / YCBCR 4:2:2 and to 4Kx2K @ 60Hz with 12bit
Up to 1080p @ 120Hz
Up to 1080p 3D @ 60Hz and
All lower resolutions
Supported deep color bit rates:
36 bits and
48 bits per pixel
Supported Digital audio formats:
1x8 HDMI 2.0 Splitter Smart EDID Control Options:
STD Mode: The splitter will use its own built-in EDID: the video output will be set to 1080p@60Hz and the audio output at LPCM 2CH Stereo. Use this mode if there are display issues in TV Mode.
TV Mode: The splitter will read the EDID of the display connected to HDMI OUT 1. If it detects a 4K capable EDID it will transmit the signal in that format to all outputs. If no 4K capable EDID is detected then the splitter will output the best resolution that all displays can support
Our 1x8 HDMI Splitter with HDMI 2.0 Compliancy distributes 1-HDMI source to 8-HDMI displays simultaneously. It can handle video up to a 4K at 60 frames per second and up to 10.2 gigabits per second assuring you of the finest 4K picture you can get.
Why not buy this 1x8 HDMI Splitter with HDMI 2.0 Compliancy today?
Even if you do not need HDMI 2.0 compliancy today you may in the future so why not buy this HDMI 2.0 splitter so you can be prepared when you get 4K products in the future?
1x8 HDMI Splitter with HDMI 2.0 Compliancy Features
4K@50/60, (2160p), which is 4 times the clarity of 1080p/60 video resolution
Up to 32 audio channels for a multi-dimensional immersive audio experience
Up to 1536kHz audio sample frequency for the highest audio fidelity
Support for the wide angle theatrical 21:9 video aspect ratio
Dynamic synchronization of video and audio streams
CEC extensions provides expanded command and control of consumer electronics devices through a single control point
HDTV Supply's new HDMI 2.0 products are designed to support a new display technology called High Dynamic Range (HDR). It was created to improve the contrast between light and dark images for a more realistic picture featured in new 4K TVs. The reason for the switch to HDMI 2.0 was that 4K TVs require more bandwidth to see the 4K picture. Since 4K is four times the resolution of 1080p, it required more bandwidth to support the extra data and that is why we have designed these HDMI 2.0 devices. HDMI 2.0, which is backwards compatible with earlier versions of the HDMI specification, significantly increases bandwidth up to 18Gbps and adds key enhancements to support market requirements for enhancing video and audio experience.
The older HDMI 1.4 compliancy supported 4K resolutions but only at 24 or 30 frames per second as well as HDMI 1.4 limits 4K content to 8-bit color. Our new HDMI 2.0 products can handle video up to a 4K at 60 frames per second and up to 18 gigabits per second assuring you of the finest 4K picture you can get. These HDMI 2.0 products are fully backward compatible with all previous HDMI version versions.
HDTV Supply is a leader in supplying 3D equipment for this new, fast growing 3DTV market. Our test lab includes the latest equipment for designing, testing and supporting 3D video equipment. The chips sets we use support the below 3D formats and work with many of our HDMI 1.3 and HDMI 1.4 compliant devices. This device supports these 3D formats:
Side-by-Side 3D Format
Top-and-Bottom 3D Format
Blu-ray 3D Format
We not only test this device with lab equipment we also test many of our 3D devices with 3D products you are likely to use. The products used for the test are:
Sony PS3 with the 3D 3.41 firmware
Samsung model PN50C7000YF 3DTV
Samsung model BD-C6900 3D Blu-ray player FORCED to 1080p
Samsung model SSG-P2100T 3D glasses
DirecTV models HR21-100 and the HR24 high definition receiver.
HDTV Supply's true HDMI 2.0 cables
It works with all HDMI devices including the new 3D units.
The 3D viewing results were awesome in our lab and did not have any picture or audio degradation. The normal and standard (2D) results equally exhibited a superb picture quality.
Q: Does HDMI 2.0 support BT.2020 (rec.2020) colorimetry?
A: Yes. HDMI 2.0 includes support for BT.2020 Colorimetry with 10 or more bits of color depth. Video Formats defined in BT.2020 and supported by the HDMI 2.0 specification are:
2160p, 10/12 bits, 24/25/30Hz, RGB/4:2:2/4:4:4
2160p, 10/12 bits, 50/60Hz, 4:2:0/4:2:2
Ask a Question
Questions & Answers
Ask a question about the 4K 1x8 HDMI 2.0 Splitter or Call 833-WOLFPACK (833-965-3722)
To ensure 3D or 4K content is routed via the splitter, High Speed 4K HDMI cables must be used and any connected non-3D or non-4K compatible display must not have an "active" HDMI output (i.e. powered off or in standby mode). The 4K or 3D source player must not be able to "see" a 2D or non-4K only display connected to the Matrix.