HDTV Supply's WolfPack™ 4K VGA & HDMI Wallplate Transmitter Over HDBaseT
is an HDBaseT Wallplate Transmitter that supports 1 - HDMI input and 1 - VGA plus a 3.5mm audio input. The output is 1 - HDBaseT(RJ45) output that extends those switchable inputs to 330 feet at 1080p and 175 feet at 4K/30. The WolfPack VGA & HDMI Wallplate Transmitter Over HDBaseT also supports switching those sources by a one-key button and a touch switcher. It also has an auto-sense feature. The resolution can up to 4K@30Hz and supports a POE & POC (Power Over Cable) function.
HDTV Supply's WolfPack™ 4K HDMI Wallplate Transmitter uses the latest HDBaseT technology which featuring no compression, no losses and no latency over an HDMI signal transmission via a single UTP or STP CAT5e/6/7 cable. Using this VGA & HDMI Wallplate Transmitter Over HDBaseT with UTP cables allows you to run uncompressed 1080p high-definition HDMI signals upwards to 330 feet.
HDTV Supply's implementation of the HDBaseT technology adds virtually zero latency to the HDMI audio & video signal, less than 7 microseconds (0.000007 sec) over 330 feet of CATx cable. At 100 feet you are talking about 3 microseconds (0.000003 sec). This means for example, in a church or auditorium, the speakers lips are always in synch with the video image on all the TVs & projectors 100's of feet away.NOTE:
This VGA & HDMI Wallplate Transmitter Over HDBaseT is a Transmitter (TX) only and requires an HDBaseT receiving device like our WolfPack HDBaseT Modular HDMI matrix card or displays or projectors that have an HDBaseT input and conform to the specs of the Receiver.
VGA & HDMI Wallplate Transmitter Over HDBaseT Features:
- 1 - VGA plus its 3.5mm audio
- 1 - HDMI
- Supports 1080p and up to 4K30
- Supports HDCP 1.4
- Transmission distance: 330' at 1080p & 175' at 4K30 via Cat5e/Cat6
- Supports POE & POC (Power Over Cable)
- Support one-key touch switching or auto switching
- LED working indicator
- Single gang width
Our VGA & HDMI Wallplate Transmitter transmitts by one single CAT5e/ CAT6/ CAT7 cable and for 1080p it can transmit to a distance of 330 feet and for 4K30Hz (4:2:0) it can go up to 175 feet. The VGA & HDMI Wallplate Transmitter is compatible with all the HDTV resolutions because it supports the HDCP 1.4 protocol.NOTE:
If you have 2 devices that are always ON you'll need to use the buttons to switch inputs. An Apple TV keeps its HDMI port active even in the sleep state so auto-switching may not work with the Apple TV. Manual switching can still be used.
Why not buy our VGA & HDMI Wallplate Transmitter Over HDBaseT today?