This WolfPack™ Rugged HDMI Over Coax Extender extends your HDMI source device to an HDTV display up to 660 feet with a single RG6 coax cable. It not only breaks the limitation of the HDMI cable transmission length but also has more flexibility and convenience using coax cabling in an hot environment.
Both the Rugged HDMI Over Coax Extenders Transmitter and Receiver are equipped with an HDMI connector and is capable of supporting DVI equipment, when used with an HDMI to DVI Adapter, providing greater flexibility and options when integrating several components. This Rugged HDMI Over Coax Extender sends a 1080p FULL HD HDMI signal up to 660 feet over a single coaxial cable without any video loss and time delay...and in hostile environments.
NOTE 1: This Sturdy HDMI Over Coax Extender only supports 480p, 720p or 1080p progressive signals so set your source device to one of those resolutions. These adapters do not work with 480i or 1080i source resolutions or 480i or 1080i displays or any interlaced (i) device or any other resolution like 1280x1024, etc. If you try to use it with those resolutions you will not get a picture!
This WolfPack Rugged HDMI Over Coax Extender includes a SEND unit & its AC adapter & a RECEIVE unit & its AC adapter and all must be used. It cannot work with only one box & needs both boxes & must be used in pairs.
Rugged HDMI Over Coax Extender Applications:
Outdoor pool areas
Open door factories
Outdoor trade shows
Outdoor patios
Installations where coax cables are already installed
The units are not waterproof and must be protected from any water getting on them.
WolfPack Rugged HDMI Over Coax Extender Features:
HDMI Over Coax Extender to 660 Feet For Hostile Environments
Extends a FULL 1080p HD HDMI signal over 660 feet using RG59, RG6, RG7 and RG11 coaxial cables
Wide range 117VAC to 5VDC to 12VDC power supply
Resolutions Supported:
1080p@60Hz
1080p@50Hz
1080p@30Hz
1080p@25Hz
720p@60Hz
720p@50Hz
480p@60Hz
It does not support 1080i, 720i, 480i or any interlaced resolutions
Supports digital video formats in Deep Color Mode at up to 12bits/color
Supports full HDMI audio and video
Easy to install and simple to use
FCC, CE and RoHS Compliant
What this Rugged HDMI Over Coax Extender Can & Cannot Do:
CAN DO:
Convert an HDMI signal (like from a DVD player) to a coax signal AND CONVERT THE COAX SIGNAL BACK TO HDMI.
It will do nothing else.
Think of it as a long coax cable with HDMI connectors on both ends.
Both the Transmitter and Receiver MUST be used.
WHAT IT CANNOT DO:
Convert an HDMI signal to a coax signal to go into the coax input of a TV.
Convert a coax signal from the cable company to an HDMI signal.
Convert a coax signal from an antenna to an HDMI signal.
NOTE 2: This WolfPack Rugged HDMI Over Coax Extender includes a SEND unit and its AC adapter and a RECEIVE unit and its AC adapter and both must be used. It cannot work with only one box and needs both boxes and must be used in pairs. It cannot be used to convert an incoming coax signal to an HDMI signal. In-house and existing passive splitters drop the signal strength in half, or more, so delete all of the splitters and wire this device directly as it won't work with coax splitters. They should NOT be used in conjunction with connector adapters, signal processors, switches or amplifiers between the Source and Display device.
Why not buy this Rugged HDMI Over Coax Extender today?
This Rugged HDMI Over Coax Extender can be used with:
Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Any Sony PSx, HD DVD and Blu-ray DVD players
Any Xbox with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
An Roku with HDMI outputs
An Vudu with HDMI outputs
An APPLE TV with HDMI outputs
Any high definition camcorder with an optional type C to standard HDMI cable
Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
All HDMI 1.3b compliant devices as well as with older 1.0, 1.1, 1.2 and 1.3 versions
Q: Can I use this to convert the coax cable coming out of my wall to HDMI?
A: NO! Think of it as a long HDMI cable. This HDMI Coax Extender includes a SEND unit and a RECEIVE unit and both must be used. It cannot work with only one box and needs both boxes. The HDMI Coax Extender cannot be used to convert an incoming coax signal to an HDMI signal. You need both the transmitter and receiver for proper operation. They must be used in pairs. HDMI signal goes into the transmitter travels over the RG6 cable into the receiver and then connects to HDMI port on the display.
Warranty
Click Here for Product Warranty
Pictures
Ask a Question
Questions & Answers
Ask a question about the Rugged HDMI Over Coax Extender or Call 833-WOLFPACK (833-965-3722)
Government
This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.
The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.
If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.
Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:
DUNS: 801957023
TIN: 260452583
CAGE: 4TBM6
Their SEWP Federal Contracts are:
SEWP Contract Number: NNG15SD38B
Group: Group B_SDVOSB
NAICS: 541519
and
SEWP Contract Number: NNG15SD88B
Group: Group C
NAICS: 541519
The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.
For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).
Catalog
HDTV Supply WolfPack Product Catalog (2020)
Rugged HDMI Over Coax Extender
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below