NTI ST-C6DVI-IR-R-300 DVI Extender with IR via One CAT5/6/7

NTI

$225.00
Part Number:
ST-C6DVI-IR-R-300
UPC:
796168576241
Availability:
Contact us for availability
1:
Transmits all signals over one CAT5/6/7 cable
2:
Full IR control of DVI source from remote HDTV using existing source remote control
3:
Supports the DDC2B protocol
4:
Free 15-Day Trial (See below FAQ)
5:
2-Year NTI Warranty
ADD OPTIONS:
NTI ST-C6DVI-IR-R-300 DVI Extender with IR via One CAT5/6/7

NTI ST-C6DVI-IR-R-300 DVI Extender with IR via One CAT5/6/7
transmits digital DVI video and IR signal up to 300 feet away from a DVI source over a single CAT5/6/7 cable. Each video extender consists of a local unit that connects to a single link digital DVI source and IR emitter, and a remote unit that connects to a DVI display and IR receiver.

NOTE:
This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722)
right now to discuss your needs.

NTI ST-C6DVI-IR-R-300 DVI Extender with IR via One CAT5/6/7 Features:

  • Transmits all signals over one CAT5/6/7 cable.
  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
    • Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
  • Full IR control of DVI source from remote HDTV using existing source remote control.
  • HDCP compliant.
  • Supports the DDC2B protocol.
  • High quality, rugged steel construction with durable powder coat finish.
  • Only one power supply is necessary to power both the local and remote units.

Why not buy this NTI ST-C6DVI-IR-R-300 DVI Extender with IR via One CAT5/6/7 today?

NTI ST-C6DVI-IR-R-300 DVI Extender with IR via One CAT5/6/7 Specification:

Local Unit
  • Compatible with a computer or HDTV video source with DVI output.
  • One female DVI-I connector.
    • Signal type: single link digital DVI.
  • IR extension support: one female 3.5 mm port for IR emitter.
  • One female RJ45 port for sending/receiving high definition video, IR and DDC signals.
  • Latency: 40 ns
  • Jitter: 1.230 ns
Remote Unit
  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
  • One female DVI-I connector.
    • Signal type: single link digital DVI.
  • IR extension support: one female 3.5 mm port for IR receiver.
  • One female RJ45 port for sending/receiving high definition video, IR and DDC signals.
  • Auto equalization for different lengths of CAT5/6/7 cable.
Dimensions
  • WxDxH: 3.09x3.49x1.08 in (78x89x27 mm)
Power
  • Powered from a single power supply attached to either the local or remote unit.
  • Local or remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapter included.)
  • Power consumption: 10 W.
  • Heat dissipation: 34 Btu/h.
Environmental
  • Operating temperature: 32 to 122˚F (0 to 50˚C).
  • Storage temperature: -20 to 140˚F (-30 to 60˚C).
  • Operating/storage relative humidity: 17 to 90% non-condensing RH
Regulatory Approvals
  • CE, RoHS
Cables
  • Local and remote unit: 110 to 220 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapters included.)
  • Power Consumption: 10 W (each - local and remote unit)
  • Use the PWR-48V-9V0-6A or PWR-12V-9V0-6A DC-DC power converter to install the local unit in a Telecom environment.
Cables
  • Use DVI-IS-xx-MM cable to connect a DVI source or display.
  • Use DVI-HDMI-xx-MM cable to connect an HDMI source or display.
  • Use DPMM-DVIDF-CBL adapter cable to connect a Mini DisplayPort source or display.
  • Use CAT5/6/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
  • IR transmitter/receiver included.
Regulatory Approvals
  • CE, RoHS
  • TAA compliant
Warranty
  • Two years

Frequently Asked Questions
Reasons To Buy an NTI Product