NTI ST-C6DVI-IR-L-300 DVI Extender with IR via One CAT5/6/7
NTI ST-C6DVI-IR-L-300 DVI Extender with IR via One CAT5/6/7
transmits digital DVI video and IR signal up to 300 feet away from a DVI source over a single CAT5/6/7 cable. Each video extender consists of a local unit that connects to a single link digital DVI source and IR emitter, and a remote unit that connects to a DVI display and IR receiver.
NOTE:
This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722)
right now to discuss your needs.
NTI ST-C6DVI-IR-L-300 DVI Extender with IR via One CAT5/6/7 Features:
- Transmits all signals over one CAT5/6/7 cable.
- Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
- Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
- Full IR control of DVI source from remote HDTV using existing source remote control.
- HDCP compliant.
- Supports the DDC2B protocol.
- High quality, rugged steel construction with durable powder coat finish.
- Only one power supply is necessary to power both the local and remote units.
Why not buy this NTI ST-C6DVI-IR-L-300 DVI Extender with IR via One CAT5/6/7 today?
NTI ST-C6DVI-IR-L-300 DVI Extender with IR via One CAT5/6/7 Specification:
Local Unit- Compatible with a computer or HDTV video source with DVI output.
- One female DVI-I connector.
- Signal type: single link digital DVI.
- IR extension support: one female 3.5 mm port for IR emitter.
- One female RJ45 port for sending/receiving high definition video, IR and DDC signals.
- Latency: 40 ns
- Jitter: 1.230 ns
- Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
- One female DVI-I connector.
- Signal type: single link digital DVI.
- IR extension support: one female 3.5 mm port for IR receiver.
- One female RJ45 port for sending/receiving high definition video, IR and DDC signals.
- Auto equalization for different lengths of CAT5/6/7 cable.
- WxDxH: 3.09x3.49x1.08 in (78x89x27 mm)
- Powered from a single power supply attached to either the local or remote unit.
- Local or remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapter included.)
- Power consumption: 10 W.
- Heat dissipation: 34 Btu/h.
- Operating temperature: 32 to 122˚F (0 to 50˚C).
- Storage temperature: -20 to 140˚F (-30 to 60˚C).
- Operating/storage relative humidity: 17 to 90% non-condensing RH
- CE, RoHS
- Local and remote unit: 110 to 220 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapters included.)
- Power Consumption: 10 W (each - local and remote unit)
- Use the PWR-48V-9V0-6A or PWR-12V-9V0-6A DC-DC power converter to install the local unit in a Telecom environment.
- Use DVI-IS-xx-MM cable to connect a DVI source or display.
- Use DVI-HDMI-xx-MM cable to connect an HDMI source or display.
- Use DPMM-DVIDF-CBL adapter cable to connect a Mini DisplayPort source or display.
- Use CAT5/6/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
- IR transmitter/receiver included.
- CE, RoHS
- TAA compliant
- Two years
Reasons To Buy an NTI Product
