The Kramer KDS-EN5 encodes an HDMI source into an H.264 network stream for distribution over an IP network. It supports video up to 4K30 and stereo audio.
KDS-EN5 Detailed Features
- Turn an HDMI source into an IP stream. The encoder takes HDMI from a source and compresses it for distribution over an IP network. It is the source-side device in a compatible networked video system.
- Work with 4K30 computer and video content. The manufacturer lists support up to 4K30 4:4:4. Match the source format, encoding settings, and display capabilities when planning the required image quality.
- Use standard H.264 video compression. H.264/MPEG-4 AVC and supported stereo audio formats provide a standards-based transport. Compatibility still depends on matching the profiles, transport settings, and stream configuration at both ends.
- Choose unicast or multicast distribution. Selectable streaming arrangements accommodate delivery to a single destination or multiple compatible receivers. Multicast requires appropriate switch configuration, including the specified IGMP support.
- Adjust the network video rate. The published bitrate range is 2–30Mbps with constant or variable bitrate options. Select a setting that balances the content requirements against available network capacity.
- Power from PoE or a local supply. A compatible PoE network switch can power the device, or an appropriate 12V adapter can be used. The external supply is not included according to the listed power specification.
- Connect separate stereo audio equipment. An unbalanced stereo output on a three-pin terminal block provides an analog audio connection. This supports a suitable local audio system in addition to the HDMI path.
- Configure and maintain over the network. Embedded web pages, Protocol 3000, and RS-232 provide control options. Status indicators assist local checks, while supported network tools allow remote configuration and firmware maintenance.
Specifications
| Manufacturer part number | 60-001290 |
|---|---|
| Inputs | 1 HDMI (1.4): on a female HDMI connector |
| Outputs | 1 Unbalanced Stereo Audio: on a 3-pin terminal block connector |
| Ports | 1 Ethernet: on an R-J45 connector 1 RS-232: on a 3-pin terminal block connector |
| Video | Compression Standard: H.264/MPEG-4 AVC Profiles: Base line, Main, High profile Levels: Up to 5.0 Rate Control: CBR,VBR, adjustable GOP size Bit Rates: 2Mbps-30Mbps Encapsulation Format: MPEG-2 transport stream Transmission format: TS over UDP, TS over RTP Input Resolutions: 640x480, 800x600, 1024x768, 1280x800, 1280x1024, 1360x768, 1366x768, 1440x900, 1400x1050, 1600x1200, 1680x1050, 1920x1200, 720x480 (480p), 720x576 (576p), 1280x720 (720p30), 1280x720 (720p50), 1280x720 (720p60), 1920x1080 (1080p24), 1920x1080 (1080p25), 1920x1080 (1080p30), 1920x1080 (1080p50), 1920x1080 (1080p60) , 1920x1200, 3840x2160 (4Kp24), 3840x2160 (4Kp30) Output Resolutions: 640x480, 720x480 (480p), 720x576 (576p), 800x600, 1024x768, 1280x720 (720p50), 1280x720 (720p60), 1280x800, 1280x1024, 1366x768, 1440x900, 1600x1200, 1680x1050, 1920x1080 (1080p24), 1920x1080 (1080p25), 1920x1080 (1080p30), 1920x1080 (1080p50), 1920x1080 (1080p60), 1920x1200, 3840x2160 (4Kp24), 3840x2160 (4Kp30) |
| Audio | Compression Standard: MPEG4 AACLC Channels: 2 channel (stereo), HDMI with stereo LPCM/AAC audio Sample Frequency: 48kHz Bitrate 1.6Mbps (LPCM), ≤240Kbps (AAC) |
| Power | Source: PoE or 12V DC power supply (not included) Consumption: 5.6W |
| Environmental | Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, |
| Conditions | non-condensing Storage Temperature: -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing Humidity: 10% to 90%, non-condensing |
| Product Dimensions | 21.90cm x 13.50cm x 2.50cm (8.62" x 5.31" x 0.98" ) W, D, H |
| Product Weight | 0.8kg (1.7lbs) approx |
| Shipping Dimensions | 35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H |
| Shipping Weight | 1.1kg (2.4lbs) approx |
Technical Questions and Answers
What does the KDS-EN5 do?
The Kramer KDS-EN5 encodes an HDMI source into an H.264 network stream for distribution over an IP network. It supports video up to 4K30 and stereo audio.
What is specified for inputs?
1 HDMI (1.4): on a female HDMI connector
What is specified for outputs?
1 Unbalanced Stereo Audio: on a 3-pin terminal block connector
What is specified for ports?
1 Ethernet: on an R-J45 connector 1 RS-232: on a 3-pin terminal block connector
What is specified for audio?
Compression Standard: MPEG4 AACLC Channels: 2 channel (stereo), HDMI with stereo LPCM/AAC audio Sample Frequency: 48kHz Bitrate 1.6Mbps (LPCM), ≤240Kbps (AAC)
What are the power requirements?
Source: PoE or 12V DC power supply (not included) Consumption: 5.6W
What is specified for conditions?
non-condensing Storage Temperature: -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing Humidity: 10% to 90%, non-condensing
What is specified for product dimensions?
21.90cm x 13.50cm x 2.50cm (8.62" x 5.31" x 0.98" ) W, D, H
Choosing the Right Product
What is the Kramer KDS-EN5 used for?
It is used for network distribution of HDMI video and stereo audio. Encodes an HDMI source into an H.264 network stream for distribution over an IP network. It supports video up to 4K30 and stereo audio.
Who should choose the KDS-EN5?
Choose this model when your project needs network distribution of HDMI video and stereo audio. Compare the model-specific connections and specifications above with the equipment in your system.
What should I check before ordering the KDS-EN5?
Confirm manufacturer part 60-001290, the required connections and the installation requirements. Use the linked documentation to check compatible equipment and required accessories.
