This DVDO H265-4KENC-1 AV over IP H.265/H.264 4K60 Encoder is a 4K60 AV over IP encoder designed to work seamlessly with DVDO-H265-4KDEC-1 and DVDO-H265-4KDEC-MV-1 decoders for high-performance AV over IP distribution.
Powered by advanced H.265 technology, it delivers low-latency video transmission and supports flexible distribution configurations including one-to-one, one-to-many and many-to-many setups as well as advanced display modes such as video wall (only available with the DVDO-H265-4KDEC-1 decoder) and multiview (only available with the DVDO-H265-4KDEC-MV-1 decoder) configurations.
A free control app with real-time video preview, along with front panel buttons, provides intuitive system management for simple deployment and operation. Designed for professional AV integration, DVDO-H265-4KENC-1 also supports PoE, HDMI loop-out as well as IR, RS-232 & I/O control pass-through.
DVDO H265-4KENC-1 AV over IP H.265/H.264 4K60 Encoder Features:
- HDMI 2.0, HDCP 2.2 compliant
- Advanced H.265 technology for high quality and low-latency transmission
- Video resolutions up to 3840x2160@60Hz
- Works seamlessly with DVDO-H265-4KDEC-1 & DVDO-H265-4KDEC-MV-1 decoders
- System supports up to 256 encoders (input sources) & 256 decoders (displays)
- HDMI loop-out
- One-to-one, one-to-many or many-to-many configurations
- Video wall / multi-screen splicing function up to 5x5 (only available with DVDO-H265-4KDEC-1 decoder)
- Multiview function including PiP, PbP, 2x2, 3x3 & custom modes (only available with DVDO-H265-4KDEC-MV-1 decoder)
- Transmission distance up to 120m with Cat6 cables
- PoE (Power over Ethernet)
- Control via free app (iOS or Android) & front panel buttons
- Bi-directional IR, RS-232 & I/O control pass-through & routing
- Firmware upgrade via micro USB port
- Lightning, surge & ESD protection
- Stable 24/7 operation
Why not buy this DVDO H265-4KENC-1 AV over IP H.265/H.264 4K60 Encoder from HDTV Supply today?
DVDO H265-4KENC-1 AV over IP H.265/H.264 4K60 Encoder Specifications:
- General:
- Model: DVDO-H265-4KENC-1
- Type: Encoder
- Technical:
- Compliance: HDMI 2.0 / HDCP 2.2
- Video Resolutions:
- 4096x2160@24/30Hz
- 3840x2160@24/30/50/60Hz
- 1080p@50/60Hz
- 720p@50/60Hz
- 1920x1200@60Hz
- 2560x1440@60Hz
- Bandwidth: 18Gbps
- Transmission Distance:
- CAT6: 120m
- CAT5E: 100m
- Transmission Latency:
- 4K@60Hz: 130~200ms
- 1080p@60Hz: 70~130ms
- Video Network Bandwidth: 1G
- HDMI Audio: LPCM 2.0
- IR Range / Frequency: ≤ 5m / 20K-60KHz
- RS-232 Baud Rate:
- Default: 115200
- Supported: 2400, 4800, 9600, 19200, 38400, 57600, 115200
- ESD Protection: IEC 61000-4-2: ±8kV (Air-Gap Discharge) & ±4kV (Contact Discharge)
- Connections:
- Input Ports:
- 1 x HDMI [Type A, 19-Pin Female]
- 1 x LAN [RJ45 Connector]
- Output Ports:
- 1 x LAN [RJ45 Connector]
- Control Ports:
- 1 x RS-232 [3-Pin 3.5mm Phoenix Connector]
- 1 x IR IN [3.5mm Stereo Mini-Jack]
- 1 x IR OUT [3.5mm Stereo Mini-Jack]
- Input Ports:
- Mechanical:
- Housing: Black Metal Enclosure
- Weight: 523 g / 1.15 lb
- Dimensions (W x D x H): 191 x 96 x 25 mm
- Power Supply: DC 5V/2A (if not using PoE)
- Power Consumption: ≤ 5.5 W
- Operating Temperature: -4 to 140°F / -20 to 60°C
- Storage Temperature: -22 to 158°F / -30 to 70°C
- Relative Humidity: 0 - 90% Non-Condensing
Why not buy this DVDO H265-4KENC-1 AV over IP H.265/H.264 4K60 Encoder from HDTV Supply today?
HDTV Supply partners with DVDO to sell and support all DVDO products
Why not buy this DVDO H265-4KENC-1 AV over IP H.265/H.264 4K60 Encoder from HDTV Supply today?
1.What video resolutions and refresh rates does this encoder support?
A: The encoder supports up to 3840x2160 at 24/30/50/60Hz and 4096x2160 at 24/30Hz, plus listed 1080p and 720p rates.
2.What is the stated network transmission latency for 4K60 and 1080p?
A: The manual lists transmission latency for 4K@60Hz as 130–200 ms and for 1080p@60Hz as 70–130 ms.
3.How far can video be transmitted over Ethernet cables?
A: The product specifies CAT6 up to 120 m and CAT5E up to 100 m for transmission.
4.Does the encoder support PoE power?
A: Yes — the encoder supports Power over Ethernet (PoE).
5.Is there an HDMI loop‑out on the encoder and what is the recommended HDMI cable length?
A: Yes — the encoder includes an HDMI loop-out and HDMI cable length is recommended to be ≤ 5 meters.
6.Which control and management options are available for this encoder?
A: You can control the encoder with the free iMMS app (iOS/Android) or with front panel buttons, and it supports firmware upgrades via Micro USB.
7.Can IR and RS‑232 signals be passed through the encoder?
A: Yes — the encoder supports bi-directional IR pass-through and RS-232 passthrough for control routing.
8.What RS‑232 baud rates are supported for passthrough/control?
A: The encoder's RS-232 supports default 115200 and additional rates of 2400, 4800, 9600, 19200, 38400, and 57600.
9.Can I power the encoder with a DC adapter instead of PoE?
A: Yes — the encoder can be powered via PoE or with an alternative DC 5V/2A adapter if PoE is not used.
10.Does the encoder include protections against ESD, surge and lightning?
A: Yes — the manual and datasheet list ESD protection plus lightning and surge protection features.
