This DVIGear DVI-2807-AOC HyperLight Series Display Port 1.4 Long AOC Cable 7.5M is a new generation of advanced Active Optical Cables (AOC) that employs cutting edge technology to deliver unprecedented resolution, performance and value. HyperLight cables support DisplayPort 1.4 and provide superior features in a compact, lightweight form-factor. They are fully HDCP 1.4 / 2.2 compliant and support signals with aggregate data rates up to 32.4 Gbps. (HBR3). These features enable HyperLight cables to support very high resolution applications at 4K / 60Hz (4:4:4) and 8K / 30Hz (4:4:4) with cable lengths up to 100 meters.
Easily Adaptable — HyperLight cables support both DisplayPort and Mini DisplayPort connections. The cables are terminated with low profile Mini DisplayPort (mDP) connectors that measure less than 8x11 mm. This narrow cross-section makes it very easy to pull these cables through conduit or other tight spaces. An optional Pull Sleeve Kit further simplifies cable pulls. The cables also include two detachable docking connectors that allow them to plug into full-size DisplayPort receptacles. The docking connectors include a locking pin for added security. This functionality enables seamless connections to content servers and use in other high-density applications without any intermediary dongles or adaptors.
Easy to Install, Even in Plenum Spaces — HyperLight cables are plenum rated (UL CMP-OF), compact, lightweight, and highly flexible. Constructed using a hybrid design of 4x GOF (Glass Optical Fiber) and 6x copper wires, they are rugged, yet flexible, with a minimum bend radius of 35 millimeters. This flexibility makes them an ideal solution for cable routing in tight spaces.
Professional Environments — These cables are designed for use in mission-critical applications where image quality and dependability are paramount. HyperLight cables are engineered from the ground up for superior performance and unfailing reliability with MTBF >150,000 hours. Video signals are transmitted over four optical fibers, which make them immune to interference from environmental noise. The optical transmission path provides a very low RFI / EMI profile, which allows the cables to be installed in sensitive applications with strict security requirements. The cables draw power from the connected DisplayPort source, eliminating the need for an external power supply. HyperLight AOC cables are ideally suited for applications that require ultra-high resolution DisplayPort signals to be extended over long cable runs with flawless image quality.
DVIGear DVI-2807-AOC HyperLight Series Display Port 1.4 Long AOC Cable 7.5M Features:
- Lightweight, compact, flexible, plenum-rated Active Optical Cables (AOC)
- Low RFI / EMI profile for sensitive applications
- Supports DisplayPort 1.4 HBR3, HDCP 1.4 / 2.2
- Supports data rates up to 8.1 Gbps / lane or 32.4 Gbps total
- Extends resolutions up to 8K / 30 Hz up to 328 ft. (100 meters)
- Supports direct connection of Mini DisplayPort products
- Cables utilize low-profile Mini DisplayPort connectors with a small X-Y profile for installation in tight spaces
- Detachable full-size DisplayPort docking connectors can be secured with locking pin
- Ultra-low Power Design uses power from the DisplayPort source; no power adapter needed
- Supports bidirectional communications over AUX channel for EDID, HDCP, Link Training, etc.
Why not buy this DVIGear DVI-2807-AOC HyperLight Series Display Port 1.4 Long AOC Cable 7.5M today?
DVIGear DVI-2807-AOC HyperLight Series Display Port 1.4 Long AOC Cable 7.5M Specifications:
- Standards Compliance: DisplayPort 1.4 / HBR3, HDCP 1.4 / 2.2, UL CMP-OF (File E491769)
- Maximum Video Bit Rate: 8.1 Gbps. on 4x Lanes / 32.4 Gbps. (aggregate)
- Maximum Color Depth: Up to 48-bits per pixel
- Maximum Supported Resolutions:
- 4K: 3840×2160 @ at 120 Hz with 24 bits/pixel RGB color
- 5K: 5120×2880 @ at 60 Hz with 30 bits/pixel RGB color
- 8K: 7680×4320 @ at 30 Hz with 24 bits/pixel RGB color
- Digital Audio Support: Up to 32 channels of inline 24-bit, 1536 kHz uncompressed PCM audio
- DisplayPort Input / DisplayPort Output: Detachable 20-pin DisplayPort Male Connectors with locking latch
- Power: No external power supply is required
- AUX Channel Communications: Supports bidirectional communications for EDID, HDCP, Link Training, etc.
- AUX Channel Data Rate: 1 Mbps
- HDCP Support: HDCP 1.4 and HDCP 2.2
- Optical Technology: 4x Discrete Optical Channels, 10 GHz, 850 nm
- Optical Transmitter: Tx Module: 4x 850 nm Multi-mode VCSELs
- Optical Receiver: Rx Module: 4x GaAs PIN Photo Diodes
- Fiber Cable Type: Hybrid cable with 4x GOF (Glass Optical Fibers) and 6x copper members
- Cable Jacket: Plenum Rated, Black
- Standard Lengths (meters)(1): 3, 5, 7.5, 10, 12.5, 15, 20, 25, 30, 40, 50, 60, 75, 80, 90, 100
- Standard Lengths (feet)(1): 9.8, 16.4, 24.6, 32.8, 41.0, 49.2, 65.6, 82.0, 98.4, 131.2, 164.0, 196.9, 246.1, 262.5, 295.3, 328.1
- Maximum Cable Length: 328 ft. / 100 meters
- Product Weight: Varies with length, please inquire for details
- Maximum Tensile Load: > 250N
- Minimum Bend Radius: 35 mm with no load, 70 mm under load
- Crush Resistance: > 500N
- Cable Connector (L x W x H): Male Mini-DisplayPort: 1.90" x 0.43" x 0.31" (48.2mm x 10.8mm x 7.9mm)
- Cable Outside Diameter (W x H): ? 0.13" (3.4mm)
- Docking Connectors: Female Mini-DisplayPort to full-size Male DisplayPort
- Construction: High-impact plastic enclosures with DisplayPort latch and locking pin
- Dimensions (L x W x H): 2.1" x 0.79" x 0.57" (53.6mm x 20.0mm x 14.4mm)
- Operating Temperature: 32° to +122° F (0° to +50° C)
- Storage Temperature: -4° to +158° F (-20° to +70° C)
- Operating / Storage Humidity: 5% to 85% (non-condensing)
- Power Source: Powered from DisplayPort source device
- Power Consumption: < 0.43 watt typical (130 mA @ 3.3 VDC)
- Fiber Optic Cable: FCC, UL CMP-OF (File E491769), CE, RoHS
- Warranty
- Limited Warranty: 3 Years
- Model Number
- DVI-28xxx-AOC: Cable DisplayPort / mDP 1.4, HyperLight G-AOC ( xxx = length in meters )
- Accessories Included
- DVI-28000-RX: 1 ea. HyperLight Mini-DP-AOC, Passive Docking Connector, Rx
- DVI-28000-TX: 1 ea. HyperLight Mini-DP-AOC, Passive Docking Connector, Tx
- DVI-2500-AOC-PIN: 2 ea. HyperLight HDMI Cable Locking Pin
- DVI-28xxx-AOC-QSG-01: 1 ea. Quick Start Guide
Why not buy this DVIGear DVI-2807-AOC HyperLight Series Display Port 1.4 Long AOC Cable 7.5M today?
DVIGear DVI-2807-AOC User Manual
DVIGear DVI-2807-AOC Specifications
Why not buy this DVIGear DVI-2807-AOC HyperLight Series Display Port 1.4 Long AOC Cable 7.5M today?
1.Does this cable support DisplayPort 1.4?
A: Yes; the DVIGear DVI-2807-AOC supports DisplayPort 1.4 (HBR3).
2.What resolutions and refresh rates does this cable support?
A: The cable supports up to 8K (7680×4320) at 30 Hz and 4K (3840×2160) at 120 Hz under the documented color-depth conditions.
3.Is the cable HDCP compliant?
A: Yes; it is HDCP 1.4 and HDCP 2.2 compliant.
4.What lengths are available for this HyperLight AOC?
A: Standard lengths are available from 3 meters up to 100 meters, including the 7.5 meter length of this SKU.
5.What connectors and accessories are included with the cable?
A: The product includes detachable passive docking connectors (one Rx and one Tx), two HyperLight HDMI cable locking pins, and a quick start guide as listed for the DVI-28xxx-AOC family.
6.Can I run an 8K signal over this cable?
A: Yes; it supports 8K (7680×4320) at 30 Hz with the documented 24-bit/pixel RGB color condition.
7.Do I need an external power adapter for the AOC?
A: No; the AOC draws power from the connected DisplayPort source and does not require an external power supply.
8.Is this cable suitable for installation in plenum spaces and tight conduit runs?
A: Yes; it is plenum-rated, compact, and has a small cross-section for tight spaces, with a minimum bend radius of 35 mm (no load).
