This WolfPack™ 4K/30 Dual HDMI Output Card is a 4K 30 4:2:0 compliant, 1-port output card designed to work with our WolfPack Matrix Switchers. The 4K/30 Dual HDMI Output Card provides UHD resolutions including 4K, 3D and up to 48-bit Deep Color at 1080p/60. The 4K/30 Dual HDMI Output Card is used with the matrix for true plug-and- play cross-point switching from any HDMI input to any combination of HDMI outputs. The card has two HDMI outputs which show the same picture. Think of it as a 1x2 HDMI splitter that is on a card.
We designed this card for installations that are okay with the same picture on two or more screens. The also can be used when expanding a matrix system that does not have many slots available to add additional TVs. Once again, the picture on the output connectors are the same.
It allows one HDMI output to be distributed via a 24AWG 4K HDMI output cable up to 30 feet & 1080p up to 50 feet. By having 1-port slide-in cards the matrix is very reliable as in the unlikely even there is a loss of signal you just replace the card with a spare you have purchased or order another from us. The complete matrix doesn't have to be sent to us for a repair. This 4K/30 Dual HDMI Output Card is used with HDTV Supply's line of 9x9, 18x18 and 36x36 modular matrix switchers that feature one-slot card cages this one-port Dual HDMI Output Card depending upon your needs.
4K/30 Dual HDMI Output Card Features:
Supports two (2) HDMI Outputs w/same picture
Supports 4K UHD resolutions
Supported resolutions: 4Kx2K@30 Hz 4:2:0, 1920x1200, 1080p 4:4:4 & 3D
Fast switching speed
No latency
Controllable via the matrices front panel buttons, RS232, WEB GUI and iOS/Android App
Closed Caption (CC) Pass-through
High bandwidth up to 10.2 Gbps
Built-in HDCP 1.4 internal management
Built-in EDID & DDC management
Supports Lip-Sync pass-through
Supports up to 48-bit Deep Color & x.v color
Supports 7.1 Dolby Digital, True HD and DTS-HD audio
Plug & play
NOTE: Do not combine or use our 1080p based SDI, VGA or DVI cards with this 4K/30 HDMI card & our 4K/30 HDBaseT cards in the same matrix chassis. These 4K cards are designed to work only on 4K/30 based system delivering pure 4K/30 resolutions and cannot be combined with any analog or 1080p card system.
Why not buy this 4K/30 Dual HDMI Output Card today?
Specs
4K/30 Dual HDMI Output Card Specs:
Output: 2 - HDMI 1.4 (Female HDMI); T.M.D.S. 2.9 V/3.3
V and 75 ohm
Output signal: DVI-D full digital or HDMI
Gain: 0 dB
Bandwidth: 6.75 Gbps
Resolution range: Up to 4K/30, 1920 x 1200 or 1080P at 60Hz
3D: Yes
HDCP: 1.4
management
Switching speed: 200ns (Max.)
Max. time-delay: 5ns (plus or minus 1ns)
Crosstalk: <-50 dB at 5MHz
DVI/HDMI standards: DVI 1.1/HDMI 1.4 and supports EDID and DDC
Why not buy this 4K/30 Dual HDMI Output Card today?
When one is designing an HDMI Matrix Switch the most important initial specification is the number of inputs and outputs you will need in your facility. The next, and often forgotten, is how the user wants to control those inputs and outputs. HDTV Supply has your back when you're buying one of our WolfPack Family of Modular Matrix Switchers as we have dozens of way to control the inputs and outputs and are shown at Controlling WolfPack Modular Matrix Systems, as well as below:
HDTV Supply has successfully installed our WolfPack, WolfPackLite and our other HDMI Matrix Switchers in Sports Bars, Restaurants, Bowling Alleys, Fitness Centers, Malls, Places of Worship, Data Centers, Gaming Rooms, Nail Salons, County Clubs, Casinos, Factories, Conference Rooms, Schools, Home Theaters or many other installations requiring HDMI matrix switching. The reason, we are told by the users, is the number of features we offer compared to other companies they looked at.
This card used with our modular HDMI matrix switchers can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.
For experienced AV hardware and software professionals who want to write their own drivers for 3rd party control systems from:
AMX™
Control4™
Creston™
RTI™
DTVGameControl™
Elan g!™
Media Switcher™
OnControls™
Savant™
SimpleControl™
SwitchItUp™
SAVI Control™
URC Control™
...and we have created a simple and very easy to use RS232 script to write your own drivers.
EXAMPLE: If you want to switch input 8 to output 1, 8, 16, the RS232 command would be x1&8&16. and notice the command has a period (.) at the end of the string. The matrix even replies "OK" when the right command is received and shows "ERR" when receiving a wrong command. Here is the RS232 User Manual if you want to write your own drivers.
How to use the info:
END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:
Call us for a quote
Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.
CAVEAT: We are not certified by any of the above 3rd party control systems companies nor have the necessary hardware to verify, troubleshoot and support the 3rd party writing of the code. We do warranty, though, that the RS232 script in the above RS232 Users Manual has and will work to control the matrix directly.
Below is a video of the WolfPack 9x9 card cage model showing the fast switching speed and its features. The larger card cage models will operate exactly the same but will allow more input and output cards.
Why not buy this 4K/30 Dual HDMI Output Card today?
Why not buy this 4K/30 Dual HDMI Output Card today?
Q/A
Q: Do the 4K/30 pass-through cards support 2K/60?
A: We tested the 2048x1080@60Hz and 2560x1440@60hz and both resolution can be supported by the 4K30 cards.
Q: What are the DIP switches on the card to be used for?
A: Those are to set the balance and equalization at the factory and are not to be changed
Q: Do you have any tips in the unlikely event the unit fails?
A: Turn it OFF and then disconnect the matrix from the AC power and all cables. Pull out each board from the rear and push back in. Plug all cables back in and turn it on.
Q: What are the HDCP options?
A: You can choose either to open or close the HDCP on the output card. A receiver that cannot support HDCP can also display the sources with HDCP.
Mix-n-Match combinations:
Non-HDCP source to a HDCP compliant TV
HDCP source to a non-HDCP compliant TV
Q: What is you test procedure?
A: Our testing procedure is:
Assembling: Production line self-testing (Basic Functions)
Initial Testing: Includes every card, control software and front panel front buttons
24 Hours Aging: Gao Sheng Standard Aging Room
Final testing: All Functions
QC final Inspection: Sticker, serial number, etc
Packing: Pack and ship
Why not buy this 4K/30 Dual HDMI Output Card today?
Warranty
HDTV Supply includes a 2 Year WolfPackCare™ Advance Replace Limited Warranty on this card. The warranty states that the card will perform in accordance with the accompanying materials for a period of 2 years from the date of the receipt of the order & that the card will be free from defects in materials & workmanship under normal use.
Slide-in Boards & HDBaseT Extenders: If a board or extender goes bad in the first 2-years & HDTV Supplys Tech Support team verifys the problem after a telephone call, HDTV Supply will send a new or like-new unit within the USA usually within 24-hours by USPS Air Priority at HDTV Supplys expense. We will ask for a credit card for payment in case the bad card is not sent back to us within 5-business days. You will need to provide us the tracking number as we will to you and you will need to pay for the cards return. In order to get a warranty replacement for a defective card HDTV Supplys Support Team will verify the product is eligible for a warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 3 or 5 Year warranty for this card. Please call us for a quote.
Why not buy this 4K/30 Dual HDMI Output Card today?
Pictures
Ask a Question
Questions & Answers
Ask a question about the 4K/30 HDMI Output Card with 2-HDMI Outputs or Call 833-WOLFPACK (833-965-3722)
Government
This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.
The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.
If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.
Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:
DUNS: 801957023
TIN: 260452583
CAGE: 4TBM6
Their SEWP Federal Contracts are:
SEWP Contract Number: NNG15SD38B
Group: Group B_SDVOSB
NAICS: 541519
and
SEWP Contract Number: NNG15SD88B
Group: Group C
NAICS: 541519
The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.
For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).
Catalog
HDTV Supply WolfPack Product Catalog (2020)
Trade In
Trade in your eligible video card for credit toward another video card if you need to upgrade. Just tell us about your video card and based on what you tell us, we will offer you a competitive trade in estimate toward buying another video card. A trade in value is normally US$30 on this card.
You need to buy the new card that you want and we will ship it to you and then you need to send the older card to us. We need to receive your card within 14 days of initiating the trade in, and the condition needs to match what you told us.
If the condition of the video card is different from what you described, we will provide a revised value. It generally it takes a week to look at it. You can either accept or reject it. If you accept it, we will continue with the trade in and either credit to the card you provided on the new card purchase. No matter what, we will send you email updates about the progress of your trade in, so you will know what is happening at every step.
4K/30 HDMI Output Card with 2-HDMI Outputs
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below