This CAD Audio STAGE7 Drum Microphone Pack is an affordable 7-piece drum microphone package well suited for performing, rehearsing, and project recording.
The Stage7 consists of the D10 dynamic kick drum microphone, 3 x D29 tom microphones, a D19 snare drum mic, and 2 x C9 overhead microphones.
All the microphones include mounting hardware and a vinyl carrying case for transport and storage.
CAD Audio STAGE7 Drum Microphone Pack Features:
- 7-Piece Drum Microphone Pack
- D10 Cardioid Dynamic Kick Microphone
- D19 Snare Drum Microphone
- 3 x D29 Tom Microphones
- 2 x C9 Overhead Microphones
- Integrated Clips
- Includes Carrying Case
Why not buy this CAD Audio STAGE7 Drum Microphone Pack form HDTV Supply today?
CAD Audio STAGE7 Drum Microphone Pack Specifications:
- Microphone
- Microphone Type: Instrument-Mount
- Polar Pattern: Cardioid / Supercardioid
- Element Type:
- 2 x Condenser
- 5 x Dynamic
- Sound Field: Mono
- Orientation: End Address
- Controls: None
- Pad: No
- Circuitry: Solid-State
- Performance
- Frequency Response:
- 40 Hz to 13 kHz (Cardioid Condenser)
- 90 Hz to 13 kHz (Cardioid Dynamic)
- 90 Hz to 14 kHz -6 dB (Supercardioid Dynamic)
- 50 Hz to 16 kHz (Cardioid Dynamic)
- Maximum SPL: 140 dB
- Sensitivity:
- 2.2 mV/Pa (C9)
- 2.2 mV/Pa (D29)
- 1.6 mV/Pa (D19)
- 0.45 mV/Pa
- Equivalent Noise Level: 27 dB (A-Weighted, Phantom Power)
- Frequency Response:
- Connectivity
- Analog Output Connector: 7 x XLR 3-Pin Male
- Power
- Power Sources: Phantom Power
- Operating Voltage: 12 to 48 V (Phantom Power)
- Physical
- Mounting Thread Size: 5/8"-27 Female
- Packaging Info
- Package Weight: 4.46 lb
- Box Dimensions (LxWxH): 13.9 x 11.1 x 4.1"
Why not buy this CAD Audio STAGE7 Drum Microphone Pack form HDTV Supply today?
What is the STAGE7 and what is it designed for?
A: The CAD Audio STAGE7 Drum Microphone Pack is a 7-piece drum microphone pack. The product is specified for D10 dynamic kick microphone and is intended to address the audio requirements described for this model.
The product page describes this model specifically around these capabilities, so it should be specified according to the application rather than treated as a generic audio device.
What type of audio device is the STAGE7?
A: The CAD Audio STAGE7 Drum Microphone Pack uses the design described as a 7-piece drum microphone pack. Its product-specific configuration includes three D29 tom microphones, which defines how it captures, transmits, monitors, or routes audio.
This configuration is intended to provide the signal behavior expected from the model in its stated professional audio use.
What are the main audio or pickup characteristics of the STAGE7?
A: The key signal characteristics include D19 snare microphone. These characteristics determine how the product handles the intended sound source or monitoring workflow.
Using the appropriate pickup or signal configuration helps maintain consistent audio capture and makes the product easier to match to the surrounding system.
What frequency or operating range does the STAGE7 support?
A: The operating specification listed for the CAD Audio STAGE7 Drum Microphone Pack includes D10 dynamic kick microphone. Users should follow the stated operating range for the intended system configuration.
Where a wireless frequency band is listed, the system should be operated in accordance with applicable local frequency regulations and the compatible transmitter/receiver configuration.
What controls or signal-management features are provided?
A: The product includes two C9 overhead microphones. These controls or operating features help the user configure the microphone or audio system for the application.
These features allow the user to adapt the unit to the source, room, performance, or installation requirements without changing the basic product architecture.
What connectivity or accessories are included with the STAGE7?
A: The CAD Audio STAGE7 Drum Microphone Pack is supplied with or provides mounting hardware. The exact connection method and included accessories depend on this model configuration.
Using the supplied or specified accessories helps preserve compatibility and ensures the product is connected as intended by the manufacturer.
What applications is the STAGE7 suited for?
A: The CAD Audio STAGE7 Drum Microphone Pack is suited to the applications described for this model, including studio, live sound, or fixed installation. Its design focuses on the requirements identified for this specific product.
The combination of the product construction and stated features makes it appropriate for the professional audio environments identified for the model.
How does the STAGE7 support reliable operation?
A: Reliable operation is supported by features such as three D29 tom microphones. For wireless models, correct frequency coordination and receiver/transmitter setup should be followed; for wired models, appropriate signal and power connections should be used.
Correct setup, suitable cabling, and proper frequency coordination where applicable are important for dependable day-to-day performance.
What should users consider when integrating the STAGE7?
A: When integrating the CAD Audio STAGE7 Drum Microphone Pack, users should match the product pickup pattern, frequency range, connection type, and included accessories to the rest of the audio chain. The listed specifications should be used as the reference for system design.
Before installation, verify the connector type, power requirements, wireless band where applicable, and the receiving equipment input requirements.
What are the key technical features to consider when specifying the STAGE7?
A: Key specification points include D10 dynamic kick microphone, three D29 tom microphones, D19 snare microphone, two C9 overhead microphones. These details are the most relevant when comparing the model with other audio products or selecting it for a particular installation.
Together, these specifications define the intended operating characteristics of the model and provide the technical basis for selecting it for a project.
