This CAD Audio E60 Studio Microphone is versatile, cost effective condenser microphone designed for vocal and instrument capturing in recording applications.
The E60 incorporates an op-amp output stage, much like the output stage found in the Equitek series.
Unlike the Equitek, the E60 is powered by +48V phantom power and does not require a battery to compensate for the power requirements of the op-amp.
The cardioid capsule features a 4-position frequency contour switch with Flat, 40Hz, 80Hz and 120Hz settings.
A 10dB Pad switch maximizes gain when capturing audio at close proximity.
The E60's sonic performance and frequency response make it a solid, cost-effective solution for home and project studios.
CAD Audio E60 Studio Microphone Features:
- OpAmp Output Stage: The E60 utilizes the Equitek OpAmp output stage design without the need for an alkaline battery to compensate for power. The OpAmp results in an significantly lower noise floor and high gain.
- 4-Position Frequency Contour: The 4-position low frequency switch provides Flat, 40Hz, 80Hz and 120Hz settings.
- Pad Switch: A -10dB Pad increases headroom and minimizes distortion and noise caused by transient signal.
- Cardioid Polar Pattern: The cardioid polar pattern is effective in minimizing noise at the off-axis sections of the microphone capsule.
Why not buy this CAD Audio E60 Studio Microphone form HDTV Supply today?
CAD Audio E60 Studio Microphone Specifications:
- Microphone
- Microphone Type: Large Diaphragm
- Polar Pattern: Cardioid
- Element Type: Condenser
- Sound Field: Mono
- Orientation: End Address
- Controls: Low Cut/HPF
- Pad: -10 dB
- Filter & EQ: Low-Cut Filter: 40 Hz / 80 Hz / 120 Hz
- Circuitry: Solid-State
- Performance
- Frequency Response: 30 Hz to 20 kHz
- Maximum SPL: 138 dB (with Pad)
- Dynamic Range: 125 dB
- Connectivity
- Analog Output Connector: 1 x XLR 3-Pin
- Power
- Power Sources: Phantom Power
- Operating Voltage: 24 to 52 V (Phantom Power)
- Physical
- Color: Black
- Dimensions: Ø: 1.95 x L: 4.47" / 49.53 x L: 113.54 mm
- Weight: 9.5 oz / 270 g
- Packaging Info
- Package Weight: 1.2 lb
- Box Dimensions (LxWxH): 7 x 6.5 x 4"
Why not buy this CAD Audio E60 Studio Microphone form HDTV Supply today?
What is the E60 and what is it designed for?
A: The CAD Audio E60 Studio Microphone is a studio condenser microphone. The product is specified for OpAmp output stage and is intended to address the audio requirements described for this model.
The product page describes this model specifically around these capabilities, so it should be specified according to the application rather than treated as a generic audio device.
What type of audio device is the E60?
A: The CAD Audio E60 Studio Microphone uses the design described as a studio condenser microphone. Its product-specific configuration includes 4-position frequency contour, which defines how it captures, transmits, monitors, or routes audio.
This configuration is intended to provide the signal behavior expected from the model in its stated professional audio use.
What are the main audio or pickup characteristics of the E60?
A: The key signal characteristics include pad switch. These characteristics determine how the product handles the intended sound source or monitoring workflow.
Using the appropriate pickup or signal configuration helps maintain consistent audio capture and makes the product easier to match to the surrounding system.
What frequency or operating range does the E60 support?
A: The operating specification listed for the CAD Audio E60 Studio Microphone includes OpAmp output stage. Users should follow the stated operating range for the intended system configuration.
Where a wireless frequency band is listed, the system should be operated in accordance with applicable local frequency regulations and the compatible transmitter/receiver configuration.
What controls or signal-management features are provided?
A: The product includes cardioid polar pattern. These controls or operating features help the user configure the microphone or audio system for the application.
These features allow the user to adapt the unit to the source, room, performance, or installation requirements without changing the basic product architecture.
What connectivity or accessories are included with the E60?
A: The CAD Audio E60 Studio Microphone is supplied with or provides cardioid polar pattern. The exact connection method and included accessories depend on this model configuration.
Using the supplied or specified accessories helps preserve compatibility and ensures the product is connected as intended by the manufacturer.
What applications is the E60 suited for?
A: The CAD Audio E60 Studio Microphone is suited to the applications described for this model, including studio, live sound, or fixed installation. Its design focuses on the requirements identified for this specific product.
The combination of the product construction and stated features makes it appropriate for the professional audio environments identified for the model.
How does the E60 support reliable operation?
A: Reliable operation is supported by features such as 4-position frequency contour. For wireless models, correct frequency coordination and receiver/transmitter setup should be followed; for wired models, appropriate signal and power connections should be used.
Correct setup, suitable cabling, and proper frequency coordination where applicable are important for dependable day-to-day performance.
What should users consider when integrating the E60?
A: When integrating the CAD Audio E60 Studio Microphone, users should match the product pickup pattern, frequency range, connection type, and included accessories to the rest of the audio chain. The listed specifications should be used as the reference for system design.
Before installation, verify the connector type, power requirements, wireless band where applicable, and the receiving equipment input requirements.
What are the key technical features to consider when specifying the E60?
A: Key specification points include OpAmp output stage, 4-position frequency contour, pad switch, cardioid polar pattern. These details are the most relevant when comparing the model with other audio products or selecting it for a particular installation.
Together, these specifications define the intended operating characteristics of the model and provide the technical basis for selecting it for a project.
