This CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone large-diaphragm multipattern condenser microphone provides extremely versatile pickup patterns, fast transient response, and very-low self-noise, rendering it a suitable main mic for vocals, voice-overs, and a variety of acoustic and amplified instruments.
Not only does the mic offer a clean and open sound, but the included shockmount helps to eliminate extraneous vibration noises and the internal pop filter lessens breath and plosive sounds.
Rather than having just a few polar patterns, the polar response of the M179 is continuously variable.
This functionality enables the user to select cardioid, hypercardioid, subcardioid, figure-8, omnidirectional, or in-between patterns; the turn of a dial shifts the balance of directional focus and ambient pickup.
Plus, there are switchable settings to impede distortion on loud sources (via the -20 pad) and control bass buildup (via the 100 Hz high-pass filter) for further optimization of the mic's sound.
The M179 connects to an available XLR mic input that supplies 24 to 52 VDC phantom power.
The CAD M179 combines an advanced head amp design, extremely efficient power circuitry, and a vintage capsule design, resulting in superior transient response, low distortion, low noise, and high output level.
This allows the M179 to have an open and clean sound that can serve virtually any project.
The M179 features the dual-pattern version of the original Equitek e-300 capsule, an externally biased capsule with a gold-sputtered 1.1" diaphragm.
Typical FET (field effect transistor) condenser microphones use discrete designs, which use individual transistors that must be carefully matched for proper characteristics. Even with careful matching, discrete designs are inherently nonlinear. M Series microphones use a different approach.
They use advanced high-speed op-amps (operational amplifiers) rather than discrete FETs. These op-amps are individually laser trimmed for optimum performance and have very-high gain.
This allows a large amount of negative feedback to be used to significantly reduce any non-linearity. Plus, the discrete high-efficiency power supply circuit enables greater dynamic range and lower self-noise.
The pattern control knob on the M179 has a center detented cardioid position. This allows the user to quickly and consistently lock the mic in a "hard" cardioid pattern.
By turning the knob clockwise from the center, the pattern varies continuously from cardioid to subcardioid to omnidirectional.
By turning the knob counterclockwise from the center, the pattern varies continuously from cardioid to hypercardioid to bidirectional (figure-8).
This allows the user to adjust to the optimal pattern needed for almost any recording or live situation.
-20 dB Pad Switch: A -20 dB pad switch provides additional headroom and an SPL handling rating of 143 dB.
This is especially helpful if the microphone is going to be used on percussion or amplified electronic instruments because the high gain and wide bandwidth of the M179 microphone can easily overload the inputs of many professional mixing consoles if adequate precautions are not taken.
A user-switchable high-pass filter eliminates noise and rumble below 100 Hz. The stainless steel internal pop/EMI filter helps reduce breath/plosive noises as well as electromagnetic interference.
Phantom Powered: Being a true condenser microphone, the M179 can run on phantom power between 24 and 52 VDC.
CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone Features:
- Continuously variable pattern with a cardioid center detent
- Large 1.1" dual-diaphragm external bias condenser capsule
- Gold-sputtered diaphragms
- High SPL capability (143 dB SPL with pad)
- Transformerless balanced output circuits
- Non-capacitive pad (-20 dB)
- Gentle high-pass filter (6 dB/octave at 100 Hz)
- Stainless steel internal pop/EMI filter
- Includes vibration-absorbing shockmount
- XLR 3-pin output connector
- Includes hard storage case
Why not buy this CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone form HDTV Supply today?
CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone Specifications:
- Microphone
- Microphone Type: Large Diaphragm
- Polar Pattern: Cardioid / Figure-8 / Hypercardioid / Omnidirectional / Subcardioid/Wide Cardioid
- Element Type: Condenser
- Sound Field: Mono
- Diaphragm: 1.1" / 27.9 mm
- Orientation: Side Address
- Controls: Low Cut/HPF, Pad, Polar Pattern
- Pad: -20 dB
- Filter & EQ: Low-Cut Filter: 100 Hz, 6 dB/Octave
- Circuitry: Solid-State
- Performance
- Frequency Response: 10 Hz to 20 kHz
- Maximum SPL: 143 dB (with Pad)
- Sensitivity: -36 dBV/Pa
- Equivalent Noise Level: 11 dB (A-Weighted)
- Connectivity
- Analog Output Connector: 1 x XLR 3-Pin Male
- Power
- Power Sources: Phantom Power
- Operating Voltage: 24 to 52 V (Phantom Power)
- Physical
- Color: Gray
- Dimensions: Ø: 2.25 x L: 7" / 5.72 x L: 17.8 cm
- Weight: 1.1 lb / 0.5 kg
- Packaging Info
- Package Weight: 4.75 lb
- Box Dimensions (LxWxH): 11.6 x 9.7 x 9.4"
Why not buy this CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone form HDTV Supply today?
What is the M179 and what is it designed for?
A: The CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone is a large-diaphragm multipattern condenser microphone. The product is specified for switchable -20 dB pad and is intended to address the audio requirements described for this model.
The product page describes this model specifically around these capabilities, so it should be specified according to the application rather than treated as a generic audio device.
What type of audio device is the M179?
A: The CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone uses the design described as a large-diaphragm multipattern condenser microphone. Its product-specific configuration includes 100 Hz high-pass filter, which defines how it captures, transmits, monitors, or routes audio.
This configuration is intended to provide the signal behavior expected from the model in its stated professional audio use.
What are the main audio or pickup characteristics of the M179?
A: The key signal characteristics include stainless steel internal pop filter. These characteristics determine how the product handles the intended sound source or monitoring workflow.
Using the appropriate pickup or signal configuration helps maintain consistent audio capture and makes the product easier to match to the surrounding system.
What frequency or operating range does the M179 support?
A: The operating specification listed for the CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone includes 100 Hz high-pass filter. Users should follow the stated operating range for the intended system configuration.
Where a wireless frequency band is listed, the system should be operated in accordance with applicable local frequency regulations and the compatible transmitter/receiver configuration.
What controls or signal-management features are provided?
A: The product includes 3-pin XLR output. These controls or operating features help the user configure the microphone or audio system for the application.
These features allow the user to adapt the unit to the source, room, performance, or installation requirements without changing the basic product architecture.
What connectivity or accessories are included with the M179?
A: The CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone is supplied with or provides versatile pickup patterns. The exact connection method and included accessories depend on this model configuration.
Using the supplied or specified accessories helps preserve compatibility and ensures the product is connected as intended by the manufacturer.
What applications is the M179 suited for?
A: The CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone is suited to the applications described for this model, including studio, live sound, or fixed installation. Its design focuses on the requirements identified for this specific product.
The combination of the product construction and stated features makes it appropriate for the professional audio environments identified for the model.
How does the M179 support reliable operation?
A: Reliable operation is supported by features such as 100 Hz high-pass filter. For wireless models, correct frequency coordination and receiver/transmitter setup should be followed; for wired models, appropriate signal and power connections should be used.
Correct setup, suitable cabling, and proper frequency coordination where applicable are important for dependable day-to-day performance.
What should users consider when integrating the M179?
A: When integrating the CAD Audio M179 Large-Diaphragm Multipattern Condenser Microphone, users should match the product pickup pattern, frequency range, connection type, and included accessories to the rest of the audio chain. The listed specifications should be used as the reference for system design.
Before installation, verify the connector type, power requirements, wireless band where applicable, and the receiving equipment input requirements.
What are the key technical features to consider when specifying the M179?
A: Key specification points include switchable -20 dB pad, 100 Hz high-pass filter, stainless steel internal pop filter, 3-pin XLR output. These details are the most relevant when comparing the model with other audio products or selecting it for a particular installation.
Together, these specifications define the intended operating characteristics of the model and provide the technical basis for selecting it for a project.
