This Atlona AT-OME-PS62 6×2 Matrix Presentation Switcher with USB Hub is a 6×2 matrix presentation switcher with USB-C, HDBaseT, and HDMI inputs, plus HDMI and HDBaseT outputs. Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-PS62 features HDBaseT extension for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters). The HDMI and USB-C inputs support video up to UHD/60 4:4:4.

The OME-PS62 is HDCP 2.2 compliant and features 4K/60 4:4:4 upscaling and downscaling for the HDMI output. Integrated USB extension addresses the challenge of connecting between USB devices at remote locations, and is ideal for software video conferencing and touch or interactive displays. The OME-PS62 includes USB 3.0 and USB-C interfaces for three host PCs, plus two peripheral devices such as a camera, microphone, speakerphone, or keyboard and mouse. This versatile matrix presentation switcher is ideal for a wide range of 4K presentation applications with Omega Series transmitters and receivers.

Atlona AT-OME-PS62 6×2 Matrix Presentation Switcher with USB Hub Feature:

• 6×2 AV matrix switcher with USB-C, HDBaseT, and HDMI inputs
  • Features two HDBaseT and three HDMI inputs, plus a USB-C input
  • Delivers flexible BYOD capability, as well as integration versatility for local and remote AV sources
• USB-C input for AV, USB data, and device charging (up to 60 watts)
  • Provides compatibility with laptops and tablets with USB-C ports supporting AV output
  • Allows clutter-free, single cable connectivity to a PC for video conferencing and collaboration
• HDBaseT and HDMI outputs with selectable AV switching modes
  • Selectable switching modes available with mirrored or matrixed outputs
  • Enables simple configuration and effortless user operation, tailored to the specific AV application
• Video, audio, power, and data over category cable utilizing HDBaseT technology
  • Transmits and receives 4K/UHD video up to 330 feet (100 meters) with CAT6/6a/7 cable, or up to 295 feet (90 meters) using CAT5e cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation
• USB 2.0 interfacing and extension* up to 330 feet (100 meters)
  • Local USB 3.0** hub with two USB type B interfaces for connection to a host PC, plus two USB type A ports for a peripheral device such as a microphone, speakerphone, or a keyboard and mouse
  • USB-C input is also available for data connection to a host PC
  • Supports USB 2.0 devices, USB 3.0 devices compatible with USB 2.0, and legacy USB 1.x peripherals
  • Provides an ideal USB integration solution for software video conferencing and other applications
  • * A maximum 120 Mbps data rate is supported, due to specific USB bandwidth limitations over HDBaseT.
  • ** Most USB 3.0 devices, such as cameras, are backward-compatible with USB 2.0 for HDBaseT extension.
• 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling on local ports (HDMI and USB-C), plus support for HDR formats
  • HDBaseT output supports 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
  • HDMI and USB-C inputs, and HDMI output are compatible with 4K HDR10 @ 60 Hz and Dolby Vision™ @ 60 Hz, as well as HLG (Hybrid Log-Gamma) for 60p HDR broadcast services
• 4K/UHD downscaling and upscaling for HDMI output
  • Preserves color and spatial detail when down-converting 4K content to 1080p or vice versa
  • Ideal for presentation applications where content is to be viewed on 4K and HD displays
  • Also ideal for downscaling to 1080p for hardware video conferencing codecs and lecture capture systems
• Aspect ratio control (HDMI output)
  • The aspect ratio of the video can be adjusted to a desired presentation viewing format
  • Aspect ratio options include Fill (content fills the display), and Follow (keep original aspect ratio)
• Internal video test patterns for setup, calibration, and troubleshooting (HDMI output)
  • Includes color bars, crosshatch, and grayscale
  • Test patterns facilitate setting up displays, validating system performance, and diagnosing image display or signal connectivity issues
• Remotely powers transmitters and receivers over HDBaseT
  • Supplies industry standard IEEE 802.3af PoE over HDBaseT to Omega Series and other compatible transmitters and receivers
  • Allows convenient endpoint installation at remote locations without the need for local AC power
• Automatic display control*
  • Automatically changes display power state based on active or standby mode of the switcher. Control signals to display are transmitted via IP, RS-232, or CEC.
  • CEC enables control of consumer displays (as supported by the display manufacturer)
  • Includes an adjustable lamp cooldown mode to avoid prematurely powering up a projector after shutdown
  • Enables effortless, automated system operation without the need for an external control system
  • * Available when Matrix Mode is disabled (HDMI and HDBaseT outputs are mirrored).
• Automatic input selection* using hot plug detect and video detection technology
  • Selects active input when sources are connected or if there is a change in source power status
  • Enables simplified, automatic system operation without user intervention
  • * Available when Matrix Mode is disabled (HDMI and HDBaseT outputs are mirrored).
• Comprehensive audio integration features
  • Audio embedding and de-embedding
  • Microphone/line level input with 48 volt phantom power and automatic ducking
  • Volume, mute, and five-band EQ for each output
  • Integrated audio processing and optimization features without the need for additional equipment
• Audio output matrix mixer
  • Mix de-embedded audio along with analog mic/line level inputs, and route to analog outputs or embedded video outputs
  • Eliminates the need for an external audio routing system
• Multi-channel audio compliant
  • Passes through multi-channel audio formats from the HDMI or HDBaseT inputs
  • Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS® Digital Surround™, DTS-HD Master Audio™, and DTS:X®
• EDID management
  • Manages EDID communications with the source through a display’s EDID or internally stored EDID
  • Ensures desired audio formats and video resolutions are provided to the AV system
• HDCP 2.2 management
  • Automatically reports HDCP compliance status to the source based on the sink device
  • HDCP compliance can also be disengaged through Velocity Device Manager or a control system
  • Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems; protected content is not transmitted
  • Displays a green splash screen as visual confirmation that protected content is being blocked from transmission to a non-compliant display
• Integrated HDBaseT link testing and status monitoring
  • Tests integrity of the HDBaseT cable link between each input or output and the corresponding transmitter or receiver
  • Web GUI provides real-time link status
  • Quick, easy verification or troubleshooting of RJ-45 termination or twisted pair cable quality
• Intuitive GUI-based configuration using integrated web server
  • Offers menu-based configuration of device settings including network access, input switching, I/O routing for video and audio, signal processing, display control, HDCP and EDID management, and more
  • Allows fast configuration of internal product settings and troubleshooting from a mobile device or PC in the field
• TCP/IP and RS-232 control
  • Flexible control options for compatibility with the Atlona Velocity™ control system, as well as other third-party control systems
  • Reduces integration time and costs
• IP to RS-232 translation
  • Converts TCP/IP commands to RS-232 commands for output to external devices over HDBaseT
  • Enables single IP connection to control processor to control both IP and RS-232 connected devices at remote endpoints
• Easy to configure and manage with Velocity Device Manager
  • Centralized, network-based configuration and management of Atlona IP-controllable products and systems
  • Manage configuration and firmware updates for AV devices spanning a facility, building, enterprise, or residence
  • Available as a part of Velocity control systems or as a free virtual machine software download
• Field-updatable firmware
  • Device can be updated in the field via the web GUI or Velocity Device Manager
• Front panel button controls and LCD menu display
  • Matrix switcher can conveniently be controlled, configured, and monitored from the front panel
  • Provides easy setup, user operation, and troubleshooting
• Rack mountable 1U, full-rack width enclosure
  • Installs easily in rack mounted systems with included 19″ rack mount brackets
  • Reduces installation time and cost
• Included accessories
  • Installation guide, rack mounting hardware, and 2 meter (6.5 foot), USB-C male-to-male cable (USB 3.1 Gen 1)

Why not buy this Atlona AT-OME-PS62 6×2 Matrix Presentation Switcher with USB Hub from HDTV Supply today?