The Ashton Bentley Videobar and Camera Bracket Kit for 43, 55-65 and 75 Floor-to-Wall Chassis is a mounting bracket kit that holds a videobar or camera above the display on an Ashton Bentley Floor-to-Wall chassis. It is a bracket only, not a camera or videobar, and Ashton Bentley's assembly guide calls it Kit VM1.
Part 900-00855 is the bracket Ashton Bentley lists for the majority of videobars and cameras on the 43, 55-65, and 75 Floor-to-Wall Chassis. It can be built in videobar mode or PTZ mode, and the bracket can be fixed vertically or horizontally.
Ashton Bentley publishes a Mount matrix for choosing the right kit, so check your exact videobar or camera before ordering. Camera fixings come with the camera, and the videobar or camera itself is sold separately.
Ashton Bentley Videobar and Camera Bracket Kit Features
- Made for the Floor-to-Wall chassis. Ashton Bentley's assembly guide lists this VM1 kit for the majority of videobars and cameras on its 43, 55-65, and 75 Floor-to-Wall Chassis. It is a bracket only, so you supply the videobar or camera and mount it above the display.
- Two mounting modes. The guide covers a videobar mode assembly and a PTZ mode assembly, and the kit drawing shows a slotted videobar mounting plate and a PTZ camera platform. One kit can therefore suit a videobar room or a PTZ camera room.
- Vertical or horizontal fixing. Depending on the fixing points of the videobar or camera, the guide says the bracket that holds it can be fixed vertically or horizontally. That flexibility helps with devices whose mounting holes sit in different positions, though you should confirm fit first.
- Height adjustment for PTZ cameras. The PTZ mode assembly includes a height adjustment step, and the kit drawing shows two L-shaped uprights with feet marked 204 mm. Use it to set the camera at a sensible height above the display, within the limits the guide shows.
- Hand-tightened AB knobs. The kit drawing shows 4 AB knobs and 2 thumb screws. Ashton Bentley says all supplied AB knobs are designed to be fully screwed up and tightened by hand, so assembly needs no special tools, but you should check each tightened fixing is secure.
- Chosen from the Mount matrix. Ashton Bentley publishes a Mount matrix on its resources page for choosing the correct kit for your videobar or camera, and its support team can help. The kit chart shows 55" videobar and 65" PTZ display compatibility, so check before you buy.
Where the Videobar and Camera Bracket Kit Fits
Boardrooms: Mount a videobar or camera above the display on a Floor-to-Wall chassis for a clean video conferencing setup.
Huddle spaces: Pair the bracket with a 43-inch chassis so a compact room has its conferencing device fixed above the screen.
Video conferencing rooms: Use the PTZ mode to hold a camera above a 55-65 or 75 chassis display.
Integrator projects: Specify the kit alongside an Ashton Bentley chassis so the camera or videobar position is planned from the start.
Why not buy this Ashton Bentley Videobar Camera Bracket Kit today?
Ashton Bentley Videobar and Camera Bracket Kit Specifications
- Model: 900-00855
- Product type: Videobar and camera bracket kit (Kit VM1 in Ashton Bentley's assembly guide)
- Fits: Ashton Bentley 43, 55-65, and 75 Floor-to-Wall Chassis (camera above position)
- Mounting modes: Videobar mode and PTZ mode, with height adjustment in PTZ mode
- Orientation: Bracket can be fixed vertically or horizontally, depending on the device's fixing points
- Kit chart: Videobar display compatibility 55 in; PTZ display compatibility 65 in
- Upright height marking: 204 mm (per the kit drawing)
- Fixings: AB knobs, tightened by hand; camera fixings come with the camera
- Finish: Black finish (as shown in Ashton Bentley render)
- UPC/EAN: 7291063104368
- Warranty: 3 years
- Package: 68 x 19 x 13 cm (26.8 x 7.5 x 5.1 in)
- Weight: 2 kg (4.4 lb), package gross weight
What's in the Box
- 1 x Ashton Bentley videobar and camera bracket kit (per the Ashton Bentley VM1 kit drawing: slotted videobar mounting plate, 2 L-shaped uprights with feet, PTZ camera platform, 4 AB knobs, 2 thumb screws)
Why not buy this Ashton Bentley Videobar Camera Bracket Kit today?
Need a manual now? Call 833-WOLFPACK (833-965-3722) and we will email it to you.
VMK Video Bar Camera Mount Kits Assembly Guide (PDF)
Display Mount Chassis Overview 2026 (PDF)
Why not buy this Ashton Bentley Videobar Camera Bracket Kit today?
What is the Ashton Bentley Videobar and Camera Bracket Kit?
It is a mounting bracket kit that holds a videobar or camera on an Ashton Bentley Floor-to-Wall display mount chassis. It is not a camera or a videobar. Ashton Bentley's assembly guide calls this kit VM1.
Which chassis does part number 900-00855 fit?
It fits the 43, 55-65, and 75 Floor-to-Wall Chassis. Ashton Bentley's assembly guide lists Kit VM1 for the majority of videobars and cameras on those chassis.
Is 900-00855 the same as Kit VM1?
Yes, based on the sources. The price list calls it Chassis Videobar/Camera Bracket 1, and Kramer's collaboration packages list Videobar / Camera bracket 1 with the same chassis. Ashton Bentley's guide names that kit VM1.
Will it fit my videobar or camera?
No guarantee. Ashton Bentley says to consult its Mount matrix on the resources page, or contact support@ashtonbentley.com, to choose the correct mount. Call 833-WOLFPACK (833-965-3722) with your videobar or camera model.
Can it hold both a videobar and a PTZ camera?
Yes. The guide covers a videobar mode assembly and a PTZ mode assembly with height adjustment. The kit chart shows 55" videobar display compatibility and 65" PTZ display compatibility.
Does it come with the screws for my camera?
No. The guide says to use the fixings supplied with the camera when installing it. The kit drawing shows 4 AB knobs and 2 thumb screws for assembling the bracket itself.
Do I need tools to tighten it?
No, not for the AB knobs. The guide says all supplied AB knobs are designed to be fully screwed up and tightened by hand, and some must be checked for a secure fixing.
Does the kit include a videobar or camera?
No. This listing is for the bracket kit only. You supply the videobar or camera, which must be bought separately from its maker.
Is this bracket Cisco certified?
No source says so. Ashton Bentley states that its Camera Above chassis are certified by Cisco, but that does not cover this bracket, so check with Ashton Bentley if certification matters for your project.
Does the bracket have a warranty?
Yes. Ashton Bentley's warranty agreement gives 3 years of standard cover. Call 833-WOLFPACK (833-965-3722) for terms or help with a claim.
Why not buy this Ashton Bentley Videobar Camera Bracket Kit today?
HDTV Supply supplies videobar and camera mounting brackets for boardrooms, conference rooms, huddle spaces, training rooms, and video conferencing spaces.
This bracket is for the Ashton Bentley 43, 55-65, and 75 Floor-to-Wall Chassis. Ashton Bentley says videobars and cameras from most leading video conferencing manufacturers can be mounted, but fit depends on each device's fixing points, so check the Mount matrix.
Why not buy this Ashton Bentley Videobar Camera Bracket Kit today?
This Ashton Bentley Videobar Camera Bracket Kit includes a 3-year manufacturer warranty. Questions? Call 833-WOLFPACK (833-965-3722).
