The BUNDLED 8x32 Component Matrix Switcher Set
is made up of a true 8x8 Component Video Matrix Switch with 8 - separate 1X4 component video splitters giving you 16 outputs. Each of the 8 - matrix outputs will go in to each 1X4 splitter with all four (4) splitter outputs having the same picture
. The component matrix switch design bundle is for applications that that can't afford a true $4,000 8X32 component matrix switch. The combo is for video only applications. Call us if you need audio too.Again, each of the 8-matrix outputs will go in to each 1X4 splitter with all 4-splitter outputs having the same picture. This means if you change TV channels it will change the picture on 4-TVs. If you do not want that see our true 8x32 Component Video Matrix Switch
The 8x8 Component Matrix Switcher bundle is made up of 1 - 8X8 matrix and the below 8 - 1X4 component video splitters:
8x32Component Matrix Switcher Features:
- Switch Component HDTV Video between multiple sources and displays
- Supported HDTV high definition resolutions 408p, 576i/p, 720p, 1080i/1080p
- IR Extender Remote port to extend the IR up to 1,000 feet (300M)
- Compatible with all Component Video devices, Plasma TV display and HDTV
- RS232 serial interface using simple ASCII commands
- RS232 Driver compatible with all Windows operating systems
- Various User Interface controls:
‧Included Windows based control software for Desktop or NB control by RS232
‧Manual controlled by Front Panel buttons
‧IR remote control
- Desktop or rack mount 19 inch 1RU Rack mount bracket included)
- World Wide Power supply DC12Volt, Universal Type Switch 100~230VAC,
- Video Bandwidth of 325Mhz per channel
Optionally you can connect your 32 displays with the above component to CAT5 balun sets and have an pseudo 8X32 component matrix switcher over CAT5 for <$2,000 and thousands less than our competitors!
The 8 - 1X4 Component Video Distribution Amp Splitters
are very wide band analog Distribution Amplifiers (DA) capable of buffering & splitting any nominal 1 to 2 Volt (peak to peak) signal that terminates into the appropriate 75 ohms.
8 - 1X4 Component Video Distribution Amp Splitters Feature
- RGB / Y-Pb-Pr / component Distribution Amplifier.
- Split any component video signal into 4 outputs without degradation.
- Each output has its own High-Current Cable Driver.
- High current output IC's drive very long cables (> 100 feet) easily. No interaction with other outputs.
- Supports resolutions of 480i, 480p, 720p, 1080i and 1080p.
- All Connectors are Gold Plated RCA.
- Power Supply (12VDC) Included.
- DESIGNED, MADE and SUPPORTED IN THE USA!!!
- The Sync is on green which is standard for Component Video, the R-Y and B-Y doesn't have any sync
- This unit won't add the sync as whatever you put in, you'll get multiple outs.
- 1X4 splitter (above picture) dimensions: 3" X 4" X 3"
Why not buy this 8x32 Component Video Matrix Switch today?