4K 30 Hz 16x32 HDMI Matrix Switch with 32-Separate HDMI to CAT6 Baluns and WEB GUI Control

WolfPackSilver

$4,450.00
Part Number:
HDTV4K3016x32CAT6
UPC:
793132851038
Availability:
Out of Stock
1:
In Stock
2:
True 16x32 HDMI Matrix Switch
4:
4K 30 Hz, HDCP1.4 & HDMI1.4 Compliant
5:
WEB GUI, IR Remote & Front Control
6:
RS232 and PC Software Control
7:
Has 32-Separate HDMI CAT6 Extenders
8:
19" Rack Mountable
9:
Free One Way Control4 Drivers
10:
Tablet, Phone & Laptop Not Included
ADD OPTIONS:

Out of stock

WolfPack HDMI Switcher

HDTV Supplys WolfPackSilver 4K 30 Hz 16x32 HDMI Matrix HDMI Switch w/32-Separate HDMI Baluns switches both HDMI audio and HDMI video signals. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination.

This WolfPackSilver 16x32 HDMI Matrix Switch with separate and bundled 32-HDMI Baluns is designed to allow the switching and distribution of 16 HDMI inputs to 32 HDMI outputs. Our 16x32 HDMI Matrix Switch w/32-HDMI Baluns is a top-of-the-line digital matrix switcher made for the demands of today's HDMI (High-Definition Multimedia Interface) routing. Created to route your system's HDMI signals to go to 32 outputs from 16 inputs, the 16x32 HDMI Matrix Switch w/32-HDMI Baluns delivers high performance.

Control of the 16x32 HDMI Matrix Switch is via (1) IR Remote Control, (2) RS232, (3) PC Software, (4) front buttons, & (5) a WEB GUI for any Internet browser.

NOTE: We recommend using the WEB GUI on a tablet, versus a phone, due to increased viewing space. Also, this HDMI Matrix Switch was designed to work with our optional $75 HDMI to CAT6 extenders, as it only supports up to 25' 24AWG HDMI output lengths.

The WolfPackSilver 16x32 HDMI Matrix HDMI Switch 16 - HDMI input connectors and 32 - HDMI output connectors. Shown above is a picture for this 16x32 HDMI Matrix Switch w/32-separate (TX & RX) HDMI Baluns.

The HDMI Baluns that come with this matrix is based upon the HDMI protocol and can transmit an uncompressed HDMI video & audio signal via a single CAT6/7 cable up to 150 feet depending upon the resolution. The video & audio won't have any latency & the audio & video will always be in synch. The HDMI Baluns have the Power Over Ethernet (POE) design, requiring only 1-AC adapter on the Transmitter.

16x32 HDMI Matrix Switch with 32-Separate HDMI to CAT6 Baluns Features:

  • 4K 30 Hz Switching of up to 16 HDMI sources to 32 displays
  • HDCP and HDMI backwards compatible
  • LCD front panel for status
  • Supports High Speed HDMI 1.4 Specifications
  • Supports full 4K 30 Hz
  • Supports DDC transmission
  • Supports Dolby Digital-True HD and DTS-HD

The WolfPackSilver 16x32 HDMI Matrix Switch w/32-Separate HDMI Baluns provides full HDCP internal management for today's integration in commercial A/V market, ensuring HDCP key authentication and administering the handshake internally. Our WolfPackSilver 16x32 HDMI Matrix Switch w/32-HDMI CAT6 Extenders comes with a full HDCP (High-bandwidth Digital Content Protection) internal management system that will eradicate any interception of your digital data.

Streaming between the source and display units is easily controlled through our HDMI 16x32 Matrix interface. HDCP key authentication will no longer be an issue when using our switcher. Control for our unit is varied and easily accessible.

Why not buy this 16x32 HDMI Matrix Switch with 32-Separate HDMI to CAT6 Baluns today?

Read More

16x32 HDMI Matrix Switch with 32-Separate HDMI to CAT6 Baluns Specs:

  • Input Connector: HDMI A female; T.M.D.S. 2.9V/3.3V, 75 ohms
  • Video Output: HDMI A female; T.M.D.S. 2.9V/3.3V; 75 ohms
  • Gain: 0 dB
  • Resolution: Up to 4K 30 Hz
  • Control Options: Buttons, IR remote & RS232 (9-pin female D connector)
  • A WEB GUI for any Internet browser
  • Worldwide Power Supply: 100VAC ~ 240VAC, 50/60Hz; 50W
  • Temperature: -10 ~ 50 degrees C
  • Working Humidity: 10 ~ 90 degrees
  • Regulation: CE, FCC and CCC

16x32 HDMI Matrix Switch with 32-Separate HDMI to CAT6 Baluns Specs:

  • Gain: 0 dB
  • Video Signal: HDMI (or DVI-D)
  • Resolution Range: Up to 4K 30 Hz 4:4:4 chroma

16x32 HDMI Matrix Switch with 32-Separate HDMI to CAT6 Baluns:

  • Inputs: 16 HDMI
  • Input Connector: HDMI
  • Input Level: T.M.D.S. 2.9V/3.3V
  • Input Impedance: 75 ohms

16x32 HDMI Matrix Switch with 32-Separate HDMI to CAT6 Baluns:

  • Outputs: 32 HDMI
  • Output Connector: HDMI
  • Output Level T.M.D.S. 2.9V/3.3V
  • Output Impedance: 75 ohms

Other 4K 30 Hz 16x32 HDMI Matrix Switch w/32-Separate HDMI Baluns Specs:

  • Input cable distance: ~25 feet AWG24 HDMI 1.4 high speed cable
  • Output cable distance: ~10 feet AWG24 HDMI 1.4 high speed cable to the HDMI Transmitter
  • HDCP Management: Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.4 standards. The built-in HDCP management technology can analyze HDCP key authentication and realize the handshake internally.
  • Serial Control Port: RS-232, 9-pin female D connector with a pin configuration of 2 = TX, 3 = RX, 5 = GND
  • IR Remote: Yes
  • Front Panel Control: Buttons
  • A WEB GUI for any Internet browser.

Why not buy this 16x32 HDMI Matrix Switch with 32-Separate HDMI to CAT6 Baluns today?

HDTV Supply's WolfPackSilver Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT, and we will send you a quotation based upon your needs within an hour.

If it doesn't meet your needs, just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com

Q: What is the IR frequency?
A:
38KHz

Q: Do you have a WEB GUI for the matrix?
A:
Yes.

Why not buy this 16x32 HDMI Matrix Switch with 32-Separate HDMI to CAT6 Baluns today?