Zenty ZT-339 USB 3.2 / 3.0 Extender over HDBaseT 3.0

Zenty

Zenty ZT-339 USB 3.2 / 3.0 Extender over HDBaseT 3.0
$560.00

25% Discount. Apply Code 25percentOff at Checkout!

Part Number:
ZT-339
Condition:
New
Availability:
In Stock
1:
Supports USB 3.2 Gen 1 Standard
2:
Provides 4 USB 3.2 & 3.0 Device Ports
3:
Built-in Two-Way PoH + Modules
4:
Industrial Camera Control
5:
Free USA Shipping
6:
International Shipping w/Wire Transfer
7:
Hassle-free Warranty
8:
5-Year Zenty Warranty
9:
Free Returns within 60 Days
10:
Lifetime Technical Support
11:
Save 5% with Wire Transfer or Check

This Zenty ZT-339 USB 3.2 / 3.0 Extender over HDBaseT 3.0 is a new generation of USB 3.2 and USB 3.0 extender. It supports USB 3.2 Gen 1 standard with up to 5Gbps USB data transmission rate, and is backwards compatible with USB 3.0, USB 2.0, and USB 1.1 specifications.

This USB extender can extend USB 3.2 and 3.0 data up to 100m / 328ft. via a single Cat 6a/7 F/FTP or U/FTP cable. It has a built in 4-port USB hub in the receiver which can be connected with multiple USB devices. It adopts advanced USB data transmission technology, and only occupies one USB tier. For multiple USB device scenarios, this extender can also be used with an external USB 3.2 and 3.0 hub. With two-way PoH + function, this extender only requires one power supply to be connected to the transmitter or receiver to power both units which is suitable for scenarios where the receiver can’t be connected to a power supply (such as outdoor monitoring scenario).

Zenty ZT-339 USB 3.2 / 3.0 Extender over HDBaseT 3.0 Features:

  • Supports USB 3.2 Gen 1 standard, and backward compatible with USB 3.0, USB 2.0, and USB 1.1 standards.
  • Supports up to 5Gbit/s data transmission rate.
  • Supports transmitting USB signal up to 100m/328ft. via a signal Cat 6a/7 F/FTP or U/FTP cable.
  • Pure hardware architecture is compatible with Control / Bulk / Interrupt / Isochronous transmission protocols.
  • Provides four USB 3.2 & 3.0 device ports on the receiver, includes one 1.5A port for connecting high-power USB devices.
  • Occupies one USB hub tier and supports connecting additional USB hub devices.
  • Supports RS232 and FSYNC GPIO pass-through for industrial camera control.
  • Plug and play, no driver is required, and compatible with multiple operating systems.
  • Support firmware upgrading via micro-USB port.
  • Built-in two-way PoH + modules, only needs to be connected to one power adapter to the transmitter or receiver to power both units.

Why not buy this Zenty ZT-339 USB 3.2 / 3.0 Extender over HDBaseT 3.0 from HDTV Supply today?

Zenty ZT-339 USB 3.2 / 3.0 Extender over HDBaseT 3.0 Specification:

  • Technical:
    • Transmitter: 1 x USB HOST (USB Type-B); 1 x RS232 & FSYNC (3.5mm, 4-Pin Phoenix Connector); 1 X USB3-LINK (RJ45); 1 x POWER; 1 x FW (Micro-USB)
    • Input/Output Port:
    • Receiver: 4 x USB DEVICE (USB Type-A); 1 x RS232 & FSYNC (3.5mm, 4-Pin Phoenix Connector); 1 X USB3-LINK (RJ45); 1 x POWER; 1 x FW (Micro-USB)
    • USB Standard: USB 3.2 Gen1, backward compatible with USB 3.0, USB 2.0, USB 1.1
    • Data Rate: Up to 5Gbit/s
  • General:
    • Operating Temperature: 0°C to 45°C (32°F to 113°F)
    • Storage Temperature: -20°C to 70°C (-4°F to 158°F)
    • Humidity: 10% to 90%, non-condensing
    • ESD Protection: Human-body Model: ±8kV (Air-gap discharge)/+4kV (Contact discharge)
    • Power Supply: 20V 3A
    • Power Consumption (Max): 31.28W (Pair, USB fully loaded)
    • Device Dimension: Transmitter/Receiver: 150mm x 20.5mm x 100mm / 5.9" x 0.81" x 3.94"
    • Product Weight: Transmitter: 0.35kg/0.77lb; Receiver: 0.34kg/0.75lb

Why not buy this Zenty ZT-339 USB 3.2 / 3.0 Extender over HDBaseT 3.0 from HDTV Supply today?

Zenty ZT-339 User Manual

Why not buy this Zenty ZT-339 USB 3.2 / 3.0 Extender over HDBaseT 3.0 from HDTV Supply today?

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4Ă—2 — 4 sources to 2 displays
  • 4Ă—4 — 4 sources to 4 displays
  • 8Ă—8 — 8 sources to 8 displays
  • 8Ă—9 — 8 sources to 9 displays
  • 16Ă—16 — 16 sources to 16 displays
  • 16Ă—32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.