HDBaseT HDMI Card & Extender Sets

HDBaseT HDMI Card & Extender Sets

HDBaseT HDMI Card & Extender Sets
These WolfPack™ HDBaseT HDMI Card & Extender Sets are used with our WolfPack Modular Matrix Chassis & feature:
  • 1-Port Cards
  • 1080p, 4K/30 & 4K/60 HDMI Sets
  • HDBaseT Output Cards & Receivers
  • HDBaseT Input Cards & Transmitters
  • Video Wall Sets
  • Sets with Resolution Scaling
  • Sets with 100ms Switching
  • Set w/separate audio
  • Fiber & Universal Sets

These WolfPack HDBaseT HDMI Card & Extender Sets are used with HDTV Supply's WolfPack Modular Matrix Switchers using our 9x9, 18x18 & 36x36 chassis. They consist of an HDBaseT Input or Output card & its companion HDBaseT Transmitters or HDBaseT Receiver. Our WolfPack HDBaseT HDMI Card & Extender Sets can send a 4K signal up to 330' using a single CAT6 cable. These HDBaseT HDMI Card & Extender Sets add virtually zero latency to the HDMI audio & video signal with less than 7 microseconds (0.000007 sec) over 330 feet using a CAT6 cable. At 100 feet that is about 3 microseconds (0.000003 sec). This means for example, in a bar, factory, church or auditorium, the speakers lips are always in synch with the video image on all the TVs & projectors 100's of feet away. The HDBaseT HDMI Card & Extender Sets have Power Over Cable (POC) technology meaning an AC adapter is not needed as the card powers the HDBaseT extender (TX & RX). This makes for a very clean installation behind the matrix as there are no AC adapters.

Create your HDBaseT Extender Sets from the below:

4K/30 HDBaseT Input Card to 110' & 1080p to 220' with HDMI Loopout

4K/30 HDBaseT Output Card to 110' & 1080p to 220' with HDMI Loopout

4K/30 HDBaseT Input Card to 110' & 1080p to 220'

4K/30 HDBaseT Output Card to 110' & 1080p to 220'

4K/30 HDBaseT Input Card to 220' & 1080p to 330'

4K/30 HDBaseT Output Card to 220' & 1080p to 330'

Compare Selected