This WolfPack 1080p 32x40 Modular HDMI Matrix Switcher with HDMI Connectors In and Out. The chassis back plane allows various technologies to be converted and switched eliminating external converters and it allows any input to be routed to any output, or the same input to be routed to all outputs, or any combination with multiple technologies.

These systems support the latest products that have HDMI 2.0 and HDCP 2.3 compliancy for the new DirecTV receivers, cable boxes, Firesticks, Roku's, AppleTVs and other devices that require HDCP 2.3 and HDMI 2.0.

IN & OUT CONTROL (ALL FREE): This HDMI Matrix Switch can control the Ins and Outs the following ways:

• Front Panel LCD Display Control
• iPad or iPhone apps
• Android phone or Android tablet apps
• Samsung Galaxy phone or Galaxy tablet apps
• WEB GUI
• IR Remote Control aimed at the front panel (Does not turn TVs OFF & ON)
• Windows Software
• Dual RS-232 and
• Dual TCP/IP control

NOTE: The above control sends any input, to any output, in any combination on a tablet. If you want to, say, change the channels on a cable box or DirecTV receiver, see our WolfPad TV Control Systems. 

Reasons that sets this WolfPack 1080p 32x40 Modular HDMI Matrix Switcher apart from others:

1. 48x48 Chassis Size
2. Supports low cost 1080p video
3. Built-in Video Wall Processor
4. Fast 80ms Switching & 80ms Latency
5. All TVs in synch with each other
6. Resolution Scaling on all Out Cards
7. Uses 4-port IN & OUT Cards with separate audio out on all cards
8. 40-Preset Scenes that can be Saved and Recalled
9. Optional cards available like SDI, Fiber, CAT6, and more
10. Rack-mountable

Internal Video Wall Processing: Not only is this product an HDMI matrix switch, but it is also designed to support multiple video wall configurations. Your tablet is used to create video walls and the number of video walls is only limited by the number of outputs that you have.

It supports Drag-N-Drop Video Wall Processing & setups and any TV can be rotated. To set up video walls all you need to use is a PC so you can then change the sources using a tablet. See the examples below:

Example 1: Create a 2x2 Video Wall using 4-TVs with either one large picture or 4-individual pictures at one, or multiple locations.

Example 2: Create a 3x3 Video Wall using 9-TVs with either one large picture or 9-individual pictures at one, or multiple places.

Separate Audio Out on Inputs and output cards: The matrix allows audio out on the input cards 3.5mm audio connector and audio out the output cards with a 3.5mm audio connector.

Seamless Switching: Our WolfPack Modular HDMI Matrix Switcher can be configured with instantaneous video switching which delivers full 1080p video powered by our WolfPack engine implemented at each output port. It switches instantly taking only 80ms or 0.08 seconds. 

Hardware Scaling via DIP Switches on both in and out cards: The 8-pin DIP switch on the cards are for the up/down manual scaling of resolutions. Each HDMI card has an 8-pin DIP switch to select multiple resolution settings to conform to your HDMI source devices and the HDMI destination devices.

WolfPack 1080p 32x40 Modular HDMI Matrix Switcher  Configuration Example:

• 1 - 48-card in and 48-out chassis
• 8 - 4-port 1080p HDMI input cards = 32-1080p HDMI inputs with HDCP 2.3 Compliancy
• 10 - 4-port 1080p HDMI output cards = 40-1080p HDMI outputs with HDCP 2.3 Compliancy

By having 4-port slide in cards the matrix is exceptionally reliable as in the unlikely even there is a loss of signal you just replace the card with a spare you have purchased or order another from us. The complete matrix doesn't have to be sent in for repair.

The heart of this WolfPack 1080p 32x40 Modular HDMI Matrix Switcher supports is the WolfPack chassis backplane which allows customization of the configuration for input and output cards to match every need of the system and application. The matrix supports hot plugs, and you can change the cards while the equipment is still working.

Why not buy this WolfPack 1080p 32x40 Modular HDMI Matrix Switcher today?