This Thor Broadcast H-IPRF-16QAM 16Ch IP To RF Modulator is a simple all-in-one utility device to convert up to 1024 IP Transport Streams in UDP / RTP into 16 non-adjacent QAM Channels. This Thor Broadcast high-density IP to QAM modulator is designed to take content delivered via an IP backbone or CDN system and modulate the programming onto digital QAM cable channels for distribution over coax. This product includes a 1RU chassis supporting two individual Ethernet inputs injecting up to 840Mbps on each Ethernet RJ45 connector outputs all programming onto a single RF F-Type connector for easy output into your RF Coax infrastructure. This single RU form factor allows you create your own IPTV to RF headend in a single chassis.

All QAM Channels and IP inputs are managed from the easy to use NMS RJ45 port connection on the front of the unit allowing you to quickly and easily access your programming from Thor's easy to read GUI that can be accessed from anywhere on your network. The IPTV programming input is standard headend format, meaning basic UDP / RTP unicast/multicast IGMP v2 / v3 addresses and port format. This impressive density allows a single chassis to convert an IPTV Ethernet backbone feed to be converted to a full lineup of digital cable DVB-C channels for easy distribution.

Thor Broadcast H-IPRF-16QAM 16Ch IP To RF Modulator Features:

IPTV Modulator includes 2x Gigabit Ethernet input interfaces
16/32 Clear QAM Channel Outputs - Non-Adjacent 50-960Mhz
Maximum 1024 Channels TS over UDP, RTP & Unicast / Multicast
Output Of RF on 16 Multiplexed, Scrambled, or QAM (DVB-C) Channels
Gigabit Ethernet is serviced by SFP interface
Supports Unicast and Multicast, supports IGMP v2 / v3
Max 840Mbps for each GE Input
Supports Up to 180 PIDs per channel with PID remapping (manual or auto)
Web NMS (Network Management Software) for easy online access and management

Why not buy this Thor Broadcast H-IPRF-16QAM 16Ch IP To RF Modulator today?

Thor Broadcast H-IPRF-16QAM 16Ch IP To RF Modulator Specification:

input	input	512 ????2 IP inputs, 2x 100 / 1000M Ethernet port (SFP)
	Transport Protocol	TS over UDP / RTP unicast and multicast, IGMP V2 / V3
	Transmission Rate	Max 840Mbps for each input GE
mux	Channel input	1024
	Output Channel	16
	max PIDs	180 per channel
	Functions	PID remapping (auto / manually optional)
		PCR accurate adjusting
		PSI / SI table Automatically generating
Scrambling parameters	Max simulscrypt CA		4
	Scramble Standard		ETR289, ETSI 101 197, ETSI 103 197
	Connection		Local / remote connection
Modulation parameters	QAM Channel		16 non-adjacent carriers
	Modulation Standard		EN300 429 / ITU-T J.83A / B
	symbol Rate		5.0 ~ 7.0Msps, stepping 1ksps
	Constellation		16, 32, 64, 128, 256QAM
	FEC		RS (204, 188)
RF Output	Interface	1 F-type output for 16 carriers, 75??? impedance
	RF Range	50 ~ 960MHz, stepping 1kHz
	Output Level	-20dBm ~ + 10dBm (~ 87 117db???V), 0.1dB stepping
	MAYOR	??? 40dB
	ACLR	-60 dBc
TS output	16 IP output over UDP / RTP / RTSP, unicast / multicast, 2 x 100 / 1000M Ethernet Ports
System	Network management software (NMS)
General	Dimnsions	420mm ????440mm ????44.5mm (WxLxH)
	Weight	10lbs
	Temperature	0 ~ 45°C (Operation) -20 ~ 80°C (Storage)
	Power Supply	AC 100V ± 10%, 50 / 60Hz or 220V AC ± 10%, 50 / 60Hz
	Consumption	15.4W