This Thor Broadcast H-IP-32RF IP to RF Modulator is an Analog NSTC /PAL analog modulator with IPTV input, works as s Digital IPTV streams to 32 analog channel modulator - gateway, it has two GB Ethernet ports for content IPTV SMPTS / MPTS TS's input that will convert up to 32 programs to standard NTSC or PAL or SECAM modulated channels. Each port can handle up to 840 Mbps or 64 IP programs. H-IP-32RF supports H.265 HEVC, H.264, and MPEG2 transport stream encoded formats. The output is 32 programs on adjacent or non-adjacent carriers within a 400 MHz bandwidth between 47 and 862 MHz. It works as an IPTV decoder demodulator integrated with an analog modulator.
Thor Broadcast H-IP-32RF IP to RF Modulator Features:
- OSD (Logo and Caption) insertion, CC/Subtitle/Teletext
- Program info modifies, multiple audio selection options
- 2 GE ports (max 64 IP input over MPTS/SPTS), Max 840Mbps for each GE input
- HEVC/H.265, H.264/AVC, MPEG-2 TS Decapsulation
- Processing of up to 32 IP multicast groups of a Gigabit Ethernet MPEG TS into up to 32 standard PAL or NTSC
- 32 non-adjacent or adjacent carriers output within 400MHz
- Web-based Network management
Why not buy this Thor Broadcast H-IP-32RF IP to RF Modulator today?
Thor Broadcast H-IP-32RF IP to RF Modulator Specifications:
|
Input |
Interface/rate |
2 GE ports (max 64 IP input) Max 840Mbps for each GE input |
|
Stream |
UDP, UDP / RTP, 1-7 packets, FEC, SPTS, MPTS |
|
|
Transport Protocol |
UDP/RTP, unicast and multicast, IGMP V2/V3 |
|
|
Packet Length |
188 / 204 Bytes |
|
|
Decoding Parameters |
Video |
HEVC/H.265, H.264/AVC Level 4.1 HP, MPEG-2 MP@HL |
|
Audio |
MPEG-1/2 Layer 1/2, (HE-)AAC, AC3 (Optional) |
|
|
Data |
Teletext, Teletext subtitles, DVB Subtitling |
|
|
Resolutions |
HEVC/H.265: 1080@60P, 1080@60I, 1080@50P, 1080@50I, 720@60P, 720@50P H.264/AVC: 1080@60I, 1080@50P, 1080@50I, 1080@30P, 1080@25P, 720@60P, 720@50P, 576@50I, 480@60I MPEG2: 1080@60I, 1080@50I, 720@60P, 720@50P, 576@50I, 480@60I |
|
|
Aspect ratio |
4:3/16:9 |
|
|
Modulation Parameters |
Number of channels |
Up to 32 non-adjacent or adjacent carriers output |
|
Connectors |
75Ω, F-jack |
|
|
Frequency range |
47 – 862MHz, digital modulation process |
|
|
Output Bandwidth |
400MHz |
|
|
Output level |
maximum 112dBμV |
|
|
Return loss |
≥ 14dB |
|
|
Spurious frequency dist. |
≥ 60dB |
|
|
Stereo cross talk |
> 55dB |
|
|
Residual carrier accuracy |
1% |
|
|
TV standard |
PAL B/G/D/K/M/N, NTSC M/J/4.43 SECAM (under development) |
|
|
Video-signal to noise ratio |
≥ 60dB |
|
|
Network Interface |
Management |
1 x 100 Base-T Ethernet (RJ 45) |
|
Data |
2 x 1000 Base-T Ethernet (RJ 45) |
|
|
Protocol |
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, IGMPv2/v3 |
|
|
Others |
Image resolution |
up to 1080i |
|
CNR |
60 dB (after internal combining) |
|
|
SNR |
> 53 dB (after internal combining) |
|
|
Sampling frequency |
48, 44.1, 32 |
|
|
Output volume adjustment |
0 - 100 % |
|
|
General |
Dimensions |
420mm×440mm×44.5mm (WxLxH) |
|
Temperature |
0~45°C(operation), -20~80°C(storage) |
|
|
Power Supply |
AC100V±10%, 50/60Hz or AC 220V±10%,50/60Hz |
Why not buy this Thor Broadcast H-IP-32RF IP to RF Modulator today?
Thor Broadcast H-IP-32RF IP to RF Modulator Manual
Why not buy this Thor Broadcast H-IP-32RF IP to RF Modulator today?
Can the H-IP-32RF accept multicast IPTV streams?
A: Yes — the H-IP-32RF accepts multicast (and unicast) MPEG transport streams and supports IGMP v2 and v3 for multicast membership.
Can I place the 32 RF outputs on adjacent or non-adjacent carriers and what spectrum span is available?
A: Yes — the outputs may be on adjacent or non-adjacent carriers within a 400 MHz output bandwidth.
What RF frequency range and connector does the modulator use?
A: The RF output covers 47–862 MHz and uses a 75Ω F‑jack connector.
Which video codecs and resolutions does the decoder support for HEVC/H.265?
A: The decoder supports HEVC/H.265 and accepts up to 1080@60P among the listed HEVC resolutions.
Does the unit provide audio format support for AC‑3 (Dolby Digital)?
A: AC3 support is listed as optional, not as a guaranteed built-in audio decoder.
Can the H-IP-32RF carry subtitles or teletext from the input streams?
A: Yes — it supports teletext, teletext subtitles and DVB subtitling data from input streams.
Does the device include web-based management and what network protocols are supported for control and data?
A: Yes — it provides web-based network management and supports standard IP protocols including HTTP, RTP, ARP and IPv4.
Can I adjust the audio output level per channel on the modulator?
A: Yes — the unit includes output volume adjustment with a range from 0 to 100%.
What is the maximum RF output level reported by the product?
A: The document lists a maximum output level of 112 dBμV.
Will this handle single‑program streams and multi‑program transport streams (SPTS/MPTS)?
A: Yes — the device accepts both SPTS and MPTS transport streams and can process streams with packet FEC as listed.
