This Thor Broadcast H-ASI-AMP 1x16 DVB-ASI Distribution Amplifier with PID Modification is a high output platform designed for large scale distribution of ASI programming in broadcast environments. Based on application specific relocking circuitry designed for multi rate ASI signals to ensure very clean outputs. This platform also includes SNMP for remote alarm notification if input is not detected.
Thor Broadcast H-ASI-AMP 1x16 DVB-ASI Distribution Amplifier with PID Modification Features:
- Intelligent managed 2x16 ASI Distribution Amplifier
- Fully network managed with program information
- Compatible with any DVB-ASI input streams
- Outputs two independent stream configurations
Why not buy this Thor Broadcast H-ASI-AMP 1x16 DVB-ASI Distribution Amplifier with PID Modification today?
Thor Broadcast H-ASI-AMP 1x16 DVB-ASI Distribution Amplifier with PID Modification Specifications:
|
ASI Input |
|
|
Input Connector |
2x ASI input, BNC(75) According with EN50083-9 ASI Connector SMPTE259M standard, SDI Video signal Reflect impedance: <15dB@270MHz |
|
ASI Output |
|
|
Output Connector |
8(ASI5108) or 16(ASI5116) ASI Outputs, BNC(75) According with EN50083-9 ASI Connector standard,SMPTE259M standard,SDI Video signal |
|
Reflect impedance |
<15dB@270MHz |
|
Lower residual jitter |
180PSpp@270MHz Equalizer |
|
Re-clocked |
130pbs |
|
Output Level |
800mV±10% |
|
Environmental |
|
|
Power Supply |
AC 110-220V 50/60Hz |
|
Power consumption |
20W |
|
Operating temperature |
-10-50°C |
|
Storage temperature |
-10-75°C |
|
Dimensions |
318mm( L)X 483mm(W)X 44mm(H)(1RU) |
|
Weight |
3.5kg |
Why not buy this Thor Broadcast H-ASI-AMP 1x16 DVB-ASI Distribution Amplifier with PID Modification today?
Will this accept any DVB-ASI input stream?
A: Yes; the H-ASI-AMP is described as compatible with any DVB-ASI input streams.
Does the unit provide network management and remote alarm notification?
A: Yes; the H-ASI-AMP is fully network managed and includes SNMP for remote alarm notification if the input is not detected.
Is the ASI interface compliant with broadcast connector and SDI standards?
A: Yes; the ASI connectors are reported to follow EN50083-9 and reference SMPTE259M (SDI) signaling.
Does the unit re-clock outputs and what output jitter is specified?
A: Yes; outputs are re-clocked and lower residual jitter is specified at 180PSpp@270MHz.
What output electrical level and impedance are given for the ASI outputs?
A: The listed output level is 800mV±10% and the reflected impedance is <15dB@270MHz.
Does the H-ASI-AMP platform include PID modification?
A: Yes; the product is named and described as including PID Modification.
Will this fit in a standard 1U rack space and what are the rack dimensions?
A: Yes; dimensions are listed as 12.52 inches (L) x 19.02 inches (W) x 1.73 inches (H), corresponding to 12.52 in x 19.02 in x 1.73 in, which is a 1U height.
How much does the unit weigh for rack planning?
A: The weight is listed as 7.72 pounds, which is 7.72 pounds.
