Thor Broadcast H-ASI-QAM ASI to RF QAM Modulator + IP

Thor Broadcast

Thor Broadcast H-ASI-QAM ASI to RF QAM Modulator + IP
Price: $3,474.00
Today's Price: $2,895.00

5% Discount. Apply Code 5percentOff at Checkout!

Part Number:
H-ASI-QAM
Condition:
New
Availability:
In Stock
1:
Web NMS Interface
2:
DATA Output via RJ45
3:
Fully Complying With DVB-C
4:
Five Constellation Modes
5:
Free USA Shipping
6:
Authorized Thor Direct Warranty
7:
2-Year Warranty

This Thor Broadcast H-ASI-QAM ASI to RF QAM Modulator + IP allows for ASI input and ASI output for program management to decode and output via IP and RF. It provides a more powerful receiving ability of various Transport Streams that come from an encoder, multiplexer, DVB gateway, scrambler and video server. In addition, the modulator also has the ability of outputting RF while simultaneously sending out IP. This device supports local and remote control through NMS software.

This unit has wide array of functional uses from Broadcasting, Interactive Services, News Gathering and other Broadband satellite applications.

Thor Broadcast H-ASI-QAM ASI to RF QAM Modulator + IP Features:

  • Fully complying with DVB-C(EN300 429), ITU-T J.83A/B/C standard
  • Symbol rate adjusting range: 5.0Msps~9.0Msps
  • Five constellation modes: 16QAM, 32QAM, 64QAM, 128QAM and 256QAM
  • ATSC, DVB-T, ISDB-T modulations avaialble - model dependent
  • ASI input
  • DATA output via RJ45 - Mulitcast and Unicast, RTP,RTSP,UDP
  • Scrambler
  • Web NMS Interface
  • SNMP
  • Huge buffer memory for the burst code stream
  • Intelligent null packet deleting, automatically TS filling
  • PCR accurate adjusting
  • NIT insertion
  • PID filtering, re-mapping and PSI/SI update synchronously
  • Output frequency range: 30MHz~1000MHz in 1 kHz step
  • Output frequency attenuation range: -16dBm~+12dBm in 0.5dB step
  • LCD and keyboard operation
  • NMS operation

Why not buy this Thor Broadcast H-ASI-QAM ASI to RF QAM Modulator + IP from HDTV Supply today?

Thor Broadcast H-ASI-QAM ASI to RF QAM Modulator + IP Specification:

INPUT
Input 1 channel ASI input, BNC interface, 75Ω
MODULATION
Supported QAM, ATSC, DVB-T, ISDB-T (model dependent), default QAM modulation
Standard EN300 429 / ITU-T J.83 A/B/C
Symbol Rate 5.0 ~ 9.0 Msps (1 ksps stepping)
Constellation 16 / 32 / 64 / 128 / 256 QAM
FEC RS (204, 188)
RF OUTPUT
Connector F Type, 75Ω impedance
RF Range 30 ~ 1000 MHz (1 kHz stepping)
Output Attenuation -16 dBm to +12 dBm (0.5 dB stepping)
IP OUTPUT
Formats UDP / RTP / RTSP – SPTS & MPTS, Unicast / Multicast
SYSTEM
Control LCD/keyboard operation, NMS supported
Supported English
Method Via Ethernet
GENERAL
Metric 482 mm × 300 mm × 44 mm
Weight 2.3 kg
Operating 0 ~ 45°C
Storage -20 ~ 80°C
Input AC 110V ±10% (50/60Hz) or AC 220V ±10% (50/60Hz)
Power Use 22W

Why not buy this Thor Broadcast H-ASI-QAM ASI to RF QAM Modulator + IP from HDTV Supply today?

Thor Broadcast H-ASI-QAM Quick Setup Guide

Why not buy this Thor Broadcast H-ASI-QAM ASI to RF QAM Modulator + IP from HDTV Supply today?

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4Ă—2 — 4 sources to 2 displays
  • 4Ă—4 — 4 sources to 4 displays
  • 8Ă—8 — 8 sources to 8 displays
  • 8Ă—9 — 8 sources to 9 displays
  • 16Ă—16 — 16 sources to 16 displays
  • 16Ă—32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.