This Thor Broadcast F-8A-XLR-TxRx 8 XLR Audio over Fiber are able to send balanced audio over fiber much further than traditional copper. Our Audio Interface with XLR kit has both a transmitter and receiver unit. Available options are for 2, 4, 8, 16 or 32 XLR inputs/outputs can be used on a single transmitter unit and sent over fiber to the receiver unit that also has an equal number of XLR outputs.
The fiber allows the signal to be sent over a long distance without losing any quality in the signal. The kit is 16-bit digitally encoded broadcast quality balanced audio over one multi-mode or single-mode optical fiber. Thor XLR Audio Splitters are typically used in applications for Rental, Staging, Concerts, Theater, Churches, Stadiums, Theme Parks, Broadcast/Studio, Intercom, CCTV audio and Professional AV applications.
Popular devices to use in conjunction with the XLR transmitter and receiver are: XLR Audio Mixers, Digital Audio Recorders with XLR IN/OUT and Audio siganl Splitter with XLR. They are available for stand-alone or rack-mount installations. Our standard fiber connectors are ST/PC, but it could also be ordered as SC/PC or FC/PC. Basic units support up to 20Km of single mode / 3000 multimode fiber, other modes are available - 40km, 80km, 120km.
Thor Broadcast F-8A-XLR-TxRx 8 XLR Audio over Fiber Features:
- 3-Pin Balanced XLR Audio input/output
- Uni-directional 2 or 4 or 8 or 16 or 32 Channel
- Bi-directional over single fiber available on 2 and 4 Channel model
- 12V DC Power input
- Single mode fiber up to 20km, Multimode fiber up to 3000feet
- Easy to Use, Plug and Play Untis
Why not buy this Thor Broadcast F-8A-XLR-TxRx 8 XLR Audio over Fiber today?
Thor Broadcast F-8A-XLR-TxRx 8 XLR Audio over Fiber Specification:
| Optical | |
| Wavelength | 1310nm or 1310/1550 for bi-directional models |
| Output Power | -8dBm (+-2db) |
| Optic fiber | 50/125u multimode, 62.5/125u multimode, 9/125u single mode |
| Rx sensitivity | -25dBm |
| Optical connector | ST/PC (optional FC/PC, SC-PC) |
| Distance | 20Km for singlemode and 0~2KM (MM), 40, 80 120Km - model specific |
| Balanced Audio | |
| Number of Channels | 2 Input +2 Output |
| Input Connector | XLR (female) |
| Output Connector | XLR (male) |
| Input / Output Impedance | 10K Ohm |
| Input capacitance LINE inputs | 10 pF |
| Max input/output voltage | 1.0Vp-p |
| Frequency Response | 10 Hz - 20kHz @±3dB |
| Sample Rates From | 48kHz |
| SNR | > 80dB |
| Electrical & Mechanical | |
|
Input Power Requirements: |
DC 5V@2A |
|
Power Adapter: |
AC 90V~240V |
|
Power Consumption: |
< 5W |
|
Stand-Alone Dimensions: |
168mm × 154mm × 45mm ( L: 6 3/4" D 4 1/2" H: 1 3/4" for the mounting holes) |
|
Shipping Weight: |
(Transmitter & Receiver ) 2.5kg |
| Environmental | |
| Operating Temperature: | -20°C ~ +75°C |
| Storage Temperature: | -40°C ~ +85°C |
| Relative Humidity: | 0% ~ 95% (non-condensing) |
| MTBF: | >100,000 hours |
Why not buy this Thor Broadcast F-8A-XLR-TxRx 8 XLR Audio over Fiber today?
How to Connect HDMI RF Petit to PC Via Ethernet
Why not buy this Thor Broadcast F-8A-XLR-TxRx 8 XLR Audio over Fiber today?
Is the 8-channel Thor Broadcast F-8A-XLR-TxRx uni-directional or bi-directional?
A: The 8-channel F-8A-XLR-TxRx is uni-directional; bi-directional operation over a single fiber is only noted for the 2- and 4-channel models.
What optical wavelength and connector options does this unit support?
A: The product supports 1310nm (and 1310/1550 for bi-directional models) and ships with ST/PC fiber connectors; FC/PC and SC-PC are listed as optional.
How far can this unit send audio over single-mode fiber?
A: Single-mode operation is supported up to 20Km.
What sample rate and frequency range does the audio support?
A: The unit supports 48kHz sample rate and a frequency response of 10 Hz to 20 kHz at ±3 dB.
What signal quality specs are listed (SNR and max level)?
A: Signal-to-noise ratio is specified as greater than 80 dB and maximum input/output voltage is 1.0 Vp-p.
What are the optical transmit/receive power figures?
A: Optical output power is listed as -8 dBm (±2 dB) and receiver sensitivity is -25 dBm.
What input and output impedance is specified for the analog audio?
A: Input/output impedance is listed as 10K Ohm.
Will this kit carry broadcast-quality balanced audio over long distances?
A: Yes; the kit is described as 16-bit digitally encoded broadcast-quality balanced audio intended for long-distance fiber transmission.
Which fiber connector will I receive by default, and can I change it?
A: The standard fiber connector is ST/PC, and FC/PC or SC/PC are listed as optional alternatives.
Can I use the 8-channel kit for live sound applications like concerts and theaters?
A: Yes; the product description lists live events and professional AV uses such as rental, staging, concerts, theater, and broadcast/studio among typical applications.
What environmental conditions will the units tolerate in operation and storage?
A: Operating temperature range is −20°C to +75°C, storage temperature is −40°C to +85°C, and relative humidity tolerance is 0% to 95% non‑condensing.
