This Thor Broadcast F-2A-XLR-B-TxRx 2 Bi-Didrectional XLR Audio Over Fiber are able to send balanced audio over fiber much further than traditional copper. Our Audio Interface with XLR kit has both a transmitter and receiver unit. Available options are for 2, 4, 8, 16 or 32 XLR inputs/outputs can be used on a single transmitter unit and sent over fiber to the receiver unit that also has an equal number of XLR outputs.
The fiber allows the signal to be sent over a long distance without losing any quality in the signal. The kit is 16-bit digitally encoded broadcast quality balanced audio over one multi-mode or single-mode optical fiber. Thor XLR Audio Splitters are typically used in applications for Rental, Staging, Concerts, Theater, Churches, Stadiums, Theme Parks, Broadcast/Studio, Intercom, CCTV audio and Professional AV applications.
Popular devices to use in conjunction with the XLR transmitter and receiver are: XLR Audio Mixers, Digital Audio Recorders with XLR IN/OUT and Audio siganl Splitter with XLR. They are available for stand-alone or rack-mount installations. Our standard fiber connectors are ST/PC, but it could also be ordered as SC/PC or FC/PC. Basic units support up to 20Km of single mode / 3000 multimode fiber, other modes are available - 40km, 80km, 120km.
Thor Broadcast F-2A-XLR-B-TxRx 2 Bi-Didrectional XLR Audio Over Fiber Features:
- 3-Pin Balanced XLR Audio input/output
- Uni-directional 2 or 4 or 8 or 16 or 32 Channel
- Bi-directional over single fiber available on 2 and 4 Channel model
- 12V DC Power input
- Single mode fiber up to 20km, Multimode fiber up to 3000feet
- Easy to Use, Plug and Play Untis
Why not buy this Thor Broadcast F-2A-XLR-B-TxRx 2 Bi-Didrectional XLR Audio Over Fiber today?
Thor Broadcast F-2A-XLR-B-TxRx 2 Bi-Didrectional XLR Audio Over Fiber Specification:
| Optical | |
| Wavelength | 1310nm or 1310/1550 for bi-directional models |
| Output Power | -8dBm (+-2db) |
| Optic fiber | 50/125u multimode, 62.5/125u multimode, 9/125u single mode |
| Rx sensitivity | -25dBm |
| Optical connector | ST/PC (optional FC/PC, SC-PC) |
| Distance | 20Km for singlemode and 0~2KM (MM), 40, 80 120Km - model specific |
| Balanced Audio | |
| Number of Channels | 2 Input +2 Output |
| Input Connector | XLR (female) |
| Output Connector | XLR (male) |
| Input / Output Impedance | 10K Ohm |
| Input capacitance LINE inputs | 10 pF |
| Max input/output voltage | 1.0Vp-p |
| Frequency Response | 10 Hz - 20kHz @±3dB |
| Sample Rates From | 48kHz |
| SNR | > 80dB |
| Electrical & Mechanical | |
|
Input Power Requirements: |
DC 5V@2A |
|
Power Adapter: |
AC 90V~240V |
|
Power Consumption: |
< 5W |
|
Stand-Alone Dimensions: |
168mm × 154mm × 45mm ( L: 6 3/4" D 4 1/2" H: 1 3/4" for the mounting holes) |
|
Shipping Weight: |
(Transmitter & Receiver ) 2.5kg |
| Environmental | |
| Operating Temperature: | -20°C ~ +75°C |
| Storage Temperature: | -40°C ~ +85°C |
| Relative Humidity: | 0% ~ 95% (non-condensing) |
| MTBF: | >100,000 hours |
Why not buy this Thor Broadcast F-2A-XLR-B-TxRx 2 Bi-Didrectional XLR Audio Over Fiber today?
How to Connect HDMI RF Petit to PC Via Ethernet
Why not buy this Thor Broadcast F-2A-XLR-B-TxRx 2 Bi-Didrectional XLR Audio Over Fiber today?
Does the kit include both transmitter and receiver units?
A: Yes; the product is sold as an audio interface kit that includes both a transmitter and a receiver unit.
How many XLR channels does this F-2A-XLR-B-TxRx kit support?
A: This listing documents a 2-channel configuration (2 inputs + 2 outputs) and also refers to available options of 2, 4, 8, 16 or 32 channels on other models.
What XLR connectors and wiring does the unit use?
A: It uses 3-pin balanced XLR connectors, with female XLR for inputs and male XLR for outputs.
What fiber types, connectors, and maximum distance does it support?
A: The unit supports multimode (50/125 or 62.5/125) and single-mode (9/125) fiber with ST/PC connectors standard (optional FC/PC or SC-PC), and lists up to 20 km for single mode and up to 0–2 km for multimode with model-specific options of 40, 80, and 120 km.
Can I send balanced XLR audio over long distances with this unit?
A: Yes; the product transmits digitally encoded balanced XLR audio over fiber to carry signals much farther than copper, with single-mode distances documented up to 20 km and multimode distances listed up to about 0–2 km (model dependent).
Will this work bi-directionally over a single fiber?
A: Yes for the 2- and 4-channel models: the listing states bi-directional over a single fiber is available on 2- and 4-channel models.
What audio performance and digital parameters are documented?
A: The page documents 16-bit digitally encoded audio with a frequency response of 10 Hz–20 kHz ±3 dB, sample rate from 48 kHz, and signal-to-noise ratio greater than 80 dB.
Can I rack-mount the transmitter and receiver?
A: Yes; the product is available for stand-alone or rack-mount installations.
What are the operating environment limits for the units?
A: The documented operating temperature range is −20°C to +75°C with storage from −40°C to +85°C and 0–95% non-condensing relative humidity.
Why not buy this Thor Broadcast F-2A-XLR-B-TxRx 2 Bi-Didrectional XLR Audio Over Fiber from HDTV Supply today?
Can this unit send balanced XLR audio over fiber without copper audio runs?
A: Yes — the Thor Broadcast F-2A-XLR-B-TxRx sends balanced audio over fiber so you can avoid long copper audio runs.
Does the product include both a transmitter and a receiver?
A: Yes — the kit includes both a transmitter and a receiver unit.
Is bi-directional audio supported on the 2-channel model?
A: Yes — bi-directional over a single fiber is available on the 2-channel model.
What XLR connectors does the unit use for inputs and outputs?
A: Inputs use 3-pin XLR (female) and outputs use 3-pin XLR (male).
What audio sample rate does this unit support?
A: The unit supports a 48 kHz sample rate.
What are the input/output impedance and maximum signal level?
A: The input/output impedance is 10K ohm and the maximum input/output voltage is 1.0 Vp-p.
What frequency range and signal-to-noise performance can I expect?
A: Frequency response is 10 Hz to 20 kHz at ±3 dB, and SNR is greater than 80 dB.
Will this work with my XLR audio mixer or digital recorder that has XLR I/O?
A: Yes — the product is designed for use with XLR audio mixers and digital audio recorders that have XLR IN/OUT.
What fiber types and optical connectors does this unit support?
A: It supports multimode and single-mode fiber and ships with ST/PC connectors by default, with SC/PC or FC/PC available as options.
Can this unit be used for live events such as concerts, theaters, or stadiums?
A: Yes — the product is intended for live and professional AV use, including rental, staging, concerts, theater, churches, stadiums and theme parks.
Is the unit digitally encoded and what audio quality level is claimed?
A: Yes — the kit is 16-bit digitally encoded and described as broadcast-quality balanced audio.
