This QSC MP-A40V 4-Channel Amplifier build on a 50-year legacy of amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.
QSC MP-A40V 4-Channel Amplifier Features:
- FlexAmp Technology allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio
- Class-D output circuitry and switchmode power supply for high efficiency and low cost of ownership
- 1RU amplifier design for rack space savings
- Load selector for driving 4 Ω, 8 Ω, 70 V or 100 V on each channel
- Selectable 80 Hz highpass filter offered on each channel
- Power saving features - Auto-standby (after 28 minutes with seamless auto-ramp when signal returns) and remote standby input
- Amp status remote output
Why not buy this QSC MP-A40V 4-Channel Amplifier today?
QSC MP-A40V 4-Channel Amplifier Specifications:
| Specifications | MP-A40V |
|---|---|
| Channels | 4 |
| Power (all channels driven) 8 Ω 4 Ω 70 V 100 V |
200 W 200 W 200 W 200 W |
| FlexAmp Technology | Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio |
| Frequency response at 8 Ω | 20 Hz – 20 kHz +/- 0.5 dB |
| Signal to Noise | > 103 dB |
| Input sensitivity | 1.23 V (+4 dBu) |
| Gain at 8 Ω | 30.0 dB |
| Output circuitry | Class D |
| Input impedance | >10k, balanced or unbalanced |
| Maximum input level | 12.3 V (+24 dBu) |
| Cooling Type Operating temperature range |
Forced air cooling, thermally regulated fan speed, side/rear-to-front airflow Maximum: -10° - 50° C, recommended: 0° - 35° C, reduced performance above 40° C |
| Connectors Input connectors Remote connectors Output connectors |
Four 3.5mm Euro, 3-pin (green) One 3.5mm Euro, 5-pin (black) Two 5.0mm Euro, 4-pin (green) |
| Front panel indicators | Power, signal (per channel), limit / mute / protect (per channel) |
| Rear panel indicators | Bi-Color LED signal / limit/ mute/ protect |
| User-configurable operating modes (per channel) | DIP switch selectable, low impedance 4 Ω or 8 Ω, high impedance direct drive 70 V or 100 V |
| Remote I/O | Remote standby, amplifier status enunciation on 3.5 mm connectors |
| Highpass filter | 80 Hz DIP switch engaged per channel |
| Dimensions | 1.75 in x 19 in x 14.8 in (44 mm x 483 mm x 377 mm) |
| Net weight | 9.3 lb (4.2 kg) |
| Shipping weight | 13.9 lb (6.3 kg) |
| Power requirements | Universal power supply (with active power factor correction), 100 – 240 VAC, 50 -60 Hz |
| Agency approvals | UL, CE, RoHS/WEEE compliant, FCC class B (conducted and radiated emissions) |
| Carton contents | IEC cable, quick start guide, connector pack |
