This NTI ST-IPC6FOUSB4K-R-POE 4K 10.2Gbps HDMI USB KVM Extender Over IP via CATx Cable with Remote Unit Extend 4Kx2K 30Hz HDMI monitor, USB keyboard, USB mouse, and IR up to 394 feet using Gigabit Ethernet. Create video walls up to 8x16 128 screens.
The XTENDEX® 4K HDMI USB KVM Over IP Extender provides remote KVM (USB keyboard, USB mouse, and 4Kx2K HDMI monitor) access to a USB computer up to 394 feet (120 meters) over a Gigabit network using a single CAT5e/6/6a/7 cable. The extender consists of the ST-IPC6FOUSB4K-R-POE local unit that connects to a computer and the ST-IPC6FOUSB4K-R-POE remote unit that connects to an HDMI monitor, USB keyboard, and USB mouse.
The local and remote units can be connected together for a Point-to-Point connection via CATx cable, or a Point-to-Many or Many-to-Many connection via a Gigabit network switch.
NTI ST-IPC6FOUSB4K-R-POE 4K 10.2Gbps HDMI USB KVM Extender Over IP via CATx Cable with Remote Unit Features:
- Supports Ultra-HD 4Kx2K resolutions to 3840x2160 @30Hz, HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
- Cascade network switches to extend the length long distances.
- HDMI features supported:
- HDMI 1.4
- RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0
- LPCM 5.1/7.1, Dolby Digital, and DTS
- Bandwidth up to 340 MHz (10.2 Gbps)
- HDCP 1.4 compliant.
- Two USB 2.0 ports for keyboard, mouse, flash drive, or touchscreen display.
- Keyboard and mouse are hot-pluggable.
- Power over Ethernet (PoE) – power supply not required at the local or remote unit when used with a switch that supports PoE.
- Supports video wall installations from 1x2 to 8x16 screens.
- Displays can be rotated 90, 180 and 270°.
- Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required if using a managed network switch.)
- Bi-directional IR control from input and output locations.
- Manage transmitter/receiver connections and video wall configuration with built-in software or DIP switches.
- Supports full-duplex RS232 up to 115200 baud.
- Customizable EDID table.
- Easily expandable – add receivers as you add control stations.
- Mounting brackets included for easy surface/wall mounting.
Why not buy this NTI ST-IPC6FOUSB4K-R-POE 4K 10.2Gbps HDMI USB KVM Extender Over IP via CATx Cable with Remote Unit today?
NTI ST-IPC6FOUSB4K-R-POE 4K 10.2Gbps HDMI USB KVM Extender Over IP via CATx Cable with Remote Unit Specifications:
- Local Unit
- Compatible with a USB computer with Ultra-HD HDMI output.
- Multiplatform support: Windows 7/8/10/11, Windows Server 2008/2012/2016/2019/2022, Linux, FreeBSD, and MAC OS 10/11/12/13.
- One female HDMI connector.
- One female USB Type B connector.
- Two female 3.5mm ports for connecting an IR emitter and receiver (included).
- IR frequency: 38kHz to 56kHz.
- 3-pin screw terminal for RS232.
- Supports full-duplex RS232 up to 115200 baud.
- One female RJ45 port for sending/receiving high definition video/audio, USB, RS232, and IR signals.
- One SFP receptacle – fiber extension not supported at this time
- DIP switch for specifying unit ID.
- Remote Unit
- One female HDMI connector.
- Supports Ultra-HD 4Kx2K resolutions to 3840x2160 @30Hz, HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
- Supports embedded digital audio through HDMI compatible TVs or audio receivers.
- Two female USB 2.0 Type A connectors for keyboard, mouse, flash drive, or touchscreen display.
- Keyboard and mouse are hot-pluggable.
- Two female 3.5mm ports for connecting an IR emitter and receiver (included).
- IR frequency: 38kHz to 56kHz
- 3-pin screw terminal for RS232.
- Supports full-duplex RS232 up to 115200 baud.
- One female RJ45 port for sending/receiving high definition video/audio, USB, RS232, and IR signals.
- One SFP receptacle – fiber extension not supported at this time.
- DIP switch for specifying unit ID.
- Power
- Power over Ethernet: With a switch that supports PoE, a power supply is not required at the local or remote unit.
- Compliant with IEEE 802.3af, class 0 standards.
- Local and remote unit:
- Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter (included).
- Output: 5VDC, 2A
- Dimensions
- Local and remote unit WxDxH (in): 6.30x4.06x1.18 (160x103x30 mm).
- Environmental
- Operating temperature: 23 to 95°F (-5 to 35°C).
- Storage temperature: 14 to 140°F (-10 to 60°C).
- Operating relative humidity: 5 to 90% non-condensing RH.
- Regulatory Approvals
- CE, FCC, RoHS
- Warranty
- Two years
- Max Distance
- 394 feet over CAT5e/6/6a/7 cable.
- Cascade network switches to extend the length long distances.
- Cables
- Interface cables between the computer/display and the transmitter/receiver are required for proper operation.
- Supports cable lengths to 20 feet for 4K resolutions and lengths to 50 feet for 1080p@60Hz using passive HDMI cables.
- Use HD-xx-MM cable to connect an HDMI source or display (not included).
- Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet (not included).
- Use DP-HD-xx-MM cables to connect a DisplayPort computer or display up to 15 feet (not included).
- Use USB3C-HD4K-xx-MM to connect a 4K@30Hz computer with USB Type C connector up to 10 feet (not included).
- Use DVI-HD-xM-MM to connect a DVI computer up to 5 meters (not included).
- Supports resolutions to 1080p.
- Use CAT5e/6/6a/7 solid straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
- One 5.92 ft (1.8 m) male USB Type A to male USB Type B cable included with the transmitter.
Why not buy this NTI ST-IPC6FOUSB4K-R-POE 4K 10.2Gbps HDMI USB KVM Extender Over IP via CATx Cable with Remote Unit today?
NTI ST-IPC6FOUSB4K-R-POE Specifications