NTI SPLITMUX-4K6GB-4LC Low-Cost 4K HDMI Quad Screen Multiviewer

NTI SPLITMUX-4K6GB-4LC VGA Low-Cost 4K HDMI Quad Screen Multiviewer allows Ultra-HD 4Kx2K 30Hz video from four different sources to be simultaneously displayed on a single HDMI monitor in real time. It is capable of displaying the video signals in quad, dual, PiP, or full screen mode.

NTI SPLITMUX-4K6GB-4LC Low-Cost 4K HDMI Quad Screen Multiviewer Features:

Quad, Dual, Picture in Picture, and Full Screen display modes.
Supports Ultra-HD resolutions up to 3840x2160 @30Hz YUV 4:4:4, and HDTV resolutions to 1080p @60Hz.
HDMI features supported:

HDMI 1.4
Up to 36-bit Deep Color
RGB, YCbCr 4:4:4, YCbCr 4:2:2
Dolby, LPCM, DTS
Bandwidth up to 6.75 Gbps

Accepts HDCP 1.4/2.2 signals.
Seamlessly switch between the four sources.
Switch audio independently of video from active HDMI video sources (video sources turned on and being displayed).

E.g. source 3 and source 4 video are active while only source 3 audio is active).

Control the multiviewer through front panel buttons or IR remote.
Mounting brackets included for easy surface/wall mounting.

Why not buy this NTI SPLITMUX-4K6GB-4LC Low-Cost 4K HDMI Quad Screen Multiviewer today?

NTI SPLITMUX-4K6GB-4LC Low-Cost 4K HDMI Quad Screen Multiviewer Specifications:

Video Input

Four female HDMI connectors.
- Supports HDMI devices such as DVD/Blu-Ray players, satellite receivers and HDTV tuners.
- Does not support DVI video sources.
Supported video input resolutions:
- Ultra-HD 4Kx2K resolutions (3840x2160 @30Hz)
- HDTV resolutions to 1080p @60Hz
Supports HDCP 1.4/2.2

Video Output

One female HDMI connector for display.
- Use an HDMI to DVI adapter/cable to connect a DVI display.
Supported video output resolutions:
- Ultra-HD 4Kx2K resolutions (3840x2160 @30Hz)
- HDTV resolutions to 1080p @60Hz
Supports embedded digital audio through HDMI compatible TVs or audio receivers.

Power

Input: 100 to 240 VAC at 50 or 60Hz via AC adapter.
Output: 12 VDC, 1A
Power consumption: 8W

Dimensions

WxDxH (in): 7.48x4.45x0.67 (190x113x17 mm)

Environmental

Operating temperature: 32 to 104˚F (0 to 40˚C).
Operating and storage relative humidity: 5 to 90% non-condensing RH.

Regulatory approvals

CE, RoHS, FCC

Warranty

Two years

Cables

Interface cables between the video sources/display and the multiviewer are required for proper operation.
- Supports input cable lengths to 20 feet for 4K@30Hz resolutions and lengths to 50 feet for 1080p@60Hz using passive HDMI cables.
- Supports output cable lengths to 30 feet for 4K@30Hz resolutions and lengths to 50 feet for 1080p@60Hz using passive HDMI cables.
- Longer cables can be used provided they have a built-in video equalizer (also known as "active HDMI cables").
Use HD-xx-MM HDMI cables to connect to an HDMI source or display up to 100 feet away from the multiviewer.
- Video Input:
  - HD-3/6/10/15/20-MM supports resolutions to 4K@30Hz.
  - HD-30/50/75/100-MM supports resolutions to 1080p@60Hz.
- Video Output:
  - HD-3/6/10/15/20/30-MM supports resolutions to 4K@30Hz.
  - HD-50/75/100-MM supports resolutions to 1080p@60Hz.
Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet away from the multiviewer.
- Video Input:
  - HD-ACT-20/25/30/40/50/60-MM supports resolutions to 4K@30Hz.
  - HD-ACT-75/100-MM supports resolutions up to 1080p@60Hz
- Video Output:
  - HD-ACT-20/25/30/40/50/60/75/100-MM supports resolutions to 4K@30Hz.
Use DVI-HD-xM-MM cables to connect a DVI display to the multiviewer.
- Supports resolutions up to 1080p@60Hz.
Cables not included.