The Marshall VSW-2000 selects one of four SDI sources for a single output. Front-panel, serial and IR control support monitor routing and installed AV applications. Reclocking and equalization support signal transport, while the compact unit can be used on a desk or installed in a rack.
Marshall VSW-2000 Features
- Four-source selection. Four SDI inputs feed one switched output. This lets a display or other receiving device select among several connected sources without moving cables at the input panel.
- SD, HD and 3G-SDI support. The switcher accommodates supported SD-SDI, HD-SDI and 3G-SDI signals. It can be used in systems based on several common SDI standards within its specified capabilities.
- Reclocked and equalized output. Signal reclocking and equalization support SDI transport through the switcher. These functions concern signal quality and do not establish frame synchronization between differently timed video sources.
- Direct front-panel operation. Buttons provide source selection at the unit. This gives an operator or installer a local control path even when a wider room-control system is not being used.
- Remote serial or IR control. RS-232 and IR remote operation allow source selection away from the front panel. This suits installed monitor-routing arrangements where the switcher is located inside equipment furniture or a rack.
- Desktop or rack placement. The unit supports desktop and 1RU rack installation. It is a source selector; seamless transitions between unmatched source formats are not claimed, so switching behavior should be considered in a live presentation design.
Specifications
| Manufacturer | Marshall Electronics |
|---|---|
| Model | VSW-2000 |
| Topology | Four SDI inputs to one switched output |
| Signal support | 3G-SDI, HD-SDI and SD-SDI |
| Output processing | Reclocking and equalization |
| Control | Front-panel buttons, RS-232 or IR remote |
| Installation | Desktop or 1RU rack mount |
| Application | Source selection for monitor routing or conference systems |
Technical Questions
How are the inputs and outputs arranged?
Four SDI inputs to one switched output.
Which signal families are supported?
3G-SDI, HD-SDI and SD-SDI.
What is specified for output processing?
Reclocking and equalization.
How can it be controlled?
Front-panel buttons, RS-232 or IR remote.
What is specified for installation?
Desktop or 1RU rack mount.
What is specified for application?
Source selection for monitor routing or conference systems.
Buying and Installation Questions
What is the VSW-2000 used for?
It is intended for selecting among compatible SDI sources.
What should I check before ordering?
This listing does not claim frame synchronization or seamless switching between unmatched source formats.
