The Marshall RCP-PLUS places camera painting and adjustment at a central touchscreen. It combines RS-485 and IP camera control for installations with cameras mounted away from the operator. Individual and group adjustments support picture matching, while control without an on-screen camera menu helps keep the production picture clear.
Marshall RCP-PLUS Features
- Touchscreen access to camera settings. The 5-inch touchscreen presents camera controls at the operating position. It gives the operator a dedicated surface for picture adjustment rather than requiring direct access to each installed camera.
- Serial and network camera control. VISCA over RS-485 and VISCA over IP support two control infrastructures. A system can accommodate compatible serial cameras and IP cameras through the controller's respective interfaces.
- Up to 70 cameras across interfaces. Capacity is up to seven RS-485 cameras plus 63 IP cameras. These separate limits matter when planning camera groups and connections; the total is shared across the two control methods.
- Picture matching from the control position. Color, pedestal, gain, gamma and shutter adjustments support camera painting. Individual or global adjustments help an operator bring compatible cameras into a more consistent appearance across a production.
- Adjustments without menu overlays. Supported adjustments can be made without displaying the camera's OSD in the video. This keeps setup controls from obscuring the picture while the operator changes available settings.
- Installation and firmware access. A three-pin XLR provides the serial connection, and 12 V DC or PoE supplies power. USB firmware upgrade access supports maintenance as camera and controller compatibility evolves.
Specifications
| Manufacturer | Marshall Electronics |
|---|---|
| Model | RCP-PLUS |
| Display | 5-inch touchscreen |
| Serial control | VISCA over RS-485 |
| IP control | VISCA over IP |
| Capacity | Up to seven RS-485 cameras and 63 IP cameras; 70 combined |
| Camera adjustment | Color, pedestal, gain, gamma, shutter and other supported camera settings |
| On-screen behavior | Adjustments can be made without displaying the camera OSD in the video |
| Serial connection | Three-pin XLR connection |
| Power | 12 V DC or PoE |
| Updates | USB firmware upgrade port |
Technical Questions
What display is built in?
5-inch touchscreen.
What is specified for serial control?
VISCA over RS-485.
What is specified for ip control?
VISCA over IP.
What is specified for capacity?
Up to seven RS-485 cameras and 63 IP cameras; 70 combined.
What is specified for camera adjustment?
Color, pedestal, gain, gamma, shutter and other supported camera settings.
What is specified for on-screen behavior?
Adjustments can be made without displaying the camera OSD in the video.
What is specified for serial connection?
Three-pin XLR connection.
How is it powered?
12 V DC or PoE.
Buying and Installation Questions
What is the RCP-PLUS used for?
It is intended for matching and controlling compatible Marshall cameras from a booth or control position.
What should I check before ordering?
Available controls depend on the camera model and installed firmware.
Which configuration does this SKU identify?
Marshall RCP-PLUS Touchscreen Camera Controller with RS-485 and IP. Match this exact model identifier when selecting accessories or replacement equipment.
Where can I check installation details?
Use the manufacturer documentation linked in the Manuals tab for wiring, setup and interface-specific limits.
