The Marshall CV574 combines a compact UHD camera with HDMI and network video, including NDI HX3. Its included wide-view M12 lens and PoE support fixed positions around a studio or venue. Network control keeps camera adjustment available when the body is mounted out of easy reach.
Marshall CV574 Features
- UHD and HD capture options. An 8.46 MP, 1/2.8-inch Sony sensor supports 3840 × 2160p, 1080p/1080i and 720p formats. Configure the resolution and frame rate for the selected codec and output rather than assuming every mode has identical limits.
- Included wide-view optics. The 4.0 mm M12 lens provides approximately 77.2° of horizontal coverage. It gives the compact camera a wide starting shot for installations near a performance, presentation or working area.
- NDI HX3 network workflow. NDI HX3 supports connection to compatible NDI production systems. Its available formats depend on the camera's mode matrix, so the chosen NDI format should be part of the system design.
- Additional streaming choices. RTSP, RTMP and SRT, with H.264 and HEVC codecs, provide alternatives for network delivery. These options let the camera serve compatible receivers and streaming workflows beyond an NDI-only installation.
- Remote camera access. VISCA over IP, NDI Tools and the camera's web interface provide network control options. Picture and operating adjustments remain accessible from a control position after the camera is installed.
- Power and connector protection. PoE supplies power over Ethernet, with an included 12 V supply as another option. The aluminum-alloy body and rear connector protection support compact rigging while keeping attention on the cable connection area.
Specifications
| Manufacturer | Marshall Electronics |
|---|---|
| Model | CV574 |
| Sensor | 8.46 MP, 1/2.8-inch Sony sensor |
| Lens | Included 4.0 mm M12 lens with approximately 77.2° horizontal view |
| Video formats | 3840 × 2160p, 1920 × 1080p/1080i and 1280 × 720p |
| Video interfaces | HDMI and Ethernet |
| Streaming | NDI HX3, RTSP, RTMP and SRT; H.264 and HEVC codecs |
| Control | VISCA over IP, NDI Tools and camera web interface |
| Power | PoE over Ethernet or included 12 V supply |
| Construction | Aluminum alloy body with rear connector protection |
Technical Questions
What image sensor does it use?
8.46 MP, 1/2.8-inch Sony sensor.
What lens is specified?
Included 4.0 mm M12 lens with approximately 77.2° horizontal view.
Which video formats are listed?
3840 × 2160p, 1920 × 1080p/1080i and 1280 × 720p.
What is specified for video interfaces?
HDMI and Ethernet.
Which streaming protocols does it support?
NDI HX3, RTSP, RTMP and SRT; H.264 and HEVC codecs.
How can it be controlled?
VISCA over IP, NDI Tools and camera web interface.
How is it powered?
PoE over Ethernet or included 12 V supply.
What is specified for construction?
Aluminum alloy body with rear connector protection.
Buying and Installation Questions
What is the CV574 used for?
It is intended for fixed-camera production, streaming or installed AV systems that match its listed interfaces.
What should I check before ordering?
Output resolution and frame rate depend on the selected codec and interface; check the manufacturer format matrix when specifying NDI operation.
Which configuration does this SKU identify?
Marshall CV574 Miniature UHD NDI HX3 and HDMI Camera. Match this exact model identifier when selecting accessories or replacement equipment.
Where can I check installation details?
Use the manufacturer documentation linked in the Manuals tab for wiring, setup and interface-specific limits.
