The Marshall CV355-10X provides remotely controlled optical zoom in a fixed camera body. It suits production positions where the viewing direction stays fixed but framing needs to change. Simultaneous SDI and HDMI outputs support a production feed and monitoring, with audio and control connections on the supplied breakout cable.
Marshall CV355-10X Features
- 10x optical framing adjustment. The 4.7–47 mm lens provides 10x optical zoom, with a separate 12x digital zoom option. Use optical framing to tighten a fixed-position shot without relying on digital enlargement.
- Full HD production capture. The 1/2.8-inch progressive CMOS sensor supports video up to 1920 × 1080 at 60 fps. This accommodates HD production of presenters, demonstrations and other moving subjects.
- Simultaneous SDI and HDMI. Both outputs are available together, allowing the camera to feed SDI production equipment and an HDMI monitor. A local display can therefore remain useful while the main video feed continues downstream.
- Remote serial adjustment. RS-485 supports VISCA and Pelco P/D control. A compatible controller can adjust the camera from the operating position, reducing trips to a camera mounted above or behind the action.
- Automatic or manual focus. Automatic focus assists when the subject distance changes, while manual focus gives the operator control over a fixed focal plane. Choose the behavior appropriate to the shot rather than leaving every setup on autofocus.
- Breakout access to audio and power. The supplied Hirose breakout carries the 3.5 mm TRS mic/line input, and a 12 V supply is included. These connections consolidate the camera's supporting interfaces at the installed position.
Specifications
| Manufacturer | Marshall Electronics |
|---|---|
| Model | CV355-10X |
| Optical zoom | 10x optical, 4.7–47 mm; 12x digital zoom also available |
| Video resolution | Up to 1920 × 1080 at 60 fps |
| Video outputs | Simultaneous 3G-SDI and HDMI |
| Sensor | 1/2.8-inch progressive CMOS |
| Focus | Automatic or manual |
| Control | RS-485 with VISCA and Pelco P/D support |
| Audio input | 3.5 mm TRS mic/line input on the breakout cable |
| Power | 12 V DC supply included; 6 W specified draw |
| Cable | Hirose breakout cable included |
Technical Questions
What optical zoom does it provide?
10x optical, 4.7–47 mm; 12x digital zoom also available.
What video resolution does it support?
Up to 1920 × 1080 at 60 fps.
Which video outputs are available?
Simultaneous 3G-SDI and HDMI.
What image sensor does it use?
1/2.8-inch progressive CMOS.
What is specified for focus?
Automatic or manual.
How can it be controlled?
RS-485 with VISCA and Pelco P/D support.
What audio input does it accept?
3.5 mm TRS mic/line input on the breakout cable.
How is it powered?
12 V DC supply included; 6 W specified draw.
Buying and Installation Questions
What is the CV355-10X used for?
It is intended for fixed-camera production, streaming or installed AV systems that match its listed interfaces.
Which configuration does this SKU identify?
Marshall CV355-10X 10x Full HD 3G-SDI and HDMI Zoom Camera. Match this exact model identifier when selecting accessories or replacement equipment.
Where can I check installation details?
Use the manufacturer documentation linked in the Manuals tab for wiring, setup and interface-specific limits.
