Kramer TP-580RA 4K60 4:2:0 HDMI Receiver with RS-232, IR & Stereo Audio Extraction over Long-Reach HDBaseT is a high-performance, long-reach HDBaseT receiver for 4K@60Hz (4:2:0) HDMI, RS-232, IR and stereo audio signals over twisted pair that de-embeds the stereo audio signal on its digital and analog audio ports. It extends video signals to up to 40m (130ft) over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.
Kramer TP-580RA 4K60 4:2:0 HDMI Receiver with RS-232, IR & Stereo Audio Extraction over Long-Reach HDBaseT Features:
- High Performance Standard Extender - Professional HDBaseT extender for providing long-reach signals over twisted-pair copper infrastructures. TP-580RA is a standard extender that can be connected to any market-available HDBaseT-compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
- HDMI Signal Extension - HDMI 2.0 and HDCP 1.4 compliant. Supports deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D. EDID and CEC signals are passed through from the source to the display.
- I-EDIDPro Kramer Intelligent EDID Processing - Intelligent EDID handling, processing and pass-through algorithm that ensure Plug and Play operation for HDMI source and display systems.
- Multi-channel Audio Extension - Up to 32 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
- Audio Extraction (De-embedding) - According to auto-sensed signal attributes and per user selection, the transmitted digital audio signal or Audio Return Channel (ARC) signal, is extracted from the AV signal. This signal is transmitted to stereo, digital audio output, and concurrently converted to an analog signal for transmission to balanced stereo analog audio output, in parallel to being transmitted to the HDMI AV output. This enables high-quality audio playback by routing the audio to external speakers in parallel to routing the audio to the local speakers found on the connected AV acceptor device (such as a TV or laptop).
- Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
- Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
- Cost-effective Maintenance - Status LED indicators for HDMI and HDBT ports facilitate easy local maintenance and troubleshooting. Local firmware upgrade via RS-232 connection ensures lasting, field-proven deployment.
- Easy Installation - Compact DigiTOOLS fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 3 units in a 1U rack space with the recommended rack adapter.
Why not buy this Kramer TP-580RA 4K60 4:2:0 HDMI Receiver with RS-232, IR & Stereo Audio Extraction over Long-Reach HDBaseT today?
Kramer TP-580RA 4K60 4:2:0 HDMI Receiver with RS-232, IR & Stereo Audio Extraction over Long-Reach HDBaseT Specification:
- INPUTS : 1 HDBT: On an RJ-45 female connector
- OUTPUTS
- 1 HDMI: On a female HDMI connector
- 1 Unbalanced Stereo Audio: On a 3.5mm mini jack
- 1 S/PDIF: On an RCA connector
- PORTS
- 1 IR: On a 3.5mm mini jack for IR link extension
- 1 RS−232: On a 3-pin terminal block connector for serial link extension and device firmware upgrade
- EXTENSION LINE
- Compliance: HDBaseT 1.0
- Up to 40m (130ft): At 4K@60Hz (4:2:0) (When using Kramer HDBaseT cables)
- Up to 70m (230ft): At full HD (1080p@60Hz 36bpp) (When using Kramer HDBaseT cables)
- VIDEO
- Max. Data Rate: 10.2Gbps (3.4Gbps per graphic channel)
- Max. Supported Resolution: 4K@60Hz (4:2:0) 24bpp
- Standards Compliance: HDMI 2.0 and HDCP 1.4
- ANALOG AUDIO
- Level: Up to 1 Vrms
- THD + NOISE: 0.03% @ 1 KHz at nominal level
- EXTENDED RS-232 : Baud Rate: 300 to 115200
- CONTROL RS-232 : Baud Rate: 115200
- ENCLOSURE
- Size: DigiTools
- Type: Aluminum
- Cooling: Convection ventilation
- POWER
- Source: 12V DC
- Consumption: 570mA
- ENVIRONMENTAL CONDITIONS
- Operating Temperature: 0Ëš to 40ËšC (32Ëš to 104ËšF)
- Storage Temperature: -40Ëš to +70ËšC (-40Ëš to 158ËšF)
- Humidity: 10% to 90%, RHL non-condensing
- ACCESSORIES : Included: Power supply unit
- PRODUCT DIMENSION : 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
- PRODUCT WEIGHT : 0.3kg (0.6lbs) approx.
- SHIPPING DIMENSION : 15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x 3.43" ) W, D, H
- SHIPPING WEIGHT : 0.7kg (1.5lbs) approx.
What maximum extension distance does this receiver support for 4K@60Hz (4:2:0)?
A: The TP-789Rxr supports up to 100m (330ft) extension at 4K@60Hz (4:2:0).
What longer distances are supported for 1080p/Full HD signals?
A: For Full HD (1080p@60Hz) the device documents up to 130m (430ft) in normal HDBT range and up to 180m (590ft) in HDBaseT ultra-long-range mode.
How does the TP-789Rxr handle PoE power over the HDBaseT link?
A: The TP-789Rxr auto-senses the extension line PoE status and either provides power to a remote PoE acceptor or accepts power from a remote PoE provider.
What Ethernet bandwidth is available over the extended HDBaseT link?
A: The extended Ethernet link supports up to 100Mbps over the HDBaseT extension.
What RS-232 and IR extension ranges and characteristics does it support?
A: Serial extension supports 300 to 115200 baud, and bidirectional IR supports 20kHz to 100kHz.
How does the device handle EDID and CEC between source and display?
A: EDID and CEC signals are passed through from the source to the display, and Kramer’s I-EDIDPro provides intelligent EDID pass-through for plug-and-play operation.
What front-panel status indicators and controls help with local troubleshooting?
A: Front indicators include IN, OUT, LINK, POE FEEDER and ON LEDs, and rear DIP-switches configure operation modes.
Will this unit power a PoE wall-plate over the same HDBaseT cable?
A: Yes — the TP-789Rxr can provide power over the extension cable to a PoE acceptor such as a PoE wall-plate when it is acting as the power provider.
Do I have to use Kramer cables for the HDBaseT extension?
A: You can connect an HDBaseT-compliant extension product, but Kramer recommends using their high-performance Kramer cables for optimum reach and performance.
Can I rack-mount the TP-789Rxr?
A: Yes — you can mount it side-by-side in 1U rack space using the optional RK-3T rack adapter; the unit also supports bracket or rubber-foot surface mounting.
