This Kramer TP-121XL Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter is a high performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. It converts the input signals to a twisted pair signal and transmits them over CAT 5 cable to a compatible receiver like the TP-122xl (sold separately).
Perfect for:
- Presentation and multimedia applications.
- Long range graphics distribution for schools, hospitals, security, and stores.
Kramer TP-121XL Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter Features:
- Max. Resolution - WUXGA & 1080p.
- HDTV Compatible.
- EDID Capture - Captures EDID from the display or uses pre-programmed default EDID.
- Interference Protection - Increased level of protection against noise, spikes and interference in adverse environments.
- System Range - More than 250m (more than 820ft).
- Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
- Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 60m (200ft) of each other.
Why not buy this Kramer TP-121XL Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter from HDTV Supply today?
Kramer TP-121XL Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter Specifications:
- INPUTS
- 1 VGA on a 15-pin HD connector
- 1 unbalanced stereo audio on a 3.5mm mini jack
- OUTPUT
- 1 twisted pair on an RJ-45 connector
- RESOLUTION
- Up to WUXGA and 1080p
- AUDIO BANDWIDTH (-3DB)
- 20Hz to 20kHz @-3dB
- AUDIO S/N RATIO
- 84dB
- TOTAL GAIN
- Audio: Analog/analog: 0dB
- Analog/SPDIF: - 12dBFS
- COUPLING
- AC
- THD+N
- Audio: <0.02%
- POWER CONSUMPTION
- 12V DC, 190mA (370mA when powering both devices)
