This Kramer QL-SW 8 CHANNEL SWITCHING RELAY MODULE is an 8 channel switching relay module designed for small to medium sized lighting automation requirements. The DIN rail mountable module is totally self-contained with its own integral PSU and can be configured as a part of a central system or as a standalone system. In a standalone mode, the module operates in the QL NET mode. When used as a part of a central system with QL NE100 controller, the module operates in DMX-512 mode.
This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The channel numbers for each output can be configured.
After power loss, on restoration the system will restore each channel to the “last selected state” prior to the power loss.
Kramer QL-SW 8 CHANNEL SWITCHING RELAY MODULE Features:
- Operates in Stand-alone mode and centralized mode with QL NE100
- Each channel delay time configurable to reduce surge
- currents during simultaneous switching ON of circuits
- Accepts standard DMX-512 signal
- DIN rail mountable
- Up to 99 zones configurable in QL NET mode
- Up to 8 Programmable partition zones
- Up to 8 programmable scenes in QL NET mode
- Manual override switch per channel
- Individual channel settable switch on level
Why not buy this Kramer QL-SW 8 CHANNEL SWITCHING RELAY MODULE today?
Kramer QL-SW 8 CHANNEL SWITCHING RELAY MODULE Specifications:
- Power Supply: 100-270V AC, 50/60 Hz
- Power Requirement: 30mA @ 230V AC
- QL NET Power Supply Capacity: 400mA
- Protocol: QL NET, DMX-512
- Output Rating: Max per channel: 20A
- Connectors
- QL NET/DMX-512: Non-detachable 4
- pin 3.5mm connector, 2 nos. 2.54mm 4 pin bar connectors
- Power in: Non-detachable 3 pin 3.5mm connector
- Relay in/out: Non-detachable 16 pin 3.5mm connector (2 per channel)
- Programming Port: 2.54mm 8 pin bar connector
- Override Switches: 8 nos. SPDT mini slide switches
- LED indicators: 8 Green LEDs mimicking the output of the 4 relays, 1 Red LED indicating power and 2 Green LEDs indicating communication signal status
- Display: LCD
- Environment
- Ambient Temperature: 0°C to 50°C
- Relative Humidity: less than 80%
- Dimensions: 215mm (W) x 88mm (H) x 57mm (D)
- Weight: 800g
