Kramer KDS-8 4K HDR SDVoE Video Streaming Transceiver

Kramer

Price: $2,120.00
Today's Price: $1,696.00

10% Discount. Apply Code 10percentOff at Checkout!

Part Number:
KDS-8
UPC:
7291063089634
Availability:
Usually ships the same day
1:
User configured as encoder or decoder
2:
Max resolution - 4K@60Hz (4:4:4)
3:
Fully standard and compliant SDVoE codec
4:
Free Shipping
10:
7-Year Warranty
5:
Free Lifetime Telephone, CHAT, TEXT, FAX & Email Tech Support

Kramer KDS-8 4K HDR SDVoE Video Streaming Transceiver is a high-performance, zero latency, 4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over copper cable. KDS-8 can be set as either an encoder or decoder. As an encoder, it encodes and streams the HDMI input along with IR, RS-232, and analog audio, over an IP network. As a decoder, it receives the encoded signal and decodes it for output.

Kramer KDS-8 4K HDR SDVoE Video Streaming Transceiver Features:

  • High-Performance Video Streaming Transceiver - Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression.
  • Maximum Compatibility - Fully standard and compliant SDVoE codec, enables compatibility with other software and hardware streaming platforms.
  • HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support
  • High-Speed 10G Network Switch - Managed switch provides: multicast, jumbo frames, IGMP snooping and fast leave.
  • Analog Audio Embedding - Provides an unbalanced analog audio port for embedding audio into the streaming signal.
  • Bi-directional IR over IP - Control an IR device located on the decoder side from the encoder and vice versa.
  • Bi-directional RS-232 over IP - Control a serial device located on the decoder side from the encoder and vice versa.
  • Video Wall Support.
  • Multiview Support
  • Easy, Cost-Effective Maintenance - LED indicators for main power, Tx/Rx mode setting, HDMI video source detection, and Tx and Rx transmission enable easy local maintenance and troubleshooting.
  • Simple System Management - Remote system management support to enable quick and efficient remote system and device life-cycle management.

Why not buy this Kramer KDS-8 4K HDR SDVoE Video Streaming Transceiver today?

Kramer KDS-8 4K HDR SDVoE Video Streaming Transceiver Specification:

  • INPUTS
    • 1 HDMI: On a female HDMI connector
    • 1 IR: On a 3.5mm mini jack
  • OUTPUTS
    • 1 HDMI: On a female HDMI connector
    • 1 IR: On a 3.5mm mini jack
  • PORTS
    • 1 10GbE Ethernet: On an R-J45 connector
    • 1 Unbalanced Stereo Audio: On a 3.5mm mini jack
    • 1 1GbE Ethernet: On an R-J45 connector
    • 1 RS-232: On a 3-pin terminal block connector
  • VIDEO: Standards Compliance: 10/12-bit HDR (Point-to-Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0,
  • EXTENSION LINE
    • Signal Compression: Ultra-light compression, lossless for most content
    • Range: Up to 100m in point-to-point mode
  • AUDIO: Standards Compliance: Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources
  • POWER: Source: 12V DC, Consumption: 3A
  • Operating Temperature: 0 to + 45˚C (32 to + 113 ˚F), 10% to 90%, non-condensing
  • Storage Temperature: -20 to +70˚C (-4 to + 158 ˚F), 10% to 90%, non-condensing
  • Humidity: 10% to 90%, non-condensing
  • PRODUCT DIMENSION: 23.10cm x 11.60cm x 2.50cm (9.09" x 4.57" x 0.98" ) W, D, H
  • PRODUCT WEIGHT: 0.5kg (1.1lbs) approx.
  • SHIPPING DIMENSION: 35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H
  • SHIPPING WEIGHT: 1.2kg (2.6lbs) approx.

Why not buy this Kramer KDS-8 4K HDR SDVoE Video Streaming Transceiver today?

Kramer KDS-8 User Manual

Why not buy this Kramer KDS-8 4K HDR SDVoE Video Streaming Transceiver today?