This Kramer HDb2312-NA SD Video Encoder is a SD video encoder/QAM modulator with 12 composite video/analog 3.5mm audio inputs. MPEG−2 QAM RF output via 12 digital channels using 4 QAM RF frequencies. One delay matched analog audio output. Supports Closed Captions. Rack ears and power cord included. No ZvShow.
Kramer HDb2312-NA SD Video Encoder Features:
- RF Modulation
- 12 Composite Inputs
- MPEG2–QAM RF output
Why not buy this Kramer HDb2312-NA SD Video Encoder from HDTV Supply today?
Kramer HDb2312-NA SD Video Encoder Specification:
- General
- Power: 100–240 VAC 50/60 Hz, 60W max. 30W Typical, IEC 60320–C14
- Compliance: FCC Class A, IEC60065, EN61000 (see manual 70–00031–00), CE, RoHS, RCM C–Tick
- Mounting: Rack ears shipped attached, 1RU high
- Cooling: Dual internal cooling fans, Front inlet, Rear exhaust
- MBTF: 62,000 hours
- Enclosure Dimensions: 1.72 in. (H) x 17.33 in. (W) x 9.9 in. (D) / 43.6 mm (H) x 440.2 mm (W) x 251.5 mm (D)
- Carton Dimensions (individual): 4.25 in. (H) x 30.875 in. (W) x 12.125 in. (D) / 108 mm (H) x 785 mm (W) x 308 mm (D)
- Temperature/Humidity: Operating +32°F to +113°F (0°C to +45°C) / 10% to 80%, non–condensing
- Enclosure Type: Metal
- Shipping Weight: 7.88 lbs. (3.58 kg)
- Vibration: NSTA 1A in carton
- Inputs
- Composite Video x12: RCA connector, 75 Ohm 0 to 0.7v, 480i input 59.94 fields per second
- Closed Caption: EIA/CEA–608 captions accepted over composite video input
- Stereo Audio Input x12: 3.5 mm stereo female, line level input per channel
- Video Encoder
- Encoder Video Profile: MPEG2 HD: ISO13818–2 MainProfile@HighLevel
- Average Encoding Data Rate: 18 Mbps per channel
- Encoder Audio Profile: ATSC A/52 (AC–3)
- GOP Size: 16
- Traffic Shaping: Variable Bit Rate
- Encoding Latency: Programmable 200 msec to 400 msec
- Video, Audio PID: Programmable starting value
- Video Encoding Data Rates: Variable, 10 Mbps — 24 Mbps per channel
- Color Profile: 4:2:0
- Program Information: Programmable program name, EIT
- Modulator/Upverter
- Modulation Types: QAM 256 and 64 (ITU–T J83 Annex B)
- Interleaving modes: (64,2) only
- Output Power: +45 dBmV typical
- I/Q Amplitude Imbalance: < 1% typical
- Cable Standard: HRC, IRC or STD
- Output Level Adjust: 25 — 45 dBmV in 1 dBmV steps
- Frequency Range: Single or one paired, frequency agile QAM RF CATV channels 2–135
- Frequency Resolution: 2 kHz
- Frequency Accuracy: +/– 30 ppm
- Frequency Stability: +/– 35 ppm
- MER: > 38 dB typical
- Simple Setup
- Network Interface: 10/100 Mb Ethernet via RJ45 connection
- IP Address: Displayed on the front panel
- IP Setup: DHCP (default) or static
- Configuration: Browser–based interface for quick and easy configuration
- Firmware: Easy firmware updates
- Settings: All settings are persistent
- Front Panel Color Display: Provides status, basic configurations, software revisions, and update options
