The Kramer BC-DGKat623-305M provides four shielded pairs of 23AWG solid copper for compatible Kramer twisted-pair AV systems. The 305m drum lets an installer cut and terminate each run to length.
BC-DGKat623-305M Detailed Features
- Prepare custom-length DGKat cable runs. The 305m drum supplies bulk twisted-pair cable for compatible Kramer AV systems. Installers can cut each run to match the route rather than work around fixed patch-cable lengths.
- Use solid copper conductors for permanent wiring. Four pairs of 23AWG solid copper form the cable's signal paths. Match the termination hardware to the conductor size and solid-conductor construction.
- Reduce pair-to-pair interference with foil shielding. Individual pair shields are part of the CAT6 U/FTP construction. Maintain the specified shielding arrangement through the connectors to support the intended link performance.
- Terminate with suitable shielded RJ45 connectors. The cable requires connectors appropriate for 23AWG conductors. It is supplied as bulk cable, so connector selection and installation are part of the cabling work.
- Allow for the cable's physical routing needs. The outside diameter is 7.2mm and the specified minimum bend radius is 35mm. Include these dimensions when sizing pathways and planning turns near equipment.
- Distinguish drum length from transmission reach. The 305m supply length does not mean a single AV signal can travel that distance. Maximum working reach depends on the connected transmitter, receiver, resolution, and installation.
Specifications
| Manufacturer part number | 99-0440300 |
|---|---|
| Length | 305m (1000ft) |
| Cable category | CAT6 U/FTP |
| Conductors | Four pairs of 23AWG solid copper |
| Pair shielding | Individual foil shields |
| Jacket color | Blue |
| Termination | Shielded RJ45 connectors suitable for 23AWG cable |
| Outside diameter | 7.2mm |
| Minimum bend radius | 35mm |
| Nominal impedance | 100 ohms |
Technical Questions and Answers
What does the BC-DGKat623-305M do?
The Kramer BC-DGKat623-305M provides four shielded pairs of 23AWG solid copper for compatible Kramer twisted-pair AV systems. The 305m drum lets an installer cut and terminate each run to length.
What is specified for length?
305m (1000ft)
What is specified for cable category?
CAT6 U/FTP
What is specified for conductors?
Four pairs of 23AWG solid copper
What is specified for pair shielding?
Individual foil shields
What is specified for jacket color?
Blue
What is specified for termination?
Shielded RJ45 connectors suitable for 23AWG cable
What is specified for outside diameter?
7.2mm
Choosing the Right Product
What is the Kramer BC-DGKat623-305M used for?
It is used for custom-length twisted-pair AV cable installation. Provides four shielded pairs of 23AWG solid copper for compatible Kramer twisted-pair AV systems. The 305m drum lets an installer cut and terminate each run to length.
Who should choose the BC-DGKat623-305M?
Choose this model when your project needs custom-length twisted-pair AV cable installation. Compare the model-specific connections and specifications above with the equipment in your system.
What should I check before ordering the BC-DGKat623-305M?
Confirm manufacturer part 99-0440300, the required connections and the installation requirements. Use the linked documentation to check compatible equipment and required accessories.
