This Kramer 3KAVE2IH HDb3000 Component/VGA RF/IP Media Module Blade is an HD video encoder/QAM modulator blade with two DIN inputs for Component video/digital and analog audio or VGA video/analog audio up to 1080p. Simultaneous MPEG−2 QAM RF and UDP IP streaming. Delay match analog audio out for analog audio input. Closed Captions supported on composite input. Requires HDb3000 Chassis and Hydra cables (sold separately). No ZvShow. NOTE: These modulators will not work with DirecTV H26K satellite receivers.
Kramer 3KAVE2IH HDb3000 Component/VGA RF/IP Media Module Blade Features:
- RF Modulation
- HDB3000 Blade
- 2 DIN inputs
- 1080p
- QAM or DVB–T/C output
- ZvShow
Why not buy this Kramer 3KAVE2IH HDb3000 Component/VGA RF/IP Media Module Blade from HDTV Supply today?
Kramer 3KAVE2IH HDb3000 Component/VGA RF/IP Media Module Blade Specification:
- General
- Power: 100 ~ 240 V AC, 50/60 Hz, 300 W capacity, IEC 60320–C14 jack
- Cooling: Four hot–swappable, N+1 redundant, high–capacity cooling fans
- Airflow: Front inlet, rear exhaust
- Operating Temperature: +32°F to +113°F (0°C to +45°C)
- Mounting: Standard 19-inch rack, 3RU height, front or rear mountable rack ears
- Dimensions (W x H x D): 17.4” x 5.1” x 14.75” (441 mm x 129 mm x 374 mm)
- Shipping Weight: 29.5 lbs (13.4 kg) including packaging
- Modulation Types
- QAM 256 and 64 (ITU–T J83 Annex B)
- DVB–T, DVB–C (ITU–T J83 Annex A) – varies by region
- Cable Standard
- QAM Standard, HRC, or IRC
- DVB–T & DVB–C user-defined (varies by region)
- CCIR Frequency Range
- QAM RF CATV: 54–864 MHz (Channels 2–135)
- Frequency must be within a 400 MHz band within the chassis
- CCIR Channels: 21–79, 57 MHz – 900 MHz
- Quality
- 2kHz resolution
- ±30 PPM accuracy
- ±35 PPM stability
- RF Output Level
- 13–34 dBmV in 1 dB increments
- MER
- Greater than 39 dB (typical)
- Simple Setup
- User Interface: ZeeVee Maestro
- Network Interface: 10/100 Mb Ethernet via RJ45
- IP Address: Displayed on front and back LCD screens
- IP Configuration: DHCP (default) or static
- Interface: Browser-based for easy configuration
- Firmware: Easy updates
- Settings: All configurations are persistent
